• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.132-135
• /
• 1979

The thermal decomposition of a dilute mixture of 1,1,2,2,-$C_2H_2F_4$ in argon has been investigated in a single-pulse shock tube between 1146 and $1232^{\circ}K$ at total reflected shock pressures of about 3000 torr. Under these conditions the reaction proceeds exclusively by the molecular elimination of hydrogen fluoride. It has been found that the asymmetric isomer with the fully fluorinated ${\alpha}$-carbon requires the higher activation energy which may be attributed to the difference in atomic charge densities between isomers. The rate constant ratio is given by $log(k_1/k_2) = -0.069 {\pm} 0.021 ＋(1388{\pm}113) / 2.303RT$ in good agreement with previous independent studies.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.54-58
• /
• 2009

A substitute energy development has been required due to the exhaust of the fossil fuel and an environmental problem. Consequently, possible technologies producing hydrogen from water that does not release carbon is a very promising technology. Also, Iodine-Sulfur(IS) thermochemical water decomposition is one of the promising processes that are used to produce hydrogen efficiently using the high temperature gas-cooled reactor(HTGR) as an energy source that is possible to supply heat over 900$^{\circ}C$. In this study, to make a initiating events identification for the IS process, Master Logic Diagram(MLD) is used and 9 initiating events that cause a leakage of the chemical material are identified. Also, 6 events are identified among 9 initiating events above and are quantified using event tree.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.618-624
• /
• 2013

Hydroquinone bis(trimellitic anhydride) (HQ-TA) was synthesized from trimellitic anhydride chloride and hydroquinone. Poly(amic acid)s (PAAs) were synthesized by reacting a HQ-TA with six different diamines, which were cyclized to yield polyimides (PIs) containing ester linkages by chemical- and thermal-imidization methods. The various PIs were synthesized from structurally different aromatic diamines. The glass transition temperatures ($T_g$) were in the range of 167-$215^{\circ}C$, and the decomposition temperatures (${T_D}^i$) were in the range of $364-451^{\circ}C$. The maximum improvements in coefficient of thermal expansion (CTE) and barrier to oxygen permeation were observed in PIs using TFB (3.23 $ppm/^{\circ}C$) and 4,4-ODA (< $10^{-2}cc/m^2/day$), respectively. The PI films possessed a transmittance of 65-89% at 500 nm and had a yellowish color with a yellow index (YI) of 3.01-69.52.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.31-38
• /
• 2016

Most of propellants that is used widely in the world release toxic gases such as methane gas and carbon dioxide during combustion which are noxious to the environment. This study established a synthetic process of a high nitrogen containing derivative of triazole, 4,5-bis(azidomethyl)-methyl-1,2,3-triazole (DAMTR), which can be applied as energetic plasticizer to environmental concerns. Also, the compound was characterized by NMR, IR spectroscopy, and physical properties such as glass transition temperature, melting point, decomposition temperature, density, impact sensitivity, viscosity and volatility were measured. In addition, the heats of formation (${\Delta}H_f$) and detonation properties (pressure and velocity) of DAMTR were calculated using Gaussian 09 and EXPLO5 programs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.1-8
• /
• 2019

In this study, Arc plasma was employed for the thermal decomposition of nitrous oxide($N_2O$). Conventional ignition systems such as torch, spark, and catalyst systems, have disadvantages in that they are not reliable and do not provide rapid responses. Therefore, this study suggests the plasma application of plasma to overcome the problems of conventional ignition methods. A gas temperature and combustion experiment was carried out to investigate the feasibility to a novel igniter. The gas temperature was measured around $960^{\circ}C$ at 1 g/s, 0.7 A at the nearest wall. In addition, a combustion test was successfully conducted in 3.1 sec after the plasma discharge was initiated with a main flow rate of 10 g/s. The energy consumption for ignition was 1,780 J(574 W).

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.68-73
• /
• 2019

We prepared hydrophobic silica particles by a sol-gel process from tetraethyl orthosilicate (TEOS), followed by coupling the reaction with octyltrimethoxysilane (OTMS) or hexadecyltrimethoxysilane (HDTMS) under various reaction conditions. We confirmed the extent of silica surface modification with organic compounds by SEM-EDS, thermogravimetry and elemental analysis. The silica particles obtained after the hydrolysis reaction of TEOS in ethanol at $50^{\circ}C$ for 24 h and the coupling reaction with OTMS for 2 h at the same temperature displayed the optimum performance in terms of the dispersity in an organic solvent and the surface roughness of films composited with epoxy resins. The oxygen permeability of the composite film with modified-silica was 12% lower than that of using the film without modified-silica.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.30-38
• /
• 2002

Disordered carbon and boron-substituted disordered carbons $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ were synthesized by Pyrolysis of LPG(liquid Propane gas)and $BCl_3$. Their electrochemical properties as anode materials for Li-ion secondary batteries were then investigated. When PVDF is added to the sample in a weight ratio 5 : 95, the disordered carbon with x=0.00 had the first discharge capacity 374 mAh/g. Its cycling performance was relatively good from the second cycle and it had the discharge capacity 258 mAh/g at the 10th cycle. When PVDF is added to the sample in a weight ratio 5 : 95, the sample with x=0.05 among the samples $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ exhibited the largest first discharge capacity 860 mAh/g and discharge capacity 181 mAh/g at the 10th cycle. All the samples had similar cycling performances from the second cycle. The sample $C_{0.90}B_{0.10}$ showed the best electrochemical properties as a anode materials fur Li-ion secondary battery from the view points of the first discharge capacity(853 mAh/g when $10w1.\%$ PVDF is used), cycling performance, discharge capacity(400mAh/g at the 10th cycle when $10wt.\%$ PVDF is used). All the samples showed generally larger charge and discharge capacities when $10wt.\%$ PVDF ratter than $5wt.\%$ PVDF is used. The plateau region in the range of voltage lower than 1.25V becomes larger probably since the structure becomes less disordered by the addition of boron. When boron is added, the charge and discharge capacities decreased suddenly at the second cycle. This may be become only a part of Li are reversibly deintercalated and intercalated and a part of Li which are strongly combined with B are not deintercalated. The increases in charge and discharge capacities are considered to be resulted from the increase in the potential of Li in the boron-added carbons, caused by the strengthening of the chemical bond between the intercalated Li and the boron-carbon host since the boron acts as electron acceptor.

• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.18-23
• /
• 2002

Efficiency estimation of toxicity free resistance cable experiments were conducts to understand toxicity free fire ersistance polyolefin insulation material and smoke density characteristic and combustion gas corrosion analysis. A main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated fire resistance cable materials. In this paper, Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5$\pm40.04〔w/$\textrm{cm}^2$〕for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. Also, the fire gases was occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC which has high content of carbon in chemical compound.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.1
• /
• pp.313-348
• /
• 1999

이 논문은 독일어의 겹자음회피현상을 설명함에 있어 어휘음운론에서의 분석이 보이는 문제들을 지적하고, 이 문제들이 제약에 바탕을 둔 이론에서는 어떻게 해결될 수 있는가를 보인다. 제약들간의 상호작용에서 특히 중요한 역할을 하는 것이 단일형태실현제약 (Uniform Exponence)으로서, 이 제약을 통해 독일어 동사의 현재시제, 단수, 2인칭 형태와 3인칭형태에서 나타나는 겹자음회피현상이 동사의 어형변화표 (Verbparadigma)와 밀접한 관련이 있음을 알 수 있다. 이는 규칙들을 통해 2인칭과 3인칭의 올바른 형태를 각각 개별적으로 찾아내는 어휘음운론의 분석과는 근본적으로 다르다. 왜냐하면 어휘음운론의 분석에 따를 때, 예를 들어 3인칭 동사 arbeitet에서 Schwa 모음의 삽입은 겹자음회피를 위해 일어난다고 설명되지만 겹자음이 없음에도 불구하고 Schwa 모음이 마찬가지로 삽입되는 2인칭동사 arbeitest는 설명되지 않기 때문이다. 이런 분석에서는 2인칭 형태와 3인칭 형태가 서로 아무런 관련 없이 각기 따로 존재하게된다. 이에 반해 단일형태제약은 이 두개의 형태를 동시에 비교하므로, 동사 굴절형태에서 마치 불필요한 것으로 보이는 모음삽입이나 자음탈락의 원인에 대해 이론적인 근거를 제시할 수 있다. 즉 2인칭 형태와 3인칭 형태는 보다 상위의 제약들이 막지 않는 한 서로 최대한 비슷한 형태를 가지려고 한다. 이 논문은 겹자음 회피를 위한 수단으로서 모음삽입이나 자음탈락은 오로지 이를 통해 동사의 어형변화표가 좋아질 때만 가능하다는 것을 보여줌으로써 규칙이론이 포착하지 못하고 있는 중요한 일반화를 제시하고 있다. 단일형태 실현제약의 중요성은 접두사 in- 과 un- 이 어간과 결합할 때 보이는 대조를 통해서도 확인된다. 여기서도 어휘음운론의 다층어휘부 구조에 의한 설명이 갖는 문제점이 제약들간의 상호작용을 통해 해결될 수 있음을 알 수 있다.VII-1 및 VII-2공의 3600 m 하부층은 건성 가스 생성 단계에까지 도달한 것으로 나타났다. JDZ VII-1, VII-2 시추공의 3500 m 하위 구간의 올리고세 퇴적층에서 유기물 함량 및 수소 지수가 급격히 감소하는 것은 매몰 심도가 깊어지면서 유기물이 열 분해되어 이미 탄화수소를 생성한 것으로 해석된다. JDZ VII-1 및 VII-2 시추공의 가스징후 및 길소나이트 (gilsonite)는 탄화수소가 생성되어 이동한 흔적을 시사한다.을 해석할 수 있음을 보여주는 것으로 평가된다. 다만 PLAYMAKER2가 보다 신뢰할 만한 퇴적환경 해석을 위한 전문가 시스템으로 구축되기 위해서는 향후 많은 퇴적학 전문가들이 추가로 참여하여 기존 규칙들을 재검증하고 새로운 규칙들을 첨가함으로써 보디 세련된 지식베이스를 개발하여야 할 것으로 판단된다.이며 세 개의 산소가 이루는 평면에서 $1.68{\AA}$ 소다라이트내로 이동하여 위치한다. 32개의 $Tl^{+}$ 이온은 결정학적 자리 II에 존재하고 있으며 산소와의 결합거리를 $2.70(1){\AA}$을 유지하면서 큰 동공속으로 $1.48{\AA}$ 이동하여 위치한다. 약 18개의 $Tl^+$ 이온은 결정학적 자리III에, 또 다른 10개의 $Tl^+$ 이온은 결정학적 자리III'에 존재하고 골조 산소와 각각 $2.86(2){\AA},\;2.96(4){\AA}$의 결합거리를 이룬다.

• Clean Technology
• /
• v.23 no.2
• /
• pp.121-132
• /
• 2017

The increase of greenhouse gases and the concern of global warming instigate the development and spread of renewable energy and hydrogen is considered one of the clean energy sources. Hydrogen is one of the most elements in the earth and exist in the form of fossil fuel, biomass and water. In order to use hydrogen for a clean energy source, the hydrogen production method should be eco-friendly and economic as well. There are two different hydrogen production methods: conventional thermal method using fossil fuel and renewable method using biomass and water. Steam reforming, autothermal reforming, partial oxidation, and gasification (using solid fuel) have been considered for hydrogen production from fossil fuel. When using fossil fuel, carbon dioxide should be separated from hydrogen and captured to be accepted as a clean energy. The amount of hydrogen from biomass is insignificant. In order to occupy noticeable portion in hydrogen industries, biomass conversion, especially, biological method should be sufficiently improved in a process efficiency and a microorganism cultivation. Electrolysis is a mature technology and hydrogen from water is considered the most eco-friendly method in terms of clean energy when the electric power is from renewable sources such as photovoltaic cell, solar heat, and wind power etc.