• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2016

A fuel supply system of heavy-duty CNG engine is composed as a module structure which is integrated by about 6 injectors. There are only one input and output passage for gas fuel supply in this injector module. The response performance for transient operation of an CNG engine is very poor because only one output fuel supply line is connected to the intake pipe after a throttle valve. In this study, a new guideline and internal flow design for the CNG injector module is suggested for the improvement of response performance by fluid dynamic simulations. As a result, the response performance of gas fuel supply can be improved by decreasing the total volume of internal flow passages and a same distance design from each injector to the exit of module shows good response performance and acquirement of linearity of fuel supply. But the injection order has little influence to injection performances.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.399-404
• /
• 2015

The cost of fuel in ships has recently increased due to a rapid increase in international oil prices and international restrictions regarding the greenhouse effect generated from the burning of fuel. Therefore, different methods for changing the hull designs for improving energy efficiency, developing coating for reducing friction resistances, developing additives for improving engine thermal efficiency, and low-speed operation for reducing fuel consumption have been considered. The developments of high-speed, large-scale, and energy-saving vessels are deemed essential to adapt to the recent high oil price era. Therefore, it is important to analyze Precisely the qualitative and quantitative changes in the resistance value of the local areas of the hull surface. In this study, the engine performance before and after docking was analyzed to examine friction resistance caused by marine growth on the hull as a basic study for improving the energy efficiency. The result was then presented by comparing it with the previous data for 2.5 years between docks to investigate the performance of the main engine, the change in friction resistances and loads, the fuel consumption and ship speed.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.52-57
• /
• 2011

Present paper reports a new method to separate the electrolyte membranes and carbon paper without using ultrasonic waves and stirring. In this method, these were separated from fuel cell membrane-electrode assembly(MEA) using the distilled water, butanol and surfactant by dipping method without the dispersion of catalyst particles. Separated carbon paper catalysts and fuel cell Pt/C catalysts were heated in aqua regia at $80{\sim}85^{\circ}C$ and added to precipitant. After calcination, Pt metal was recovered which might be used in fabricating new fuel cells.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.649-657
• /
• 2023

ICAO adopted the Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) at the 39th General Assembly in 2016, and 115 countries, including South Korea, expressed their intention to participate in CORSIA as of January 1, 2023. Since carbon generated in the aviation industry is mainly caused by greenhouse gases emitted from aircraft engines, fuel consumption must be reduced to reduce carbon emissions. Prior research, such as simulation, is essential to predict the effectiveness of each plan and to make decisions about its implementation. High-quality data is needed to derive accurate results, but it has been difficult to secure actual fuel consumption data, as they are considered to be classified airline data. Therefore, in this paper, after establishing a model that estimates fuel consumption based on actual fuel consumption data, the model is to be advanced to improve its accuracy.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.1
• /
• pp.18-23
• /
• 1985

내연기관은 자동차용 기관에 의하여 일반대중과 접촉하게 되었으며, 특히 20세기 중반에 이르러 자동차라는 기계가 일반가정에서 사용되는 가구로 탈피하는 과정에서 그 중요장치의 하나인 자동차용 기관도 전문가가 취급하는 기계로부터 일반인이 취급하는 가구로의 탈피를 요구함에 따라 크게 발전해 온 것이 사실이다. 종래, 내연기관의 설계에 있어서 그 출력과 연료소비를 가장 중요한 성능평가의 요소로 삼아왔지만, 가구로서의 자동차의 최적화를 위해서는 더욱 중요한 많은 성능평가의 요소가 있다는 것을 인식할 필요가 있다고 생각한다. 실은 최적화에 필요한 많은 요소의 균형을 어떻게 할 것인가 하는 것이 자동차용 기관의 설계에 있어서 가장 중요한 일이라 생각되며, 자동차용 기관을 계획할 때의 목표는 다음과 같은 3가지로 생각된다. (1) 고성능일 것 (2) 우수한 기능을 가질 것 (3) 공해가 없을 것 (1)의 고성능을 추구하는데 있어서는 비출력, 연료소비율 및 양호한 응답성이 중요한 요소로 된다. 이중 응답성의 문제는 연료공급기구나 조속기 등의 기능적인 요소와 깊은 관련이 있다. 그리고 내구성, 신뢰성, 정비점검의 무용성이라는 것이 (2)의 우수한 기능을 보장하기 위한 가장 중요한 배경으로 된다. 또한 진동이나 소음이 없고 정숙할 것이 (3)의 무공해성의 목표와도 관 련되는 중요한 요소이다. 배출가스의 무공해화가 자동차에 의한 공해방지의 입장으로부터 중요한 요소가 되는 것은 주지의 사실이다. 그리고 이 배출가스의 청정화의 문제는 성능향상을 위한 비출력증대의 방향에 대한 방해가 되는 문제이다. 이상 기술한 바와 같은 설계단계에 있어서의 계획목표를 3가지로 설정하고, 이 3가지 목표에 관련되는 요소의 균형을 어떻게 위해야 할 것인가 하는 점에 초점을 맞추어 되도록 쉽게 기술하고자 하였으나, 미비한 점이 많았을 것으로 생각하여, 다만 이 분야에 종사하는 기술자 여러분에게 약간의 도움이라도 되었으면 하는 것이 소망이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.113.1-113.1
• /
• 2010

본 연구에서는 중 소형 SOFC에 적용할 수 있는 연료 변환 시스템으로 자체 기동 및 독립운전이 가능한 천연가스 자열개질(ATR) 반응기를 $10Nm^3/hr$급으로 개발하고자한다. 설계된 천연가스 자열개질기는 자열개질 촉매를 코팅한 금속 모노리스형 촉매체를 반응기 내에 장착함으로써 반응열을 신속하게 제거 또는 공급할 수 있는 시스템으로 구성되었다. 이는 금속 모노리스의 뛰어난 열전도 능력에 의해 반응기 내의 촉매층 전체 온도 분포를 균일하게 유지할 수 있는 저에너지형 자열개질 반응기이다. 또한 빠른 기동 특성을 실현하기 위하여 전기 발열식 촉매체(EHC ; Electically Heated Catalyst)를 장착한 start-up 시스템을 적용하여 천연가스 자열개질 반응기의 신속한 기동과 장치 간편화를 실현하였으며, 합성 syngas의 배열 회수를 위한 최적 열교환 시스템을 설계/적용함으로써 에너지 효율 향상을 도모하였다. 이와 같은 촉매 및 구조 시스템을 가지는 천연가스 자열개질 반응용 소형 연료변환 시스템을 원통형의 이중관 구조로 구성하고, 독립운전 모드로 개발함으로써 소형 SOFC의 연료 변환장치의 적용에 용이하게 하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.277-280
• /
• 2009

Mechanism of combustion frequencies occurring during combustion is experimentally investigated in model combustor with V-gutter flameholder. this combustor has a long duct shape with a cross section area of $40{\times}40\;mm$. The v-gutter type flameholder with 14mm width is mounted at the bottom of combustor. Kerosene and methane were used as fuel, and these fuel were injected transversely into air crossflow. It is found that combustion frequencies were considered as 1L longitudinal mode caused by combustor geometry and vortex shedding mode of flameholder. And fuel phase effect and nozzle effect were also observed in the low frequency range.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.49-62
• /
• 1993

It has been a principle research topic on the diesel engine development to increase the efficiency and the performance of engine to satisfy the user's needs for high reliability and durability. However, recently with the worldwide concerns at the global climate change and environmental protection, the main target in the diesel engine research has been changed to solve the exhaust emission problem in order to satisfy the strict emission regulations. To reduce the pollutant for the diesel engine, the researchs on the combustion chamber is the most important and has to be performed first of all. The diesel fuel injection system plays major role to air-fuel mixing process and influences engine output, themal efficiency, reliability, noise, and emissions. The experimental studies were conducted by varying the various parametric conditions and the results were campared with the computation and calculated results by using the fuel injection simulation program developed during previous research. From the experiments, the matching technique of a fuel injection pump and nozzle was conducted to understand under the various parametric conditions. Also, the relations between needle lift and wave propagation characteristics in high pressure pipe were examined. The basic design data from the experimentations and computation works would be applied to actual design works of diesel fuel injection system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.248-252
• /
• 2007

This article is related to the possibility for continuous operation of a liquid rocket engine when a portion of cryogenic propellant in the pipeline is vaporized. As a result of experimental studies imitating the formation of vapors in the flow, we confirmed the possibility of full gas-phase condensation in case temperature of cryogenic liquid is lower than it's saturation temperature in the pipeline. Empirical equation allowing to calculate a nonequilibrium condensation region in the steady flow of cryogenic liquid was obtained as a non-dimensional form and the fields of practical application were suggested.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.386-394
• /
• 1987

The method of methanol using in diesel engines hasn't been established yet because of it's low ignition characters. But many studies about it with many methods have been doing recently. If alcohol can be used in diesel engines, smoke and NO$\sub$x/, which is a big problem in diesel engines, can be reduced large. The purpose of this study is to establish using method of alcohol, as a substitute fuel. In this study, Combustion characters, engine performance and exhaust gas emissions are checked by using gasfication diesel method. Concluding remarks of this study are as follows. (1) Methanol can be used within 30% of total inducing energy, if above that rate, it can't be used because of knocking and bad operating condition. (2) Under the low load, the effect of methanol inducing of fuel consumption is somewhat bad, but under the high load, the effect is very good. (3) Under the high load, smoke limit is a marked improvement with methanol inducing.