• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.7-12
• /
• 2019

To investigate the influence of the char layer formed during the combustion process on the pyrolysis of wood combustibles, ISO 5660-1 cone calorimetry experiments and Fire dynamics simulator (FDS) simulations were performed, and the results from these two methods were compared. The wood combustible selected as the fuel for this study, Douglas fir, has been widely used for the production of building materials, furniture, etc. The heat release rate (HRR) measured from the cone calorimetry experiment was in good agreement with the result predicted by the FDS simulation. However, the FDS simulation failed to predict the heat released by the smoldering combustion process, due to the absence of the char surface reaction in the model. The FDS simulation results clearly indicate that the char layer formed on the surface of combustibles produces a thermal barrier which prevents heat transfer to the interior, thickening the thermal depth and thus reducing the pyrolysis rate of combustibles.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.47-58
• /
• 2005

Rice straw is one of the main renewable energy sources in Korea, and bio-oil is produced from rice straw with a lab. scale plant equipped mainly with a fluidized bed and a char removal system. We investigated how the reaction temperature affected the production of bio-oil and the efficiency of a char removal system. To elucidate how the temperature depended on the production of bio-oil, experiment were conducted between $450^{\circ}C\;and\;600^{\circ}C$ with a feed rate of about 300g/h. The mass balance was established in each experiment, and the produced gas and oil were analyzed with the aid of GCs and a GC-MS system. The char removal system is composed of a cyclone and a hot filter. In the experiments, we observed that the optimum reaction temperature range for the production of bio-oil is between $450^{\circ}C\;and\;500^{\circ}C$.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.15-22
• /
• 2000

There are many intensive efforts to develop the recycling technologies of waste plastics in steel works to tackle the saving of resources and the protection of the natural environment. In this study, the thermogravimetric analyses for three kinds of plastics, the combustion experiments and the theoretical approach for calculating the flame temperature in the blast furnace had been performed to understand the behavior of plastics in the raceway. The thermal decompositions of plastics were studied using thermogravimetric analyzer under the atmospheric condition. The starting temperature of thermal decomposition and the maximum weight loss point were increased in proportion to the logarithmic values of heating rate. The combustion characteristics of plastics were simulated in a coke-bed combustor. The combustion efficiency of plastics was lower than that of pulverized coal. The oxygen enrichment was found out to be one of the useful methods to increase the combustibility of plastics in raceway. The maximum injection rate of plastics was calculated based on the flame temperature.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.248-251
• /
• 2018

Catalytic pyrolysis of the waste paper cup containing coffee residual (WPCCCR) was performed using a fixed bed reactor and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). Non-catalytic pyrolysis of WPCCCR produced a large amount of oil together with gas and char. The use of both HZSM-5 and HY decreased the yields of oil and increased the yield of gas due to the additional catalytic cracking. Owing to the acidic catalytic properties of HZSM-5 and HY, catalytic Py-GC/MS analysis of WPCCCR increased the selectivity to aromatic hydrocarbons in product oil. Owing to properties of HZSM-5 having a stronger acidity and medium pore size, the catalytic pyrolysis of WPCCR over HZSM-5 produced much larger amounts of aromatic hydrocarbons than that of using HY.

• Clean Technology
• /
• v.22 no.4
• /
• pp.292-298
• /
• 2016

In this study, the pyrolysis process was carried out in order to upgrade of heavy oil contained in the resources from Indonesia. In order to investigate the composition and basic properties of the heavy oil contained in the resources, the various analytical methods was used and then the TGA (thermogravimetric) method was especially used for the thermal degradation characteristics of heavy oil in the pyrolysis. From the results obtained from the various analytical methods, the reaction conditions such as the reaction temperature was collected for the pyrolysis process and the pyrolysis using the resources containing the heavy oil was conducted using the fixed-bed reactor under the various reaction conditions. Consequently, We found that the content of heavy oil contained in the resources was about 35% and the conversion of heavy oil and the recovery efficiency of thermal degradation oil were about 21 and 80%, respectively.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.94-101
• /
• 2011

The fast pyrolysis characteristics of lignocellulosic biomass are investigated for a bubbling fluidized bed reactor by means of computational fluid dynamics (CFD). To simulate multiphase reacting flows for gases and solids, an Eulerian-Eulerian approach is applied. Attention is paid for the primary and secondary reactions affected by gas-solid flow field. From the result, it is scrutinized that fast pyrolysis reaction is promoted by chaotic bubbling motion of the multiphase flow enhancing the mixing of solid particles. In particular, vortical flow motions around gas bubbles play an important role for solid mixing and consequent fast pyrolysis reaction. Discussion is made for the time-averaged pyrolysis reaction rates together with time-averaged flow quantities which show peculiar characteristics according to local transverse location in a bubbling fluidized bed reactor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.119-119
• /
• 2003

탄화규소나 열분해 탄소는 고온 특성 및 화학적인 안정성 이 우수하여 단미 혹은 코팅재로로 소재의 성능을 향상시키기 위하여 에너지 관련 분야, 반도체 치구 분야, 방위산업 및 항공우주 분야와 원자력 분야에서 다양하게 사용된다. 특히 원자력 분야에서는 고온형 원자로의 노심 요소 부품으로 적용 및 개발을 고려하고 있으며, 대표적인 예로 수소생산용 초고온 가스냉각로의 코팅 핵연료 입자를 들 수 있다. 일반적으로 TRISO라 불리는 가스냉각로 핵연료는 구형 $UO_2$ kemel의 주변을 PyC-SiC -PyC의 삼중 코팅층으로 둘러싸는 구조를 하고 있으며, 이 코팅층들은 kernel물질이 분열하는 동안 발생되는 내부 기체 압력을 견디는 압력용기 역할과 기체나 금속 핵분열 생성물들을 가두는 확산 장벽 역할을 하게 된다. 본 연구에서는 구형의 $UO_2$대신 선행연구를 위하여 구형 ZrO$_2$를 이용하여 증착온도나 시간 및 입력기체비 등의 화학증착 변수로 조절하여 SiC 및 PyC을 코팅하고, 각 변수들에 의한 증착층의 거동을 고찰하고자 하였다.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.672-677
• /
• 2012

Lipids in microalgal biomass were recovered by using pyrolysis method. The pyrolysis experiments of two Chlorella sp. KR-1 samples, which have triglyceride contents of 10.8% and 36.5%, respectively were carried out at $600^{\circ}C$ to investigate the effects of lipid contents in the cells on the reaction characteristics. The conversion and liquid yield of the lipid-rich sample were higher than those of the lipid-lean sample since its carbon to hydrogen ratio was low. There were low molecular weight organic acids, ketones, aldehydes and alcohols in the liquid products from both KR-1 samples, but the pyrolysis oil of the lipid-rich sample was abundant in free fatty acids, particularly palmitic acid, oleic acid and stearic acid while the content of nitrogen containing organic compounds was low. The microalgal pyrolysis oil had two layers composed of the light hydrophobic fraction and the heavy hydrophilic fraction. The light fraction might be originated from triglycerides and the heavy fraction might be from carbohydrates and proteins. In the light fraction of the liquid products, there were considerable linear alkanes such as pentadecane and heptadecane as well as free fatty acids, implying that deoxygenation reaction including decarboxylation was occurred during the pyrolysis. The yield of the liquid products from the pyrolysis of the KR-1 sample having triglyceride content of 36.5% was 56.9% and the light fraction in the liquid products was 68.2%. Also more than 80% of the light fraction was free fatty acids and pure hydrocarbons, thus showing that most triglycerides could be extracted in the form of suitable raw materials for biofuels.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.171.2-171.2
• /
• 2011

지속가능한 발전과 저탄소 녹색성장의 개념이 대두되면서 우리나라를 비롯한 주요 선진국은 자국의 화석연료 의존도를 낮추고 대체에너지로 환경친화적이며, 청정에너지로 각광받는 신 재생에너지의 활용에 경제적, 정책적 지원을 아끼지 않고 있는 실정이다. 실제로 유럽에서는 바이오매스의 일종인 우드칩을 활용한 가정용 보일러가 보급되고 있으며, 동남아시아에서는 열대식물을 이용한 저온열분해를 활용하여 바이오디젤을 생산하고 있다. 우리나라의 경우 대부분의 바이오매스는 발생되는 임야에서 재이용되거나 경제성이 있을 경우에 운송되어 재활용되고 있으며, 임부목과 같은 일부 바이오매스는 수익성이 없어 발생현지에 방치되는 경우도 있다. 본 연구에서 주목한 왕겨의 경우 미곡종합처리장에서 대량으로 발생되지만 그 활용도에 있어서 축적된 바이오에너지에 비해 에너지회수율이 저조하다고 할 수 있다. 왕겨는 임야에서 발생되는 폐목재나 다른 바이오매스에 비해 함유되어 있는 수분이 적고(12%), 휘발분의 함량이 많으며(58%), 고정탄소(17%), 회분(13%)로 열분해/가스화에 적용가능하다. 본 실험에서 생산된 합성가스의 활용방법으로는 보일러를 이용한 스팀 및 전력생산, 가스엔진을 이용한 전력생산, 폐열회수 등이 있으며 생산된 합성가스를 활용하기 위해서는 오염물질의 정제특성에 대한 연구가 선행되어야 한다. 따라서 본 연구에서는 합성가스 내에 존재하는 분진, 타르, HCl, HCN, $NH_3$의 제거효율을 조사하였다.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.94-97
• /
• 2007

Carbon nanotubes and nanowires were prepared by methane pyrolysis over Pd(5)/SPK catalyst by changing oxygen molar ratio in a fixed bed flow reactor under atmospheric condition and also analyzed by SEM and TEM. When the $CH_4/O_2$ molar ratio was 1, carbons were not almost deposited on the catalyst bed support, but when it was 2, carbons were deposited as much as plugging reactor. TEM and SEM images for the deposited carbons showed a number of single-walled carbon nanotubes and carbon nanowires. The growth mechanism of carbon nanotubes produced on the catalyst surface was the tip growth mode. It should be played an important role in carbon nanotubes and nanowires produced on the catalyst bed support to formate the carbon growth velocity vectors and nuclei of ring structure of carbon nanowires. SPK carrier was $N_2$ isotherm of IV type with mesopores, and excellent in the thermal stability.