• Composites Research
• /
• v.26 no.3
• /
• pp.155-159
• /
• 2013

This paper reviewed the continuous fiber tow spreading technologies and its applications. The effect of the continuous fiber tow spreading in manufacturing process of continuous fiber reinforced thermoplastic composite was introduced theoretically. The fiber tow spreading technologies were categorized according to the spreading medium and its order during manufacturing process. The general principles, the applications, and the merits and demerits of fiber tow spreading technologies were introduced. Furthermore, the proposal for future direction of research on this issue was considered in this study.

• Composites Research
• /
• v.19 no.6
• /
• pp.32-37
• /
• 2006

This paper summarizes the processing inorganic continuous fibers from Korean minerals. Continuous filament fibers have been produced from two rocks, basalt and quartz diorite porphyry(QDP), by melting method. The essence of the method is that the vitrified materials was placed into the bushing, platinum/rhodium alloy crucible with a nozzle, and heated electrically to a temperature which allowed fiber spinning. Vitrified basalt without additive was suitable for producing continuous filament fiber. However doping quartz diorite porphyry with boric oxide yielded a material which could be pulled continuously.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.197-202
• /
• 1998

연속 섬유공정은 섬유물이 이동하는 가운데 연속적으로 기계적인 처리 또는 물리/화학적 가공이 행하여진다. 따라서 원료의 공급속도 (feeding speed)와 생산되는 제품의 방출속도(delivery speed)사이에 정확한 속도비를 유지하는 것은 공정처리를 받고 있는 섬유물에 가해지는 부하를 일정하게 하므로써 제품의 물리적, 화학적 성질을 균일하게 하여 품질유지에 큰 영향을 미치게 된다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.04a
• /
• pp.44-48
• /
• 1999

• Composites Research
• /
• v.26 no.4
• /
• pp.230-234
• /
• 2013

The continuous glass fiber reinforced poly-lactic acid (PLA) composite was manufactured by direct melt impregnation. The mechanical and thermal properties of continuous glass fiber reinforced PLA composite were observed. Measured properties were compared with the reference values of neat PLA and the injection molded glass fiber/ PLA composite. The continuous glass fiber reinforced PLA composite having a fiber volume fraction of 27.7% shows enhanced tensile strength of 331.1 MPa, flexural strength of 528.6 MPa, and flexural modulus of 24.0 GPa. The enhanced heat deflection temperature (HDT) and the increased cystallinity were also observed. The degree of impregnation as a function of pulling speed was also assessed. The degree of impregnation at the pulling speed of 5 m/min was over 90% in this research.

• Composites Research
• /
• v.33 no.6
• /
• pp.346-352
• /
• 2020

In mobility industries, the use of thermoplastic composites increased dynamically. In this study, the mechanical and impregnation properties of continuous glass fiber (GF)/polypropylene (PP) composite were evaluated with different GF contents. The GF/PP commingled fiber was manufactured with different GF contents and continuous GF/PP composite was manufactured using continuous compression molding process. Tensile, flexural, and impact test of specimens were evaluated with different GF contents. The fracture behavior of specimens was proved using field emission-scanning electron microscope images of fracture area and impregnation property was evaluated using dynamic mechanical analyzer and interlaminar shear strength. Finally, the GF/PP composite was the optimized mechanical and impregnation properties using 50 wt.% GF/PP commingled fiber.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.387-397
• /
• 2015

In the present study, to enhance the constructability, a composite slab system using deck plate and micro steel fiber concrete was studied. In the proposed slab system, on-situ re-bar placement is not required. Steel fibers replace the temperature reinforcement. The present study focused on the crack control at the slab top in the continuous composite slab without spliced bars. Eight continuous slabs with various parameters were tested under vertical loading. The test parameters were the amount and types of micro steel fibers, types of deck plate, and the use of top bars in the continuous slab. To evaluate the crack resistance of the slabs, crack widths were measured in the continuous slabs. The test results showed that although the top spliced bars were not used, cracking were restrained by large flexural stiffness of the composite sections.

• Composites Research
• /
• v.23 no.3
• /
• pp.43-49
• /
• 2010

Basaltic fiber was prepared by continuous spinning process from Jeju Pyosun raw basalt materials. First, for confirming the melting characterization of basalt, basalt raw material put into Pt crucible and melted up to $1550^{\circ}C$ then quenched by dropping it into water. After quenching, the optimum fiber spinning conditions were investigated by measurement and analysis of XRD, TMA, high temperature viscosity, high temperature conductivity and high temperature microscope. The optimum spinning temperature and viscosity for preparation of continuous filament fiber were $1264^{\circ}C$ and $10^{2.8}$ poise at $1264^{\circ}C$, respectively. Properties of prepared spinning fiber were confirmed by tensile strength, FE-SEM, heat resisting test and others. The tensile strength of fiber prepared by spinning conditions of the bushing temperature $1240^{\circ}C$ and winder speed 4600rpm was 3660MPa.

• The Korean Journal of Rheology
• /
• v.8 no.2
• /
• pp.92-102
• /
• 1996

두 종류의 열방성 액정고분자와 세종류의 엔지니어링 고분자와의 블렌드들에 대해 유변학적/형구학적 연구를 한 결과 블렌드의 유동거동과 물성이현저히 다른 두 그룹으로 나 뉘어짐을 발견하였다. 즉 연속상의 조업온도가 분산상의 전이온도보다 높은 그룹A에 속하 는 블렌드의 전단점도/신장점도는 액정고분자를 첨가할수록 첨가할수록 감소하고 블렌드의 신장점도는 연속상의 그것처럼 신장변형률속도가 커질수록 증가하였다. 또한 분산상의 점도 가 연속상의 그것보다 작아서 분산상이 미세섬유구조의 형태로 존재하였다. 이와 대조적으 로 연속상의 조업온도가 액정고분자의 전이온도보다 낮은 그룹 B에 속하는 블렌드는 반대 의 거동을 보였고 분산상의 미세섬유구조가 존재하지 않았다. 그러나 연신변형이 주가 되는 방사공정을 거치면 그룹A와 B블렌드 공히 분산상이 비슷한 미세섬유구조의 형태로 존재하 고 기계적 성질도 크게 향상되는 결과를 보였다. 이는 블렌드내의 신장유동이 분산상의 섬 유구조형상에 결정적 역할을 하기 때문이라 판단된다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.190-196
• /
• 1998

섬유공정은 대부분 섬유물이 연속적으로 이동하는 가운데 기계적인 처리 또는 건식/습식가공이 행하여진다. 이러한 공정에서는 원료의 공급속도 (feeding speed)와 생산되는 섬유제품의 방출속도(delivery speed)사이에 정확한 속도비를 유지하는 것이 필요하다. 공급속도와 방출속도와의 차이는 공정처리를 받고 있는 섬유물에 이동방향으로 긴장, 느슨함 또는 중첩을 일으킨다.(중략)