• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.63-74
• /
• 2006

It's essential to meet the expectations of drivers through reasonable road design, which makes the drivers to recognize the conditions of road sufficiently. In this case, we could say that because the roads are consistently designed, drivers can make a safe and comfortable drive. There are so many studies about the alignment design consistency methods which are previously mentioned. In this study, Firstly we categorize the studies which are concerned with the estimation of the alignment design consistency methods and then apply the method which fits for the actual condition into the practice. And we'll make a realistic method by using the data which aye collected from the National Road. The developed model in this study is the predicting model including speed($V_t$) as the variable on the upper stream 100m of the curve. This model was developed which divided to two cases in the all directions of two lanes; One case is the $R{\leq}200m$ and another case is the R>200m. In the section of the $R{\leq}200m$, this case was influenced on the road alignment(R) and($V_t$) and another section was found that is affected to the speed($V_t$) on the upper stream loom rather than the effect of road alignment(R). In the case of all directions of four lanes, however, this study is predicted divided to two sections on the 400m of R, these section have more influenced to($V_t$) than the road alignment factors. This result of the four lanes was represented to different result with the two lanes. This study will further need development of the predicting model with the higher confidence through collecting data with more the exact data, the various road alignment data and speed of the several sections on the upper stream on the curve.

• Korean Security Journal
• /
• no.18
• /
• pp.73-99
• /
• 2009

There are three assassination and treatening cases in this thesis introduced as analysis data. They are shooting accidents of the U.S.A's President Reagun (1981,3.30), and the President Park Jeong Hee of South Korea(1974.8.15), assassination of the Prime Minister Lavin of Israel (1995.11.4) In March 30, 1981, there was an accident where criminal, Hinckley, fired ball cartridges right before the President Reagan got into the car to move to White House after completing the announcement of Hilton Hotel of Washington. As a result, the chest of president was shot and public information secretary and safeguard were wounded. In August, 15, pm 10:23, where the 29th 8.15 independent anniversay event was being celebrated by the people at the National theater in Jangchungdong, Seoul, the criminal Moon Sekwang fired ball cartridges, he failed to assassinate the President Park Jeong Hee of Korea, but shot the First lady Yuk Young Soo. She was wounded right part of head and died. In November 4, Saturday, pm 22:00 the Prime Minster Lavin had finished the supporting event of Middle Asia's Peace project and was taking on the car when he was killed by the criminal Amir's shooting, The accidents left very important lesson from the aspect of security analysis and it has been frequently used as a material for the education and training of safeguard organization. In Korea, as well as Presidential Security Service, national security departments have selected it as an important model for the subjects such as 'Security Analysis, 'Security Practice' and 'Security Methodology'. In the performance of security duty, security skill is the most important matter. Moreover, it has a close relationship with politics, society and culture. The purpose of this study is to analyze and reevaluate the case, which has been treated as a usual model from the aspect of security analysis, beyond its introduction. Attempted assassination of President Reagan was evaluated as a positive success example because of its rapid response of adjacent guards to evacuate Reagan, who is a guard target, within 10 seconds after the shot. When comparing it to President Kennedy Assassination of 1963, it was evaluated that guards were significantly specialized. In the study, however, it was possible to found many problems such as carelessness of guard, who is in charge of external area of event place, idle attitude for frequently used event place, confusion of wireless communication, risk of wireless security disclose, insufficient provision of compulsory record file, insufficient profiling of dangerous person and unsecured hospital and first-aid room.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.27-38
• /
• 2018

Groundwaters in different rock types (Mesozoic granite, Precambrian gneiss, and schist) of Ganghwa island, Incheon City were characterized by using naturally occurring radioactive materials (NORM) and hydrogeochemical constituents. For the study, groundwater samples from 69 wells had been collected over eight years. Statistical methods were applied to relate hydrogeochemical components and NORM in the groundwater samples. The groundwater samples belonged to $Ca(Na)-HCO_3$ types. The uranium concentrations in three groundwater samples exceeded 30 ug/L of United States Environmental Protection Agency (US EPA) maximum contaminant level (MCL). The radon concentrations in 28 groundwater samples exceeded 4,000 pCi/L (picocuries per Liter) of US EPA alternative maximum contaminant level (AMCL). Gross-alpha in all the groundwater samples did not exceed 15 pCi/L of US EPA MCL. The average concentrations of uranium and radon in groundwater were the highest in granite area, and then gneiss, schist areas in order. In schist area, the correlation coefficient (R) between radon and $HCO_3$ is -0.40 and R between uranium and $SO_4$ is 0.54. In gneiss area, the R between radon and uranium is 0.55 and the R between uranium and $SO_4$ is 0.41. According to factor analysis, each geological area shows different chemical characteristics. The statistical analysis of whole groundwater resulted in nearly no significant relationship among uranium, radon and chemical constituents. Subsequently, more detailed studies on hydrogeological, geochemical, and geological characteristics related to NORM are required to better understand the behavior and fate of NORM.

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.117-124
• /
• 2008

Salvinia is an aquatic plant forming dimorphic leaves that have been modified into floating and submerged leaves. A air of floating leaves plays an important role for the floating and photosynthesis while the submerged leaves, which are lim and long, have the form and function of root. Many aquatic plants develop trichomes in the epidermis but in Salvinia, richomes grow densely in the epidermis of the dimorphic leaves. The present study examined the differentiation pattern of trichomes developing in the floating leaves of S. natans and S. molesta by scanning and transmission electron microscopy. Trichomes developing in the floating leaves of Salvinia showed very different patterns. In S. natans, they were arranged in a V-shape form, having 20${\sim}$25 rows at $18{\sim}25^{\circ}$ on both sides of the lamina divided by the midrib in the floating leaf. In each row, 8${\sim}$10 oval-shaped cells, $200{\sim}290{\mu}m$ in length, were arranged in a spiral fashion. Four trichomes of this form made a trichome unit, but their apical parts were separated from one another and developed into the so-called 'knuckle-crane' type. On the other hand, in S. molesta, trichomes differentiated in a unique pattern quite different from those of S. natans. At the early stage of differentiation, trichomes protruded from the epidermis and then 4${\sim}$6 cylindrical cells grew $400{\sim}600{\mu}m$ long and the four trichomes formed as an unit. The four grouped trichomes were interconnected through their apex and developed in the 'egg-beater' type. Then $300{\sim}600{\mu}m$ long multi-cellular stalk cells grew and protruded out of the epidermal surface from the basal part of the trichomes. Such a structural characteristic of trichomes is considered to play a very important role along with the aerenchyma tissue in the leaf mesophyll tissue for the floating of Salvinia on the water surface.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.273-285
• /
• 2009

Statement of problem: The aim of dental research is to advance scientific knowledge and leads to improvement in the treatment and prevention of dental disease. Utilizing an effective research design and adequate statistical methods are essential procedures ensuring that the results of researches are based on evidences. A research should utilize proper statistical methods without statistical errors; Otherwise, it could adversely affect clinical practice and future research. Purpose: This study was made to investigate the statistical methods used in the Journal of Korean Academy of Prosthodontics (JKAP) and then to assess them for the statistical errors. Material and methods: Among the total of 399 articles in the JKAP published from 2000 to 2006, 292 articles using statistics were reviewed. The validity of the statistical methods used in them were assessed using a checklist based on the guideline for statistical reporting in the uniform requirements for manuscripts submitted to biomedical journals by International Committee of Medical Journal Editors. The checklist consisted of three categories of statistical errors: 1) Unspecified computer statistical packages, 2) Inadequate description of statistical methods, 3) Misuse of statistical terms. Then, the results were compared between the Korean version and the English version in the JKAP. Results: Among the 212 articles using statistics in the Korean version, 115 articles (54%) and among the 80 articles using statistics in the English version, 47 articles (59%) were shown to have unspecified computer statistical packages without statistically significant difference (P = .66). Likewise, 101 articles (48%) in the Korean version and 25 articles (31%) in the English version were shown to have the inadequate description of statistical methods without statistically significant difference (P = .09). However, 114 articles (54%) in the Korean version and 19 articles (24%) in the English version were shown to have the misuse of statistical terms with statistically significant difference (P = .01). Conclusion: Some of the articles in the JKAP had inadequate statistical validity, given the statistical errors identified in this assessment. Hence, dental researchers should be more careful when it comes to describing and applying statistical methods.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.209-217
• /
• 2002

There have been many studies on the application of the reciprocal advantages of multimodality image to define accurate target volume in the Process of radiation treatment planning. For the proper use of the multimodality images, the registration works between different modality images should be performed in advance. In this study, we selected chamfer matching method and mutual information method as most popular methods in recent image registration studies considering the registration accuracy and clinical practicality. And the two registration methods were analyzed to deduce the optimal registration method according to the characteristics of images. Lung phantom of which multimodality images could be acquired was fabricated and CT, MRI and SPECT images of the phantom were used in this study. We developed the registration program which can perform the two registration methods properly and analyzed the registration results which were produced by the developed program in many different images' conditions. Although the overall accuracy of the registration in both chamfer matching method and mutual information method was acceptable, the registration errors in SPECT images which had lower resolution and in degraded images of which data were removed in some part were increased when chamfer matching method was applied. Especially in the case of degraded reference image, chamfer matching methods produce relatively large errors compared with mutual information method. Mutual information method can be estimated as more robust registration method than chamfer matching method in this study because it did not need the prerequisite works, the extraction of accurate contour points, and it produced more accurate registration results consistently regardless of the images' characteristics. The analysis of the registration methods in this study can be expected to provide useful information to the utilization of multimodality images in delineating target volume for radiation treatment planning and in many other clinical applications.

• Sijohaknonchong
• /
• v.30
• /
• pp.109-146
• /
• 2009

It is academically recognized that Jeong Wan-Young's sijo better represent Oriental ideas. The purpose of this study is to investigate Taoistic characteristics of Jeong Wan-Young's sijo. This is an effort to succeed and further deepen and extend previous relevant researches. For the purpose, this researcher categorized the poet's sijo in accordance with such characteristics as above mentioned. Findings of the study can be summarized as below. Pieces of Jeong Wan-Young's sijo which are based on Taoistic ideas are largely classified into three groups. First, some pieces of Jeong Wan-Young's sijo represents an orientation of return to hometown which is brought by the sense of loss. His sense of loss is attributed to the facts that his home is not what it was any longer and that he can't return to the old home. To overcome the sense, nevertheless, the poet is dreaming of return to home. The home found in Jeong Wan Young's sijo is something fundamental and original that he purposedly provided against the feeling of loss. It complies with the concept of 'Bokgwigigen(復歸基根)‘ a pursuit of Taoism. Second, other pieces of Jeong Wan-Young's sijo are seeking purity to retrieve childish innocence. Their subjects include the season of spring, dreams of childhood and longing for mother all of which represent the poet's strong desire for such retrieval as above mentioned. It may be said that pursued by that pieces are 'Purity, Feebleness and Smoothness' that are sought by Taoism. Third, other pieces of Jeong Wan-Young's sijo are considering human as a part of nature and seeking human life in harmony with nature. In other words, they are seeking union between human and nature which means going beyond discrimination between self and external objects, that is, 'Mulayangmang(物我兩忘)'. This may refer to return to nature which is the ultimate destination of Taoism.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.265-271
• /
• 2015

This study has an objective not only to be helpful to the understanding about students' career and employment preparation by investigating the present conditions which are related with vocational consciousness and job values of dental hygiene department graduating students. Study subjects were 350 female graduating students in 3-year-course College, dental hygiene department at five areas of Seoul, Gyeonggi, Gangwon and Gyeongnam. Data were analyzed using IBM SPSS Statistics ver. 19.0. Regarding job values, job prospect of dental hygienist is a little developmental (55.2%) and institution hoping to work is dental clinic (43.2%), reasons for employment in major area are good wage and working environment (24.0%). And regarding opinion about job, dental hygienist job is a measure for living income (69.7%). Regarding job selection conditions, 35.0% subjects replied good human relationship. In the questionnaires regarding professional job in vocational consciousness category, results showed high percentages in that 'the occupation is a job in charge of oral health improvement'; regarding academic area, 'scaling should be done better than dentist'; regarding human relationship, 'harmony between colleagues is closely related with job efficiency'; regarding work ethics, 'development of dental hospital (clinic) and dental hygienist is correlated.' In vocational consciousness of study subjects, higher major satisfaction showed significant differences in professional job consciousness and work ethics consciousness (p<0.05) and the correlation results in vocational consciousness areas showed all statistically significant correlations (p<0.01). In case that the characteristic in one type is higher among 4 types, all other types showed high characteristics and also showed high general vocational consciousness.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.2
• /
• pp.15-25
• /
• 2017

The objective of this study is to investigate the value of rock Korean chessboards as a corroborative evidence that go, the play culture naturalized from the past, was also performed under the pavilion of the mountain stream, and the old tree. This study executes analysis on the location and form of rock Korean chessboards, physical environment such as the position of surrounding space, the origin of the nomination, surrounding landscape, and historical significance through the research analysis of comprehensive present conditions, and highlights the position types, landscape significance, and preservation value of the rock Korean chessboards of Korea from diverse angles. The result is as follows. 1. The styles of Korean chess (將棋), which identically propagated in the representative countries of Eastern culture, Korea, China, and Japan, and modified in accordance with each country's idea and native tendency, were organized, and confirmed the Korean Go as a naturalized native culture. 2. Out of 15 rock Korean chessboards confirmed through this study, 9 (60%) were categorized as rock Korean chessboards, and 6 (40%) were categorized as stone Korean chessboards. Also, the average size of the go boards were $51cm{\times}46.6cm$, which demonstrated not much difference with present day universal go boards. The Pearson correlation coefficient between bed rock and go boards were 0.647, demonstrating a relatively high correlation; the research subject of rock go boards have been constructed in consideration of rationality, convenience, and the value of promotion of public welfare. 3. The results of analysis of location patterns of rock Korean chessboard showed that villages (87%), mooring (73%), plains (60%) and mountains (47%). The most frequent location pattern is mooring and village, and these two factors played the most important role in determining the location of the rock Korean chessboard.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.35-51
• /
• 2012

Cloud computing is internet-based computing where computing resources are offered over the Internet as scalable and on-demand services. In particular, in case a number of various cloud services emerge in accordance with development of internet and mobile technology, to select and provide services with which service users satisfy is one of the important issues. Most of previous works show the limitation in the degree of user satisfaction because they are based on so called concept similarity in relation to user requirements or are lack of versatility of user preferences. This paper presents cloud service selection reasoning which can be applied to the general cloud service environments including a variety of computing resource services, not limited to web services. In relation to the service environments, there are two kinds of services: atomic service and composite service. An atomic service consists of service attributes which represent the characteristics of service such as functionality, performance, or specification. A composite service can be created by composition of atomic services and other composite services. Therefore, a composite service inherits attributes of component services. On the other hand, the main participants in providing with cloud services are service users, service suppliers, and service operators. Service suppliers can register services autonomously or in accordance with the strategic collaboration with service operators. Service users submit request queries including service name and requirements to the service management system. The service management system consists of a query processor for processing user queries, a registration manager for service registration, and a selection engine for service selection reasoning. In order to enhance the degree of user satisfaction, our reasoning stands on basis of the degree of conformance to user requirements of service attributes in terms of functionality, performance, and specification of service attributes, instead of concept similarity as in ontology-based reasoning. For this we introduce so called a service attribute graph (SAG) which is generated by considering the inclusion relationship among instances of a service attribute from several perspectives like functionality, performance, and specification. Hence, SAG is a directed graph which shows the inclusion relationships among attribute instances. Since the degree of conformance is very close to the inclusion relationship, we can say the acceptability of services depends on the closeness of inclusion relationship among corresponding attribute instances. That is, the high closeness implies the high acceptability because the degree of closeness reflects the degree of conformance among attributes instances. The degree of closeness is proportional to the path length between two vertex in SAG. The shorter path length means more close inclusion relationship than longer path length, which implies the higher degree of conformance. In addition to acceptability, in this paper, other user preferences such as priority for attributes and mandatary options are reflected for the variety of user requirements. Furthermore, to consider various types of attribute like character, number, and boolean also helps to support the variety of user requirements. Finally, according to service value to price cloud services are rated and recommended to users. One of the significances of this paper is the first try to present a graph-based selection reasoning unlike other works, while considering various user preferences in relation with service attributes.