• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.280-292
• /
• 2014

A tram has been the focus of a new public transportation that can solve a traffic jam, decreasing of public transit usage and environmental problem in recent years. This study aims to develop a signal optimization model for considering the traffic signal progression of tram and vehicles, when they are operated simultaneously in the same signalized intersections. This research developed the KS-SIGNAL-Tram model to obtain a minimum tram bandwidth and to minimize a vehicle's delay to perform a tram passive signal priority, it is based on the KS-SIGNAL model and is added to the properties of a tram and it's system. We conducted a micro simulation test to evaluate the KS-SIGNAL-Tram model, it showed that the developed optimization model is effective to prevent a tram's stop on intersection, to reduce a tram's travel time and vehicle's delay.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.180-180
• /
• 2012

ADCP는 3차원 유속과 수심을 관측하여 유량을 정확하게 계산하는 데 널리 이용되고 있는 최신계측기기로 국내에서도 유량조사사업단 등 기관에 도입되어 수위-유량관계곡선식의 보정 등에 적용되고 있다. 하지만 ADCP 관측값 중 수심관측 자료를 별도로 활용하는 부분도 많은 관심을 받고 있다. 특히 최근 4대강 사업으로 인한 하상변동 측정에 기존 유량관측용으로 구매된 ADCP를 수심관측용으로 활용할 수 있다. ADCP는 일정한 각도로 경사진 4개의 초음파 빔을 활용하여 사선 방향으로 수심을 각각 관측한다. 최근에는 별도의 수심관측용의 수직 빔을 추가 설치하여 한번 관측에 초당 5개 지점의 수심을 동시에 관측할 수 있어 수심관측용으로도 기존 단독빔 음향측심기에 비해 효율적으로 수심을 관측할 수 있다. 그리고 ADCP는 GPS와 연동되어 수심관측의 3차원 공간정보 (x, y, z)를 창출할 수 있어 기존 GIS 자료와 융합될 수 있다. 하지만 기존의 음향 측심기의 수직빔과 다르게 ADCP의 빔이 일정한 각도로 경사져 있고 선박 활용 관측 시 요동에 의해 흔들려 각각의 빔이 계측한 수심의 수평위치를 정확하게 추출하기 어려운 점이 있다. 특히 경사빔에 의한 수심관측지점에 GPS 정보를 추정하여 부여하는 작업도 까다롭다고 하겠다. 그리고 수심관측자료 자체의 오차나 특이점 제거 등의 보정작업을 거쳐야 하는 문제도 있다. 따라서 원자료를 직접 활용할 수 없고 별도의 후처리 과정을 거쳐야 한다. 따라서 본 연구는 이러한 문제를 해결하기 위해 다음의 알고리즘을 개발하였다: 1) 경사빔에 의한 관측지점의 수평위치 산정, 2) ADCP의 흔들림 (피치와 롤링) 보정, 3) 경사빔의 관측위치에 지리정보부여, 4) 수심관측치 오차와 특이점 보정, 5) 관측자료의 GIS 파일 전환. 이러한 알고리즘은 GUI와 연동되어 적용되었으며 편리하게 이용되도록 구성되었다. 그리고 본 연구는 이러한 ADCP의 수심관측 자료와 하천 및 저수지 등 경계 GIS 파일을 연동시켜 전체 혹은 국부 저수량과 하상변동량을 계상하는 알고리즘도 추가하여 관측자료의 실무에서의 활용성을 증대시키고자 하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.27-35
• /
• 2005

While the current world wide network offers an incredibly rich base of information, it causes network management problem because users should have many independent IDs and passwords for accessing different sewers located in many places. In order to solve this problem users have employed single circle of trust(COT) ID management system, but it is still not sufficient for clearing the problem because the coming ubiquitous network computing environment will be integrated and complex networks combined with wired and wireless network devices. The purpose of this paper is to describe the employment and evaluation of federated ID interoperability method for solving the problem. The use of the proposed model can be a solution for solving network management problem in the age of mobile computing environment as well as wired network computing environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.22-26
• /
• 2012

This paper introduces a 2.5-Gb/s optical receiver implemented in a standard 1P4M 0.18um CMOS technology for the applications of active optical HDMI cables. The optical receiver consists of a differential transimpedance amplifier(TIA), a five-stage differential limiting amplifier(LA), and an output buffer. The TIA exploits the inverter input configuration with a resistive feedback for low noise and power consumption. It is cascaded by an additional differential amplifier and a DC-balanced buffer to facilitate the following LA design. The LA consists of five gain cells, an output buffer, and an offset cancellation circuit. The proposed optical receiver demonstrates $91dB{\Omega}$ transimpedance gain, 1.55 GHz bandwidth even with the large photodiode capacitance of 320 fF, 16 pA/sqrt(Hz) average noise current spectral density within the bandwidth (corresponding to the optical sensitivity of -21.6 dBm for $10^{-12}$ BER), and 40 mW power dissipation from a single 1.8-V supply. Test chips occupy the area of $1.35{\times}2.46mm^2$ including pads. The optically measured eye-diagrams confirms wide and clear eye-openings for 2.5-Gb/s operations.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.396-404
• /
• 2007

In this paper, an Ad-hoc Routing Protocol which works in wireless Ad-hoc communication networks with multiple radios and multiple channels, and controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which makes full duplex transmission between wireless Ad-hoc nodes, and reduces the intra interference on a route. Also, a fixed channel only for reception at each node enables the measurement of the available bandwidth, which is used to control the call admission for QoS provision. The performance of MCQosR is verified by simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.50-57
• /
• 2004

Two processors are generally used to drive the power circuits for controlling the dual motors independently. In this paper, we propose the new control scheme to drive dual inverters using only one controller with the aid of CAN network. The proposed system is very useful compared to conventional techniques especially in case of controlling the combined dual motors because the control algorithm can be implemented by the software program only without any additional processor or hardware interfacing. The proposed system is implemented and verified experimentally.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6427-6433
• /
• 2013

For trains to run safely and quickly, the train should always follow the preceding train at a proper spacing. For this purpose, a certain distance between the stations is set for each block section. For the safe operation of trains in one block section, only one train service for an automatic block system is needed. The existing block system is composed an ABS, which is a linked track circuit and line sideway system through the interlocking system. The interlocking system is being replaced with a domestic electronic interlocking system. On the other hand, the block system still uses the relay format of an analog system, and is independently installed of the line sideway systems. Therefore, the existing block system has many problems in terms of construction and maintenance. In addition, the existing domestic line is used for ABS and LEU , which is installed separately, despite the train being controlled by the information of the same signal at the same location. This is not efficient in terms of each product price and the maintenance costs. This paper introduces an integrated electronic block system and the field test results. The field test was carried out through a periodic inspection performed eight times from January to late August.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.9-15
• /
• 2016

In this paper, we propose a smart HLS(HTTP Live Stream) platform with dynamic single buffering for the best transmission of adaptive video bit-rates. This smart HLS can optimizes the channel transition zapping-time with the monitoring of bandwidth between HLS server and OTT(Over The Top) client. This platform is designed through the control of video stream due to proper multi-bitrates and bandwidths. This proposed OTT can decode the live and VOD(Video On Demand) videos with the buffering of optimumal bitrate. And, the HLS can be cooperated with a smart OTT, and segmented for the m3u8 files of H.265 MPEG-2 TS(Transport Stream) videos. As a resullt, this single buffer based smart OTT can transmit optimal videos with the maximum data buffering according to the adaptive bit-rate depending on the network bandwidth efficiency and the decoded VOD video, too.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.5
• /
• pp.3-16
• /
• 2001

With the development of Internet, it is widely spreaded to a Intranet based on Internet technology. Intranet is a private, unique network to share the information of organization such as incorporate, research institute and university. With the increase of Intranet using, Intranet environment is developing into Extranet environment which is connected many Intranet. Currently such Intranet and Extranet environments, above all, it is important to solve security problems which can appear through use of information between domains. Thus, in this paper, we propose SSO(Single Sign-on System) model with authorization management and single sign-on operation, and we extend it to enable mutual authentication through inter-working based on PKI(Public Key Infrastructure) in Extranet environments.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.