• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.61-72
• /
• 2003

Recently, demands with practical applications using high resolution imagery are increasing, according to addressing new sensor data. Since late 1990s, attempts for application to transportation problems of satellite imagery data have been intensively carried out in US, and these kinds of studies are being categorized into the name of RS-T(remote sensing in transportation). Further, this study is also linked with GIS-T(GIS for transportation), being in the matured stage, and then it contributes to wide uses of remotely sensed imagery. In this study, RS-T is briefly summarized. Later, in order to apply urban transportation analysis with satellite imagery as ancillary data, implementation, as prototyped extension program, for extraction of gravity-typed accessibility indices of transportation geography is performed in the ArcView-GIS environment. It is thought that applied results by two models among implemented models in this study can be utilized to characterize transportation accessibility in a region and to apply as useful statistics related to urban transportation status for regional transportation planning, if time series data are used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4469-4474
• /
• 2014

This paper proposes a novel analysis method on the driving performance of LIM (linear induction motor) by FEM (finite element method). First, a linear model was converted with a rotation model to perform the dynamic analysis for a long time. Through the FEM model, the slip parameter for the control algorithm could be induced effectively. The LIM for the traction system was performed at a constant V/f in the region of constant torque, and a constant V and variable f in the region of constant power. Several slip characteristic curves according to the voltage and frequency were calculated by FEM in advance. The driving performance was then induced by interpolating the slip characteristic curves according to the load of the vehicle.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2011

The objective of this paper is to evaluate the performance of low $CO_2$ asphalt binder properties using LEADCAP$^{(R)}$(Low Energy and Carbon Asphalt Pavement) additive as function of various aging methods such as RTFO(Rolling thin film oven), Ultraviolet(UV) lay. In order to simulate the short-term aging of asphalt binder that occurs during the hot-mixing asphalt process, the Rolling Thin Film Oven(RTFO) was used. Asphalt binder using LEADCAP$^{(R)}$ is prepared by addition of a photoinitiator activated by ultraviolet lay. The mechanical and rheological properties of the asphalt binder were estimated using UTM(Universal Testing Machine) and DSR(Dynamic Shear Rheometer). The test results showed that the asphalt binder using LEADCAP$^{(R)}$ additive was improved the rutting resistance at testing temperature ($70^{\circ}C$) and increased tensile strength at low temperature. Also, Thermal analysis shows that the Melting Point(Tm) of asphalt binder using LEADCAP$^{(R)}$ additive was constant although the asphalt binder was aged by Ultraviolet.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.247-250
• /
• 2001

We have fabricated and evaluated a new Si pin photodiode for red light detection with the web patterned $p^{+}$ -shallow diffused region in the light absorbing area. From the measurements of electro-optical characteristics under the bias of -5V, the junction capacitance of 4pF and the dark current of 235pA were obtained. When the 1.6㎼ optical power with peak wavelength of 670nm was incident on the device, the optical signal current of 0.48$\mu\textrm{A}$ and the responsivity of 0.30A/W were obtained. The fabricated device showed the improved sensitivity compared to the conventional circular type device and the maximum spectral response in a spectrum of 670~700nm. The web-patterned Si photodiode can be expected to have the good discrimination characteristics between digital signals in the application of red light optics.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.86-94
• /
• 2000

In order to extract the spatio-temporal characteristics of long-term variability of the net heat flux on the sea surface in the East Asian marginal seas, empirical orthogonal function (EOF) analysis was conducted using data set calculated every 12 hours interval during 1978-1995. Among the first three modes explaining 73% of the total variance, the first mode having high peak at 1 year period indicates high variability area around the Sandong Peninsula and central and northeastern part of the East Sea. In the second mode which has spatial distribution of dipole type at the north and south, the peaks appear at 3.6 year and 2.3 year cycles. Time coefficient of the second EOF is believed to have close relation with the E1 Nino and has out-of-phase variation with NINO3 SST. Lagged correlation between NINO3 SST and time coefficient of the second EOF indicates four month time delay in the NINO3 SST. In the third mode which has opposite sign at the east and west, the periodicity of 6-9 year cycle has relatively clear appearance compared to other two EOFs. Also, high heat loss exceeding 800 W/$m^{2}$ in winter time occured at the south part of the Sandong Peninsula and Vladivostok. It reveals more frequent occurrence of about two times at the Sandong Peninsula than Vladivostok. The event is concentrated in January at Vladivostok, but it occurs primarily in December and January at the Sandong Peninsula.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.382-391
• /
• 2002

This study is devoted to the problems of thermal and shrinkage stresses in order to avoid cracking at early ages. The early-age damage induced by volume change has great influence on the long-term structural performance of the concrete structures such as its durability and serviceability To solve this complex problem, the computer programs for analysis of thermal and shrinkage stresses were developed. In these procedures, numerous material models are needed and the realistic numerical models have been developed and validated by comparison with relevant experimental results in order to solve practical problems. A framework has been established for formulation of material models and analysis with 3-D finite element method. After the analysis of the temperature, moisture and degree of hydration field in hardening concrete structure, the stress development is determined by incremental structural formulation derived from the principle of virtual work. In this study, the stress development is related to thermal and shrinkage deformation, and resulting stress relaxation due to the effect of early-age creep. From the experimental and numerical results it is found that the early-age creep p)ays important role in evaluating the accurate stress state. The developed analysis program can be efficiently utilized as a useful tool to evaluate the thermal and shrinkage stresses and to find measures for avoiding detrimental cracking of concrete structures at early ages.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.22-28
• /
• 2015

In order to keep the competitiveness of LPG fuel for transportation fuel, the difference in fuel consumption with gasoline and cost for an aftertreatment system should be reduced with continuous development of technology for LPG engine. In the present study, spray-guided type direct injection combustion system, whose configuration is composed of direct injector in the vicinity of spark plug, was employed to realize stable lean combustion. A certain level of nitrogen oxides($NO_x$) emits due to a locally rich mixture regions in the stratified mixture. With the application of EGR system for the reduction of $NO_x$, 15% of $NO_x$ reduction was achieved whereas fuel consumption and hydrocarbon emission increased. By the application of EGR, the combustion speed reduced especially appeared at initial flame development period and peak heat release rates and increasing rates for heat release rate decreased as EGR rate increased due to the dilution effect of intake air.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.147-156
• /
• 2010

There are four key factors for gas-phase biofilters; biocatalysts(microorganisms), packing materials, design/operating techniques, and diagnosis/management techniques. Biofilter performance is significantly affected by microbial community structures as well as loading conditions. The microbial studies on biofilters are mostly performed on basis of culture-dependent methods. Recently, advanced methods have been proposed to characterize the microbial community structure in environmental samples. In this study, the physiological, biochemical and molecular methods for profiling microbial communities are reviewed, and their applicability to biofilters is discussed. Community-level physiological profile is based on the utilization capability of carbon substrate by heterotrophic community in environmental samples. Phospholipid fatty acid analysis method is based on the variability of fatty acids present in cell membranes of different microorganisms. Molecular methods using DNA directly extracted from environmental samples can be divided into "partial community DNA analysis" and "whole community DNA analysis" approaches. The former approaches consist in the analysis of PCR-amplified sequence, the genes of ribosomal operon are the most commonly used sequences. These methods include PCR fragment cloning and genetic fingerprinting such as denaturing gradient gel electrophoresis, terminal-restriction fragment length polymorphism, ribosomal intergenic spacer analysis, and random amplified polymorphic DNA. The whole community DNA analysis methods are total genomic cross-DNA hybridization, thermal denaturation and reassociation of whole extracted DNA and extracted whole DNA fractionation using density gradient.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.22-28
• /
• 1996

고주파 이동통신의 효용이 증가할수록 고주파 회로에 들어가는 부품들의 소형화가 중요한 과제로 대두되고 있다. 인덕터는 전자회로에 이용되는 주요 부품의 하나이며, 현재 교주파용 소형 인덕터를 박막화하려는 시도가 진행중이다. 본 연구에서 열산화시킨 Si(100)기판위에 성공적으로 박막형 인덕터를 제조하였다. Core 물질로는 ion beam sputtering 법으로 증착한 Ni-Zn 페라이트와 PECVD법으로 증착한 SiO2를 사용하였다. 고온산화분위기의 박막 증착과정을 고려하여 귀금속류인 Au를 전극으로 이용하였으며, life-off법으로 미세회로를 구현하였다. 상하부 전극의 안정적인 연결을 위하여 2차 전극배선 전에 via를 채워넣었다. 제조된 박막 인덕터의 고주파 특성은 network analyzer로 측정한 후 HP사의 Mecrowave Design System으로 분석하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.53-58
• /
• 2001

In this paper to develop objective speech quality measure for CDMA telephone network environments, recent developed measures are investigated first. But those measures show low performances in CDMA telephone networks. To solve this problem, new objective speech quality measure adopting noise masking threshold is proposed and studied. To acquire better performance, scaled noise masking threshold calculation for speech signals is employed instead of conventional tone signals. To verify effectiveness of proposed method performance comparison experiments are carried out for CDMA telephone network speech databases, for the results proposed methods show improved performances compared to existing meaures.