Expert system for automating HAZOP analysis of batch processes In contrast with continuous processes must consider the discrete variables such as time and sequence. So in this study, we have developed the expert system for automating HAZOP analysis of batch processes to analyse time and sequence on the basis of the relation between discrete variables and continuous ones. Because these variables can not be explained by the method used in the HAZOP analysis of continuous processes. The proposed expert system have been discussed on a Latex batch process to evaluate its effectiveness.
Park, Yong-Seok;Park, Ho-Gyun;Jeong, Jin-A;Choe, Gwang-Hyeok;Kim, Han-Gi
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.196-196
/
2010
본 연구에서는 플렉시블 GZO 단일 박막과 GZO/Ag/GZO (GAG) 다층 박막을 연속 성막이 가능한 롤투롤 스퍼터링 시스템을 이용하여 상온 공정을 통해 성막하여 그 특성을 분석 하였다. 일반적으로 고품위의 GZO 박막을 제작하기 위해서는 고온 공정이 필수적인 것으로 알려져 있으나 본 실험에서는 플렉시블 PES 기판상에 상온 공정을 통해 후 열처리 없이 고품위의 GZO, GAG 박막을 얻을 수 있었다. 단일 GZO 박막은 공정 압력과 산소 유입량을 변화하여 제작하였고 GAG 다층 박막은 GZO-Ag-GZO로 이루어진 3개의 sputter gun을 이용하여 Ag 두께를 변수로 연속공정을 통해 제작하였다. 구조적, 표면석 특성 분석을 위해 XRD(X-ray diffraction), FE-SEM(Field emission scanning electron microscopy), HRTEM (High resolution electron microscopy)를 이용하였으며 광학적, 전기적 특성을 분석하기 위해 UV/Vis spectrometer, Hall effect measurement를 각각 이용하였다. 최적화된 GZO 단일 박막은 상온에서 열처리 없이 성막되었음에도 불구하고 38 ohm/sq의 낮은 저항과 86 %의 높은 투과도를 나타내었으며 GAG 다층 박막은 12 nm의 Ag 두께에서 6.4 ohm/sq의 낮은 저항과 88 %의 높은 투과율을 나타내었다. 특히 기계적 특성을 분석하기 위해 진행된 bending test에서 GAG 박막은 초기와 test 후에 저항과 표면에 변화가 없는 우수한 특성을 보였으며 이를 통해 플렉시블 태양전지와 디스플레이등 광학소자의 투명 전극으로서의 적용 가능성을 확인 할 수 있었다.
Highly efficient and environmentally friendly mechanical process was developed for the higher recovery rate and productivity in the recycling of waste jelly-filled communication cables. Only the simplest mechanical method was designed and built for a continuous process, further proved experimentally along with the addition of several parts such as brush-type rollers and scrappers. In this process, the recovery rate and productivity were 98% and 55 Kg/hr respectively. This process is thought to be simple but highly advanced method for the commercialization of green process.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2015.11a
/
pp.205-205
/
2015
PVD 기술이 반도체나 LCD 등의 전자산업에서 주력기술로 성장하는 과정에서, 금속 Strip 소재에 연속적으로 PVD 코팅을 실시하기 위한 연구개발과 상용화 노력이 진행되어왔다. 이미 1960년대에 강판 표면에 Al을 증착시키기 위한 공정이 상용화된 실적이 있었지만, 전기도금이나 용융도금에 비해 기술의 확산이 빠르게 이루어지지 않았고, 1980년대 후반에 일본에서 전기도금을 대체하기 위한 공정으로 상용화공정을 건설하였지만, 결국은 경제성을 확보하지 못하여 도태되는 과정을 겪어왔다. 하지만, 1990년대 이후 유럽과 한국을 중심으로 연속코팅기술에 대한 연구개발이 꾸준히 진행되어 왔으며, 최근 이슈가 되고 있는 자동차용 초고강도강의 코팅기술로 PVD 기술이 재조명되고 있다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2012.05a
/
pp.318-318
/
2012
최근 고급스러운 표면을 가지는 제품의 수요가 증가함에 따라 pore를 통하여 rough한 표면을 구현하고 광택을 줄인 사틴 도금이 각광받고 있다. 사틴 효과를 구현하기 위하여 도금 용액에 첨가되는 첨가제의 종류 중 에멀젼 타입의 사틴 첨가제는 시간이 경과함에 따라 첨가제 입자들의 뭉침 현상이 발생하기 때문에 건욕 후 2시간이 경과하면 사틴 효과가 감소하게 되고 연속 공정이 불가능하다. 이에 본 연구에서는 크기가 증가한 첨가제 입자들만을 제거한 후 첨가제를 소량씩 재첨가하여 사틴 니켈의 연속 공정이 가능하도록 필터링 및 첨가제 보충이 가능한 필터링 시스템을 도입하였다. 필터링 시스템에 의하여 2시간 경과 후 발생되는 뭉쳐진 첨가제가 선택적으로 제거 되어 pore의 크기를 제어할 수 있었으며 제거된 첨가제는 재첨가로 인해 보충되어 pore의 크기와 개수도 유지 할 수 있었다.
철강제조공정에서 강판을 만드는 공정이 압연이다. 압연공정은 연속주조 공장에서 생산되는 Steel Slab, Bloom, Billet등의 반제품을 높은 온도로 재 가열하고 물리적인 힘을 가해 압연하는 열간압연(이하 열연)과 열연으로 얇아진 강판을 열을 가하지 않고 냉각상태에서 압연하는 냉간압연으로 나뉜다. 본 원고에서는 열연 공정의 가열로 온도제어에 적용한 MFA(Model Free Adaptive Controller)를 소개하고자 한다.
Since continuous media such as video and audio data are displayed within a certain time constraint, their computation and manipulation should be handled under limited condition. Traditional real-time scheduling algorithms cold be directly applicable, because they are not suitable for multimedia scheduling applications which support many clients at the same time. Rate Regulating Proportional Share Scheduling Algorithm based on the stride scheduler is a scheduling algorithm considered the time constraint of the continuous media. The stride schedulers, which are designed to general tasks, guarantee the fairness of resource allocation and predictability. The key concept of RRPSSA is a rate regulator which prevents tasks from receiving more resource than its share in a given period. But this algorithm loses fairness which is a strong point of the stride schedulers, and does not show graceful degradation of performance under overloaded situation. This paper proposes a new modified algorithm, namely Modified Proportional Share Scheduling Algorithm considering the characteristics of multimedia data such as its continuity and time dependency. Proposed scheduling algorithm shows graceful degradation of performance in overloaded situation and it reduces the scheduling violations up to 70% by maintaining the fair resource allocation. The number of context switching is 8% less than RRPSSA and the overall performance is increased.
Park, Young Cheol;Jo, Sung-Ho;Jin, Gyoung Tae;Lee, Seung-Yong;Yi, Chang-Keun
한국신재생에너지학회:학술대회논문집
/
2010.06a
/
pp.107.2-107.2
/
2010
고온건식탈황기술은 고온고압에서 석탄가스에 함유된 황화합물을 제거하는 기술로 석탄가스화에 의해 생성된 고온의 석탄가스의 열손실을 최소화하여 열효율이 높은 기술이다. 본 연구에서는 석탄으로부터 합성원유를 생산하는 0.3 배럴/일 규모 석탄액화(CTL)공정의 연계운전을 통하여 건식탈황공정의 성능을 평가하였다. 0.3 배럴/일 규모 석탄액화공정은 석탄가스화기, 건식탈황공정, 액화공정으로 구성되어 있으며 30 atm의 고압에서 운전된다. 건식탈황공정은 석탄가스화기와 액화공정 사이에 위치하여 석탄가스화로부터 생성된 석탄가스에 함유된 황화합물을 아연계 건식탈황제에 의해 제거한 후 액화반응기로 공급하여 황화합물에 의한 촉매의 피독을 막아주는 역할을 수행한다. 본 연구에서는 기존에 개발된 두 개의 기포유동층 반응기로 구성된 탈황장치를 30 atm에서 운전이 가능하도록 수정/보완하여 실제 운전압력인 30 atm의 고압에서 연속운전을 수행하였다. 실험 결과 탈황효율은 99% 이상이며 탈황반응기 출구 황화합물의 농도는 1 ppmv 이하로 유지하였다.
Pulse electrokinetic technology is proposed for improving the dewatering-process from clay-sandy soil. Proposed electrokinetic technology is to be the dewatering process due to fluid movement of current flow for the stability of clay-sandy soils. Samples produced in this study were completed to verify the proposed performance for 7 days by gradually increasing the pressure to the final pressure of 30 psi ($2.11kgf/cm^2$) through the compression process. In this study, pulse electrokinetic treatment and conventional continuous electrokinetic treatment are tested and observed, respectively. The condition of continuous electrokinetic treatment is a continuous process during 48 hours. And the condition of pulse electrokinetic treatment system is to interrupt the power three times for 48 hours, every 8 hours. These treatments are that the voltage gradient is 3 V/cm. As a result, the efficiency of pulse electrokinetic is similar to the continuous electrokinetic. The power consumption efficiency of pulse electrokinetic is better than continuous electrokinetic.
We prepared monodispersed spherical silica microgels by controlling various conditions of emulsification procedure using a lab-scale membrane emulsification system equipped with SPG (Shirasu porous glass) porous membrane having pore size of $1.5{\mu}m$. We determined the effects of process parameters of membrane emulsification (ratio of dispersed phase to continuous phase, sodium silicate concentration, emulsifier concentration, dispersed phase pressure, stirring speed) on the mean size and size distribution of silica microgels. The increase of the ratio of dispersed phase to continuous phase, dispersed phase pressure and sodium silicate concentration led to the increase in the mean size of microgels. On the contrary, the increase in emulsifier concentration and stirring speed of the continuous phase caused the reduction of the mean size of microgels. Through controlling these parameters, monodisperse spherical silica microgels with about $6{\mu}m$ of the mean size were finally prepared.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.