• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.159-159
• /
• 2011

수자원 공급의 시 공간적 편차가 큰 우리나라에서는 수자원을 이용하기 위해서 다수의 댐을 건설하고 있다. 특히, 생활수준의 향상으로 용수 수요가 급증하였기 때문에 용수가 부족한 곳에는 광역상수도 사업 등을 통하여 용수를 공급하고 있다. 댐에서 용수가 공급되기까지의 과정은 일종의 관수로 흐름으로 생각할 수 있다. 관수로 내를 흐르는 유체가 갑자기 정지하게 되면, 유체 운동 에너지의 변화가 유발되고, 그로 인해 관내에 급격한 압력의 상승이 일어나게 된다. 반대로 정지하고 있던 유체가 빠른 속도로 흐르게 되면 압력 감소가 급격하게 발생한다. 이와 같이 유체 운동 상태의 급변에 의한 압력변화와 그에 따른 압력파가 음속의 속도로 상 하류로 전파되는 현상을 수격작용(waterhammer)이라 한다. 통상적으로 수격작용은 밸브 개폐 정도가 갑자기 바뀔 때, 펌프의 급격한 기동이나 정지 시, 터빈 내 전력소요가 갑자기 바뀔 때, 댐 수위의 갑작스런 변화, 펌프 임펠러의 진동, 물 수요의 급격한 변화 등에 의해 발생하며, 수격작용은 유체의 질량과 운동량 때문에 관 벽에 큰 힘을 가하게 되어 정상적인 동수압 보다 몇 배나 큰 압력을 발생시킴으로 관 자체는 물론 펌프, 밸브, 터빈 등 관 시설물을 파손시키거나 진동, 소음 등을 야기시킴으로 대규모 건물, 공장, 발전소 등을 설계할 경우 그에 대한 적절한 대책을 강구하여야 한다. 특히 댐에 연결된 저수지 또는 조정지로부터의 도수로가 압력수로이며 그 길이가 상당히 크면 수차가 급정지했을 경우 수격작용에 의해서 압력터널 내에 과도한 압력상승이 일어난다. 이 압력상승을 방지함과 함께 발전소 부하의 증감에 따라서 수량을 공급하거나, 흡수할 목적으로 압력도수로와 수압관과의 접합부에 자유수면이 있는 수조를 설치한다. 이것을 조압수조(surge tank)라 한다(최영박, 1979). 조압수조에서 부하의 급속한 차단에 의해서 수차로 유입될 수량이 차단되면 도수로 내로 흘러 들어온 물은 관성 때문에 수조 내의 수위를 상승시키고, 수조 수위가 어느 정도 이상으로 되어 저수지 수위 보다 상승하면 수조로의 유입이 정지하고 반대로 수조에서 저수지로 역류하여 수조수위는 하강한다. 즉, 조압수조는 도수로 내에 발생한 과도한 압력을 수조 내 수면의 승강운동을 이용하여 감소시키고 원래의 안정적인 수위로 회복시킨다. 본 연구에서는 수격작용에 대한 댐 안정성을 확보하는 수단 중의 하나인 조압수조에 대해 살펴보았다. 연구대상으로 용담댐을 선정하였다. 용담댐에 대한 기존의 검토결과 수직 갱의 지름이 5m 이상이면 조압수조의 동적안정조건을 만족 시키는 것으로 조사되었다. 댐의 설계홍수위인 EL. 265.5m를 기준으로 조압수조의 안정성을 감소시키지 않는 범위 내에서 조압수조 내 격벽 설치 유 무에 따른 수조의 최적 크기를 산정하였다. 산정결과를 분석한 결과 동일 조건에서 격벽을 설치한 경우가 격벽을 설치하지 않은 경우에 비해서 조압수조의 면적이 약 21% 감소하는 것으로 나타났다.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.513-521
• /
• 2020

Launched in August, 2016, the online public benefit project ANT FOREST has planted more than one hundred million trees in desertification areas and is currently continuing on with its activities. It is a fruit of online communications network development, and the public benefit project based on this puts more emphasis on the spirits of public interest rather than the investments of public services, unlike traditional public benefit activities. Hence the purpose of this study is to figure out the interaction between the users supporting the online public benefit and the public benefit progress online. The study was divided into 4 stages in order to find out the interaction, key factors for users to continue to support online public interest. First, preceeding studies on online public benefit will be reviewed to understand the characteristics of online public benefit. Second, determine the public benefit nature of ANT FOREST and investigate the project progress. Third, review the usage rate of ANT FOREST and categorize the properties of users. Fourth, interview was conducted to direct the interaction between the online public benefit project and the user. In conclusion, the online public benefit project completes the public benefit process through the user, the operator, and the supporter, the important factor connecting the energy connecting the process in cyber space and the public benefit activity in reality is the sense of participation, and the user continues the public benefit project through this sense of participation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.183-191
• /
• 2011

The objective of this study is 10 investigate the method to produce urban climate map so as to cope with climate change and efficiently control greenhouse gas in the city by using GIS. To produce urban climate map by using GIS, statistical data and spatial data of greenhouse gases related to climate change were collected and analyzed and the correlation between the type of urban climatop and urban climate change was analyzed by establishing GIS framework data construction method to prepare urban climate map and preparing and analyzing urban climate map related to the demonstration area. It was found that exact greenhouse gases emission quantity and absorption quantity can be calculated for each type of urban climatop by preparing urban climate map and the temperature is high in residential area, commercial area and industrial area and the emission quantity per unit area is high in the traffic area and industrial area. It seems that the influence of climate change can be presented for urban development by suggesting urban climate change for type of urban climatop and they can be utilized to save energy in urban area and to establish greenhouse gases reducing policy.

• Journal of the Korean Regional Science Association
• /
• v.35 no.3
• /
• pp.59-76
• /
• 2019

This study aims to develop urban scenarios for future cities and validate the future city scenarios using a Delphi method. The scenarios of future city was derived from urban structure, land use, transportation, and urban infrastructure and development using big data analysis, environmental scanning techniques, and literature review. The Delphi survey interviewed 24 erudite scholars and experts across 6 nations including Korea, USA, UK, Japan, China, Australia and India. The Delphi survey structure was designed to test future city scenarios, verified by the 5-point Likert scale. The survey also asked the timing of each scenario likely happens by the three terms of near-future, mid-future and far-future. Results of the Delphi survey reveal the following points. Firstly, for the future urban structure it is anticipated that urban concentration continues and higher density living in global mega cities near future. In the mid-future small and medium size cities may decrease. Secondly, the land use pattern in the near-future is expected of increasing space sharing and mixed or layered vertical land-use. In addition underground space is likely to be extended in the mid-future. Thirdly, in the near-future, transport and infrastructure was expected to show ICT embedded integration platform and public and private smart transport. Finally, the result of Delphi survey shows that TOD (Transit Oriented Development) becomes a development norm and more emphasis on energy and environment fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.577-586
• /
• 2018

In Korea, sustainability is mandatory in every field. University campuses are educational facilities that consume considerable amounts of energy. Therefore, many universities have tried to take advantage of the last opportunity to prepare students with sustainability and leadership. This study compared the green campus policy and evaluation criteria among Korea, US AASHE, UNEP, and ISCN-GULF to vitalize the green campus movement and suggest recent research data for the Korea green campus accreditation. The results are as follows: 1. new evaluation criteria need to be added to the certified green building total floor area ratio instead of adapting the G-SEED system in the Campus Resource & Environments category; 2. Korean Green Campus Evaluations need to be improved when expressing the campus individuality by choosing an increased number of credits and criteria; and 3. new evaluation criteria are required to secure the result, feedback, and products from curriculum updates in the Campus Education category.

• Environmental and Resource Economics Review
• /
• v.16 no.1
• /
• pp.99-127
• /
• 2007

When the margin between available capacity and demand is thin in a liberalized electricity market, prices rise steeply and system reliability is threatened. The principal response to these circumstances is often an assumption that price spikes and electricity shortages are the result of a failure to build sufficient new supplying facilities. It is, of course, often the case that additional investments in generation and network facilities would improve reliability, and such investments are often needed. But focusing on additional generation and transmission facilities for restoring balance to the grid overlooks the essential fact that reliability is a function of the relationship between supply and demand, imposing unnecessary costs on electric system. When the relationship is out of balance, the search for solutions must consider not only investments supply-side resources but also cost-effective demand-side resources such as accelerated load management, efficiency measures, and price-responsive load programs. Integrating demand resources into electricity markets can add enormous value to the electric system, widening the capacity margin, lowering costs and enhancing system reliability at the same time. This paper studies several challenges now facing electricity markets: demand-side management-especially, economic effects of demand response, potential reliability problems, market and system operation, CBP market improvements and so on. The paper concludes with a series of policy recommendations in five areas: (i) The Effects of efficient improvement to incorporate demand responses and demand-side resources into modem electricity markets, (ii) Fosteing price based demand response and (iii) improving incentive based demand response, (iv) strengthen demand response analysis and valuation, (v) integrating demand response into resource planning and adopting enabling technologies.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.63-68
• /
• 2010

Utility-Pipe Conduit is, Housing and city effectively accommodate what they absolutely need power, communications, gas, pipeline, water supply, drainage, energy facilities etc, according to expansion of urban infrastructure are derived, several ways to solve problems in, collection facilities in place are maintained and managed facility. If Utility-Pipe Conduit is damaged, as well as national security, because their impact on society as a whole, by introducing large vulnerability in the fire prevention activities and suppression measures and disaster for our situation by introducing measures, comprehensive analysis of the fire risk, it shall establish fire prevention activities and suppression through analysis of Utility-Pipe Conduit design, institutional issues, the problem of fire protection facilities, fire spread phenomenon etc. Because of Utility-Pipe Conduit is an enclosed place, so incomplete combustion due to lack of oxygen supply that there are problem such dark smoke, carbon monoxide etc, toxic combustion products and heat generation and visual impairment is an issue difficult to enter. As well as fire prevention activities, the fire In light of the particularity of the under ground than above ground fire, so this phenomenon is weak fire fighting that fire to become effective fire fighting tactics, basically it is necessary difficulty softening, non-burn softening and prevent combustion expansion of the cable is installed on the Utility-Pipe Conduit, having to considering the specificity of the response command system and relevant organizations to establish an on-site, Structural identification and other information gathering required to record of Response agencies, keep air conditioning system 24 hours and strengthening Virtual Total Training of Response agen

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.466-473
• /
• 2020

Fabric current collector can be a promising electrode material for Capacitive Deionization (CDI) system that can achieve energy-efficient desalination of water. The one of the most attractive feature of the fabric current collector is its high tensile strength, which can be an alternative to the low mechanical strength of the graphite foil electrode. Another advantage is that the textile properties can easily make shapes by simple cutting, and the porosity and inter-fiber space which can assist facile flow of the aqueous medium. The fibers used in this study were made of woven structures using a spinning yarn using conductive LM fiber and carbon fiber, with tensile strength of 319 MPa, about 60 times stronger than graphite foil. The results were analyzed by measuring the salt removal efficiency by changing the viscosity of electrode slurry, adsorption voltage, flow rate of the aqueous medium, and concentration of the aqueous medium. Under the conditions of NaCl 200 mg/L, 20ml/min and adsorption voltage 1.5 V, salt removal efficiency of 43.9% in unit cells and 59.8% in modules stacked with 100 cells were shown, respectively. In unit cells, salt removal efficiency increases as the adsorption voltage increase to 1.3, 1.4 and 1.5 V. However, increasing to 1.6 and 1.7 V reduced salt removal efficiency. However, the 100-cell-stacked module showed a moderate increase in salt removal efficiency even at voltages above 1.5 V. The salt removal rate decreased when the flow rate of the feed was increased, and the salt removal rate decreased when the concentration of the feed was increased. This work shows that fabric current collector can be an alternative of a graphite foil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.633-641
• /
• 2008

Since WSNs encounter attacks, such as jamming or eavesdropping without physical access occurs, security is one of the important requirements for WSNs. The key pre-distribution scheme that was recently researched for advance of security in WSNs distributes the keys and probability with the use of q-composite random key pre-distribution method, but there is a high probability that no key shared between sensor nodes, and it takes a lot of time and energy to find out the shared key. Therefore, it is not suitable for WSNs. In order to enhance stability of a node that plays a role of gateway without depending on probabilistic key, this paper proposesa key pre-distribution scheme combined with random key pre-distribution scheme and double hash chain. Since the proposed scheme can maintain a small storage place and strong security strengths, it is more efficient than the existing schemes with the same security strengths. In addition, since it uses a small size of key generation key set, it can reduce a great deal of storage overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.311-316
• /
• 2018

As the lives of people have improved, the demand for improved indoor air quality has increased. Various methods are used to remove biological air pollutants, such as UV/photocatalytic devices and ozone generators. However, these methods have disadvantages such as energy consumption, high corrosivity and toxicity. To overcome these disadvantages, an antibacterial copper filter was fabricated and its antimicrobial activity was then tested against two fungi (P. pinophilum, C. globosum) and one bacteria (S. aureus) Moreover, the ability to remove suspended microorganisms was tested step by step from the chamber stage to the air conditioning system. The results revealed 100% antimicrobial activity after 24 hours for the two fungi, while this value was 99.9% after 18 hours for the bacteria. Moreover, the antibacterial activity was higher when the chamber and air purifier were used than was obtained using a general antibacterial HEPA filter. Also, as a filter for system air conditioner, the antibacterial activity was lowered in offices and hospitals. In conclusion, the copper filter was found to have sufficient antibacterial activity for use as an antibacterial filter; however, further research on its preparation methods and materials is warranted.