• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.5 no.2
• /
• pp.15-18
• /
• 2014

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.18-23
• /
• 2015

• The monthly packaging world
• /
• s.276
• /
• pp.102-107
• /
• 2016

환경부는 제품의 포장재질 포장방법에 관한 기준 등에 관한 규칙을 제정, 공포했다. 공포된 법안은 종이 등 합성수지재질이 아닌 포장재의 사용이 활성화된 계란 및 면류(麵類)를 합성수지재질로 된 포장재 연차별 줄이기 대상에서 제외하는 등의 내용으로 "자원의 절약과 재활 용촉진에 관한 법률 시행령"이 개정됨에 따라, 계란 및 면류에 대한 합성수지재질로 된 포장재 연차별 줄이기 기준을 삭제하는 한편, 포장폐기물의 발생을 억제하기 위하여 제조자 등은 환경친화적인 제품 포장에 대하여 자율적으로 평가하는 시스템을 구축할 수 있도록 하고, 1차 포장에 공기를 주입한 음식료품류의 포장공간비율을 연성포장의 경우 35퍼센트, 캔 포장 제품의 경우 20퍼센트로 명확히 하려는데 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.4
• /
• pp.21-31
• /
• 1993

불규칙한 기하구조 및 기하학적 특이점들을 갖는 방사체에 의해 형성되는 음장을 예측하는 작업은 매우 어려운 일이다. 이러한 종류의 문제를 해결하기 위하여는 Seybert에 의해 제창된 내, 외부를 연성하여 해석하는 경계요소법에 의한 해석이 유용하다고 여겨지고 있다. 본 연구에서는 연성경계요소법을 재 구성하여 예제로서 얇은 벽면을 갖는 개방된 관에서 방사되는 음장을 선택한 후, 이 방법의 신뢰성, 적용성 및 오차에 대한 해석을 해?ㄴ다. 외부 방사 문제에 있어서의 비유일성문제는 소외 CHIEF 기법을 도입하여 해결하였다. 두 개의 마이크로폰을 사용하여 신호처리를 통한 실험 결과와 본 경계요소법에 의한 결과는 서로 잘 일치하였다. 한편 경계면에 몹시 가까운 지점에서의 음장을 예측할 때의 오차 해석을 수행한 결과, 예측 오차가 10% 이내에서 유지되려면 경계요소법의 가장 짧은 변의 길이가 예측점과 벽면 사이의 거리보다 최소한 10배 이상은 커야함을 알아내었다. 이 기법은 기하학적인 특이점을 포함하는 각종 음향 문제에 매우 유효 적절한 방법으로 생각된다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.667-675
• /
• 2004

This paper presents the failure mode and strengthening design of reinforced concrete slab strengthened with Carbon Fiber Reinforced Polymer(CFRP) grid. Parameters involved in this experimental study are FRP grid reinforcement quantity, repair mortar thickness, the presence of anchor, and strengthening in compression. In this study, there are different failure types with increasing the CFRP grid strengthening reinforcement. On the low strengthening level, CFRP grid in repair mortar cover ruptures. On the moderate strengthening level, there is a debonding shear failure in the interface of carbon FRP grid because of the excessive shear deformation. On the high strengthening level, diagonal shear failure occurs. With the increasing of FRP grid reinforcement, the strengthening effect increased, but the ductility decreased. By limiting the strengthening level, it can be achieved to prevent shear failure which result in sudden loss in the resisting load capacity. CFRP rupture failure is desirable, because CFRP ruptured concrete slab keeps the same load capacity and ductility haying before strengthening even after failure. Finally, design guideline and procedure are given for strengthening of concrete slab with CFRP grid.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.75-82
• /
• 1987

It is the objective of this study to estimate J-integral by numerical analysis, in which J-integral as aparameters in fracture mechanics can be used to evaluate unstable ductile fracture which is a important problem with respect to structural stability when the scope is beyond small scale yielding criteria. For this, 8-node isoparametric singular element as crack tip element of a cracked material was used to solve plastic blunting phenomenon at crack tip, and crack opening was forced to start when J-value was exceeding fracture toughness $J_{IC}$ of the material. And crack propagation behaviour was treated by using crack opening angle. From this study, it was shown that crack opening, stable propagation and unstable opening point of the cracked material found by using J-value obtained from this study were accord with the other study, so think, J-value obtained from this study can be directly used as a parameter in fracture mechanics to deal with the problem of stable propagation of crack and unstable ductile fracture.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.81-85
• /
• 2017

Fiber-reinforced polymer composites, which are made by combining a continuous fiber that acts as reinforcement and a homogeneous polymeric material that acts as a host, are engineering materials with high strength and stiffness and a lightweight structure. In this study, a shape memory alloy(SMA) reinforced composite actuator is presented. This actuator is used to generate large deformations in single lightweight structures and can be used in applications requiring a high degree of adaptability to various external conditions. The proposed actuator consists of numerous individual laminas of the glass-fiber fabric that are embedded in a polymeric matrix. To characterize its deformation behavior, the composition of the actuator was changed by changing the matrix material and the number of the glass-fiber fabric layers. In addition, current of various magnitudes were applied to each actuator to study the effect of the heating of SMA wires on applying current.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.12-19
• /
• 2021

Recently, with frequent earthquakes around the world, research on seismic design and seismic reinforcement of reinforced concrete facilities has been actively conducted from earthquakes. In particular, columns, which are compressed members of reinforced concrete structures, are vulnerable to lateral forces caused by earthquakes, so an appropriate seismic reinforcement method is required. Therefore, this study intended to develop Velcro seismic reinforcement method that is quick and easy to construct. For the development of Velcro seismic reinforcement, the adhesion and tensile strength of the existing industrial velcro was improved. A direct tensile test was also conducted to compare the tensile performance of the newly-developed velcro seismic reinforcement to industrial one. In addition, numerical analysis was performed to predict the seismic performance of RC columns reinforced by industrial and newly-developed velcro. Based on the analysis results, the strength and ductility of the non-seismic and velcro-reinforced RC column were reviewed. The analysis confirmed that both the strength and ductility of non-seismic RC columns reinforced by industrial and newly-developed velcro increased, but the seismic performance of the newly-developed Velcro reinforcement is better than that of industrial velcro.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.169-169
• /
• 2010

박막형 CIGS 태양전지의 배면전극으로 사용되는 Mo 박막은 낮은 저항으로 인한 전기전도성과 열적 안전성이 아주 우수하다. 연구에서는 연성 CIGS 태양전지의 제조를 위한 Mo 배면전극의 대면적 증착기술에 관한 것으로 DC Magnetron Sputtering 공정을 이용하여 전주기술을 통한 Ni-Fe계 연성기판재 위에 졸걸법으로 합성된 $SiO_2$ 절연박막에 Mo 박막을 증착하는 것을 목적으로 하고 있다. 실험에서는 연성기판재 대신 시편을 Sodalime glass, Si wafer, SUS계 소재를 사용하여 스퍼터링 공정에 의한 Mo 박막을 증착하였다. 실험에서 타겟에 인가되는 전력과 공정압력을 변수로 하여 Mo 박막의 증착율, 전기저항성을 측정하였다. 타겟의 크기는 $80mm{\times}350mm$, 타겟과 기판간 거리 20cm 이었으며, 공정 압력은 2~50 mtorr 영역에서 인가전력을 0.5-1.5kW로 하였다. Mo 박막의 증착율과 전기적 특성을 측정하기 위하여 $\alpha$-step과 4-point probe(CMT-SR 1000N)를 이용하였다. 그리고 Mo 박막의 잔류응력을 측정하기 위하여 잔류응력측정기를 이용하였다. Mo 박막의 미세구조분석을 위하여 SEM 및 XRD를 분석을 실시하였다. 배면전극으로서 전기저항성은 공정압력에 따라 좌우 되었으며, 2 mTorr 공정압력과 1.5kW의 전력에서 최소값인 $8.2\;{\mu}{\Omega}-cm$의 저항값과 증착율 약 $6\;{\mu}/h$를 보였다. 기판재와의 밀착성과 관련한 잔류응력 측정과 XRD분석을 통한 결정립 크기를 분석하여 공정압력에 따른 Mo 박막의 잔류응력과 전기 저항 및 결정립 크기의 상관관계를 조사하였다. 그리고 대면적 CIGS 증착공정을 위해 직각형 타겟을 통해 증착된 Mo 박막의 증착분포를 20cm 이내 조사하였다.

• Informatization Policy
• /
• v.19 no.3
• /
• pp.19-35
• /
• 2012

As Internet users increasingly consume news through the Internet, Internet portals face criticism that they are quickening the softening of public news and molding public opinions. Some portals have started to provide newscast services that directly connect the press, not grouping news sources on their own standards. This study aims to clarify how news grouping models and newscast models are different in terms of news softening and agenda setting. Specifically, authors conduct a content analysis on time-specific news content provided by top three portals-Naver, Daum, and Nate. By doing so, this study examines characteristics of news service models of Internet portals and their social and political implications. According to our study, the softening and tabloidization of portal news had not been improved even after adopting the newscast model. Therefore, portal journalism should be reorganized as a way to circulate healthy and qualified news content.