• Korean Journal of Environmental Biology
• /
• 제33권1호
• /
• pp.7-18
• /
• 2015

In this study, we studied the effect of dissolved cement powder on Carassius auratus by analysis of the morphophysiological changes. The gill exposed to dissolved cement powder showed the thickened primary lamellae and the activity of chloride cells and mucous cells was also significantly increased and the proliferation, separation and clubbing of gill filament was observed in the secondary lamellae. In the kidney tissue, the space in Bowman's capsule was widen and the arrangement of dermis was irregular due to the thinned epidermis in the integument tissue. The activities of antioxidant enzymes and LDH tended to increase with the duration of cement exposure. It was confirmed that the up-regulated proteins were identified as involved in glycolysis and energy metabolism and down-regulated proteins were myofibrillar proteins which were involved in muscle contraction by the cement exposure to the integument. With these results, dissolved cement powder was thought to be a big threat to the survival of the fish because it causes the morphological changes and weakens the physiological activity in C. auratus tissues.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제9권3호
• /
• pp.294-302
• /
• 2004

In this study, we developed the inverter system to control Induction motor for the vertically circulation parking facility. In the case of calling a pallet, a car parking space, we basically stoned conventional system's problems, pallet is uncontrollable to the fixed position and braking system was worn by forcer braking with remaining speed. Also, by appling to converter controller, added to power regenerative control function, we confirmed the reduce of power supply capacity and the energy saving effect according to increasing operation frequency. The validity of this system is verified by 55kw induction motor driving system. Via this study, the proposed system shows the efficient use of parking facility and good operation characteristics by implementing position and speed control effectively on condition of load and shows energy saying effect by power factor control for the vertically circulation parking facility operation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제38권5호
• /
• pp.548-555
• /
• 2001

In this paper, we proposed a HVS(human visual system) model-based digital image watermarking which is not only invariant to rotation and translation but also more robust to lossy compression, cropping, and scaling as compared to the conventional method. Fourier transform and log-polar mapping is used to make the proposed algorithm invariant to rotation and translation, and in addition, watermark energy is embedded maximally based on spatial frequency sensitivity of HVS without the deterioration of the invisibility. As a result, the robustness of watermarking is improved both in general image processing operations such as cropping, low pass filtering, and lossy compression and in geometrical transforms such as rotation, translation, and scaling. And, by disjoint embedding of the watermark and the template without intersection, the deterioration of invisibility and robustness is prevented. Experimental results show that proposed watermarking is about 30~75 [%] more robust af compared to the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제38권5호
• /
• pp.464-473
• /
• 2001

Since DCT algorithm divides an image into blocks uniformly in both the spatial domain and the frequency domain, it has a weak point that it can not reflect HVS(Human Visual System) efficiently To avoid this problem, we propose a new algorithm, which combines only the merits of DCT and wavelet transform. The proposed algorithm uses the high compaction efficiency of DCT, and applies wavelet transform mode to DCT coefficients, so that the algorithm can utilize interband and intraband correlations of wavelet simultaneously After that, the proposed algorithm quantizes each coefficient based on the characteristic of each coefficient's band. In terms of coding method, the quantized coefficients of important DCT coefficients have symmetrical distribution, the bigger that value Is, the smaller occurrence probability is. Using the characteristic, we propose a new still image coding algorithm of symmetric and bidirectional tree structure with simple algorithm and fast decoding time. Comparing the proposed method with JPEG, the proposed method yields better image quality both objectively and subjectively at the same bit rate.

• Journal of Radiation Protection and Research
• /
• 제32권4호
• /
• pp.158-167
• /
• 2007

It is required that the neutron dosimetry be present to monitor the reactor vessel throughout its plant life. The Ex-vessel Neutron Dosimetry Systems which consist of sensor sets, radiometric monitors, gradient chains, and support hardware have been installed for 3-Loop plants after a complete withdrawal of all six in-vessel surveillance capsules. The systems have been installed in the reactor cavity annulus in order to characterize the neutron energy spectrum over the beltline region of the reactor vessel. The installed dosimetry were withdrawn and evaluated after a irradiation during one cycle and then compared to the cycle specific neutron transport calculations. The reaction rates from the measurement and calculation were compared and the results show good agreements each other.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제34권12호
• /
• pp.90-95
• /
• 2006

The wall of thermal vacuum chamber which is used for the satellite thermal balance test doesn't absorb satellite's IR emission perfectly and reflects some part of that. It is estimated that small thermal vacuum chamber has relatively larger wall effect than the big one. The small thermal vacuum chamber is required for the small satellite test to reduce the test cost. A quantitative analysis was carried out to investigate the chamber wall effect. As a result, temperature errors caused by chamber wall effect was calculated, and the temperature data acquired in the thermal balance test have been compensated. By defining the optimized area ratio between chamber surface and satellite surface area, the baseline to be able to determine the minimum size of thermal vacuum chamber was established to minimize the wall effect. Also, theoretical analysis about transparent material coating which can reduce the chamber wall effect is conducted.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.41.1-41.1
• /
• 2011

본 연구에서는 MOCVD법으로 사파이어 기판위에 u-GaN를 성장한 후 Mg을 도핑시켜 p-GaN를 성장하고, RF 스퍼터를 이용하여 n-ZnO를 도포하여 n-ZnO/p-GaN 이종접합을 형성한 후 진공증착기를 이용하여 Au/Ni를 증착시켜 발광다이오드(LED)를 제작하고 전기 광학적 특성을 조사하였다. 두께가 500 nm인 u-GaN 위에 성장된 p-GaN의 운반자 농도는 $1.68{\times}10^{17}\;cm^{-3}$ 이었다. 그리고 150, 300 nm 두께의 p-GaN에 대하여 측정된 DXRD 반치폭은 각각 450 arcsec, 396 arcsec 이었고, 상온에서 2.8~3.0 eV 영역에서 Mg 억셉터와 관련된 광루미네센스가 검출되었다. RF 스퍼터링에 의해 0.7 nm/min의 속도로 증착된 n-ZnO 박막은 증착 두께에 따라 비저항이 27.7 $m{\Omega}{\cdot}cm$ 에서 6.85 $m{\Omega}{\cdot}cm$ 까지 감소하였다. 그리고 n-ZnO 박막은 (0002)면으로 우선 배향되었으며, 상온에서 에너지갭 관련된 광루미네센스가 3.25 eV 부근에서 주되게 검출되었다. n-ZnO/p-GaN 이종접합 LED의 전류전압 특성곡선은 다이오드 방정식에 만족하는 특성을 나타내었다. 다이오드 지수는 3 V 이하 영역에서 1.64, 3~5 V 영역에서 0.85이었다. 그리고 5 V 이상 영역에서 공간전하의 제한을 받았으며, 다이오드 지수는 3.36이었다. 한편, 역방향 전류전압 특성은 p-GaN 박막의 두께에 영향을 받았으며, p-GaN 박막의 두께가 150, 300 nm 일 때 각각의 누설 전류는 $1.3{\times}10^{-3}$ mA와 $8.6{\times}10^{-5}$ mA 이었다. 상온에서 측정된 EL 스펙트럼의 주된 발광피크는 430 nm이었고, 반치폭은 49.5 nm이었다.

• Journal of Korea Multimedia Society
• /
• 제14권2호
• /
• pp.210-218
• /
• 2011

Generally, GIS digital map has been represented and transmitted by ASCII and Binary data forms. Among these forms, Binary form has been widely used in many GIS application fields for the transmission of mass map data. In this paper, we present a hierarchical compression technique of polyline and polygon components for effective storage and transmission of vector map with various degree of decision. These components are core geometric components that represent main layers in vector map. The proposed technique performs firstly the energy compaction of all polyline and polygon components in spatial domain for the lossless compression of detailed vector map and compress independently integer parts and fraction parts of 64bit floating points. From experimental results, we confirmed that the proposed technique has superior compressive performance to the conventional data compression of 7z, zip, rar and gz.

• Journal of the Korean Institute of Gas
• /
• 제5권4호
• /
• pp.21-26
• /
• 2001

Because of the continuous growth of energy consumption, and also tile tendency to site power lines and pipelines along the same routes, the close proximity of high voltage structures and metallic pipelines has become more and more frequent. Recently, the results of assessment about a system integrity are needed in korea also when a gas pipeline is running parallel with high voltage power line in same submarine tunnel, Therefore, we analyze the system integrity(AC corrosion of pipe, melting of pipeline coating, safety of insulation flange, especially cathodic protection system which are rectifier and CI(cathodic Isolator)) resulting from the influence of high voltage power system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권11호
• /
• pp.19-27
• /
• 2020

On an offshore plant topside, various types of offshore facilities for processing energy resources, such as oil and gas, and equipment and outfitting for connecting these facilities are installed in a limited space. An offshore plant superstructure is composed of numerous supporting rack structures and reinforcements for securing and supporting offshore installations and the related equipment. This paper describes the development of design support software to support this superstructure design efficiently. The developed design support software, which was based on AVEVA Marine's PML(Programmable Macro Language), supports the parametric method for superstructure design. A method of batch 3D modeling from 2D drawings for supporting rack structure produced in the basic and detailed design was also developed using AutoLisp. In addition, through the application example of superstructure module design, the design support software introduced in this paper can be expected to reduce the design time by more than 90% compared to the use of only basic functions of AVEVA PDMS.