Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Lateral Strength and Ductility of Velcro Reinforced RC Columns with Finite Element Analysis

유한요소해석을 통한 벨크로로 보강된 RC 기둥의 횡방향 강도 및 연성 능력 평가

  • 김상우 (경상국립대학교 토목공학과) ;
  • 김경민 (경상국립대학교 토목공학과) ;
  • 김건우 (경상국립대학교 토목공학과) ;
  • 이수영 (경상국립대학교 토목공학과) ;
  • 김진섭 (경상국립대학교 토목공학과)
  • Received : 2021.03.31
  • Accepted : 2021.08.17
  • Published : 2021.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, with frequent earthquakes around the world, research on seismic design and seismic reinforcement of reinforced concrete facilities has been actively conducted from earthquakes. In particular, columns, which are compressed members of reinforced concrete structures, are vulnerable to lateral forces caused by earthquakes, so an appropriate seismic reinforcement method is required. Therefore, this study intended to develop Velcro seismic reinforcement method that is quick and easy to construct. For the development of Velcro seismic reinforcement, the adhesion and tensile strength of the existing industrial velcro was improved. A direct tensile test was also conducted to compare the tensile performance of the newly-developed velcro seismic reinforcement to industrial one. In addition, numerical analysis was performed to predict the seismic performance of RC columns reinforced by industrial and newly-developed velcro. Based on the analysis results, the strength and ductility of the non-seismic and velcro-reinforced RC column were reviewed. The analysis confirmed that both the strength and ductility of non-seismic RC columns reinforced by industrial and newly-developed velcro increased, but the seismic performance of the newly-developed Velcro reinforcement is better than that of industrial velcro.

최근 전 세계적으로 지진이 빈번하게 발생하면서 지진으로부터 철근콘크리트 시설물의 내진설계 및 내진보강에 대한 연구가 활발히 진행되고 있다. 특히 철근콘크리트 구조물의 압축부재인 기둥은 지진에 의한 횡력에 취약하여, 적절한 내진보강공법이 필요하다. 따라서 본 연구에서는 시공이 빠르고 간편한 벨크로 내진보강재를 개발하고자 하였다. 벨크로 내진보강재 개발을 위해 기존 공업용 벨크로의 부착성능과 인장력을 증가시켰으며, 공업용 벨크로와 개발된 벨크로 내진보강재의 인장성능을 비교하기 위해 직접인장실험을 수행하였다. 또한 공업용 벨크로와 벨크로 보강재로 보강된 RC 기둥의 내진성능을 예측하기 위한 해석연구를 수행하였다. 해석결과를 바탕으로 비내진 RC 기둥의 벨크로 보강재의 보강에 따른 강도와 연성능력에 대하여 검토하였다. 해석결과 공업용 벨크로와 벨크로 보강재로 보강된 비내진 RC기둥의 강도와 연성능력이 모두 증가함을 확인하였으며, 개발된 벨크로 내진보강재의 내진 성능이 공업용 벨크로 보다 크게 나타남을 확인하였다.

Keywords

Acknowledgement

본 연구는 국토교통부/국토교통과학기술진흥원의 지원으로 수행되었음(과제번호21CTAP-C157156-02).

References

  1. ABAQUS (2018), Dassault System Simulia Corp., Analysis User's Manual. Version 6.14.
  2. ACI Committee 437, Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance Criteria (ACI 437.1R-07).
  3. Chang, J., Kwon, M., Kim, J., and Joo, C. (2012), NumericalStudy for Seismic Strengthening of RC columns Using Fiber Reinforced Plastic Composite, The Korea Institute for Structural Maintenance and Inspection, https://doi.org/10.11112/jksmi.2012.16.3.117
  4. Hur, M. W., Chun, Y. S., Hwang, J. S., and Kim, J. H. (2015), Seismic Capacity of Non-seismic Designed RC Framed Building Retrofitted by Double I-type Metallic Damper, The Korea Institute for Structural Maintenance and Inspection, 19(6), 010-017, https://doi.org/10.11112/jksmi.2015.19.6.010
  5. Jeong, D. S., Kim, G. M., Kim, B. W., Kim, W. S., and Kwak, Y. K. (2020), Study of the Mechanical Properties of Fiber Reinforced Concrete According to Inorganic Fiber Combination, Journal of the Korean Society for Advanced Composite Structures, 11(3), 16-24, https://doi.org/10.11004/kosacs.2020.11.3.016
  6. Jung, J. S., and Lee, K. S. (2018), A Seismic Capacity of R/C Building Damaged by the 2016 Gyeongju Earthquake Based on the Non- linear Dynamic Analysis, The Korea Institute for Structural Maintenance and Inspection, 22(1), 137-146, https://doi.org/10.11112/jksmi.2018.22.1.137
  7. Jung, H. C., Jung, J. S., and Lee, K. S. (2019), Seismic Performance Evaluation of Internal Steel Frame Connection Method for Seismic Strengthening, Journal of the Korea Concrete Institute, 31(1), 79-88, https://doi.org/10.4334/JKCI.2019.31.1.079
  8. Kim, J. S., Kwon, M. H., Seo, H. S., Lim, J. H., and Kim, D. Y. (2013a), Analytical Study for Optimal Reinforcement Amount and Development of FRP Seismic Reinforcement that can be Emergency Construction, The Korea Institute for Structural Maintenance and Inspection, 17(5), 136-145, https://doi.org/10.11112/jksmi.2013.17.5.1
  9. Kim, J. S., Kwon, M. H., Jung, W. Y., and Limkatanyu, S. (2013b), Seismic performance evaluation of RC columns reinforced by GFRP composite sheets with clip connectors, Constructinand Building Materials, 43, 563-574. https://doi.org/10.1016/j.conbuildmat.2013.02.023
  10. Kim, S. K., Park, J. K., Han, S. H., Kim, B. C., and Jang, I. Y. (2014a), Study on Reinforcement Effect of Circular RC Columns by Helical Bar Under Cyclic Lateral Load, The Korea Institute for Structural Maintenance and Inspection, 18(1), 048-058, https://doi.org/10.11112/jksmi.2014.18.1.048
  11. Kim, J. S., Seo, H. S., Lim, J. H., and Kwon, M. H. (2014b), An Performance Evaluation of Seismic Retrofitted Column Using FRP Composite Reinforcement for Rapid Retrofitting, Journal of the Korea Concrete Institute, 26(1), 47~55, http://dx.doi.org/10.4334/JKCI.2014.26.1.047
  12. Kwon, M. H., Seo, H. S., and Kim, J. S. (2016), Seismic Performance of RC-Column Wrapped with Velcro, Structural Engineering and Mechanics, 58(2), 379-395. https://doi.org/10.12989/sem.2016.58.2.379
  13. Kown, M. H., Shing, P. B., Mallare, C., and Restrepo, J. (2011), Seismic Resistance of RC Bent Caps in Elevated Mass Transit Structures, Earthquake Spectra, 27(1), 67-88, https://doi.org/10.1193/1.3533471
  14. Lee, J., and Fenves, G. L. (1998), Plastic-Damage Model For Cyclic Loading of Concrete Structure, Journal of Engineering Mechanics, ASCE, 124(8), 892-900. https://doi.org/10.1016/j.proeng.2011.07.057
  15. Lee, P. S., and Noh, H. C. (2007), On the Finite Element Analysis of Shell Structures, Korean Society of Civil Engineers, 27(3A), 277-289.
  16. Lee, D. J., Kim S. W., Kim K. M., and Kim J. S. (2020a) Compressive Behavior of Concrete Specimen Reinforced by Velcro, Journal of the Korean Society for Advanced Composite Structures, 11(5), 15-21, https://doi.org/10.11004/kosacs.2020.11.5.015
  17. Lee, H., Cho, J., Lee, S. G., Lee, S. H., and Hong, K. J. (2020b), Effect of BFRP Wrapping on Seismic Behavior of Rectangular RC Columns, Journal of the Korea Institute for Structural Maintenance and Inspection, 24(6), 153-160, https://doi.org/10.11112/jksmi.2020.24.6.153
  18. Lubliner, J., Oliver, J., Oller, S., and Onate, E. (1989), A Plasticdamage Model for Concrete, International Journal of Solids and Structures, 25(3), 1989, 299-326, https://doi.org/10.1016/0020-7683(89)90050-4
  19. Hong, G. H. (2008), Construction Method Improvement of the FRP-plate Strengthening Method using the Velcro, The Korea Institute for Structural Maintenance and Inspection, 12(6), 225-232.