• Membrane Journal
• /
• v.27 no.6
• /
• pp.477-486
• /
• 2017

Hydrogen is one of energy storage systems, which could be transfer from electric energy to chemical energy or from chemical energy to electric energy, and is as an energy carrier. Water electrolysis is being investigating as one of the hydrogen production methods. Recently, water electrolysis receive attention for the element technology in PTG (power to gas) and PTL (power to liquid) system. In this paper, it was explained the principle and type for the water electrolysis, and recent research review for the alkaline water electrolysis.

• Journal of Digital Convergence
• /
• v.9 no.5
• /
• pp.1-9
• /
• 2011

The smart grid can create benefits such as the expansion of consumer choice and flexibility enhancement, adaption to future electric power industry change and the increasing use of renewable energy sources. Consumers can make a contribution to improve the overall effectiveness of system through active receptive response. They can enhance the energy consumption efficiency based on more information from service providers. The Smart Grid Promotion Act, which was enacted in April 2011, contains consumer protection provisions such as information collecting, sharing, and protection measures. On this reason, it is needed to expand promotion and education regarding the smart grid to improve the consumer awareness, and the schemes to enhance smart grid consumer acceptance should be established.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.185-202
• /
• 2016

Interests in renewable energy have been increasing with low-carbon policy and concerns about radioactivity. And solar energy is receiving attention as the most realistic energy in the industry. Demand for solar energy was started in Germany and European countries, and further expanding to other countries. And Korea became one of the high technology level countries in that industry. So, systematic analysis is needed for trading fact and overseas expansion of Korea's photovoltaic energy together with increased demand in the world. In this paper, we analyzed panel data for 25 years, from 1990 to 2014 from 11 countries that have track record with Korea's PV product. It is conducted based on Gravity model and matched with general report for Korean PV industry. But it shows different result for other factors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.95-102
• /
• 2022

It is a study for the evaluation of the stability of the distribution automation system for the expansion of renewable energy. Through the Renewable Energy 3020 Implementation Plan, the government plans to expand new renewable energy and convert it to participatory energy that improves the quality of life of the people by 2030. The government has set a target of 20% of domestic supply energy for renewable energy generation by 2030. It is planning to establish more than 95 percent of its new facilities with clean energy such as solar power and wind power. By expanding the supply of renewable energy, new energy businesses and distributed power industry were fostered, and short-distance, low-voltage, and small-scale power generation were rapidly expanded rather than large-scale power development in the past. Due to this demand, the importance of power distribution facility operation has emerged and the need for distribution automation system is increasing. This paper discusses the development of a power distribution simulator for the performance and function evaluation of power distribution automation systems and presents the results of an interlocking test with the power distribution automation system. In order to introduce an advanced system into the power distribution system, it is necessary to take advantage of the transmission and distribution system. The DNP3.0 protocol is used in the distribution system and the IEC61850 protocol is used in the transmission and distribution system. It was concluded that the functions and performance of operations were satisfied when these two protocols are mixed and used in the distribution automation system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.378-379
• /
• 2012

Nowadays, great energy consumption in advanced electrical industry has called up the great y efficiency. Electric power IT industry such as intelligent electric power system is receiving great attention and being marked up as a new growth engine. Through Intelligent electric power system, the electric power supply can be balance optimized according to demand, giving huge cost savings advantage for energy imports, infrastructure construction and operation. Nevertheless, the intelligent system promotes better reliability in power supply. Manual electric power management using man power appears to be non-practical. Real time electric power management on all facilities and equipment can be done through an intelligent electric power system, any accident break out issue can be easily recorded and recognized. In this paper, a fully integrated intelligent switchgear electric management system is developed to monitor and remote control the electrical switch based on smart phone. The proposed system is superior than the existing switchgear management system's weakness and can sharply improve effectiveness and stability with low cost. In future, the proposed system is expected to be greatly contributed to the advancement of the IT industry in electric power management.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.267-278
• /
• 2020

ESS is an essential requirement for resolving power shortages and power demand management and promoting renewable energy at a time when the energy paradigm changes. In this paper, we propose a cost-effective ESS Peak-Shaving operation plan through load and solar power generation forecast. For the ESS operation plan, electric load and solar power generation were predicted through RMS, which is a statistical measure, and a target load reduction guideline for one hour was set through the predicted electric load and solar power generation amount. The load and solar power generation amount from May 6th to 10th, 2019 was predicted by simulation of load and photovoltaic power generation using real data of the target customer for one year, and an hourly guideline was set. The average error rate for predicting load was 7.12%, and the average error rate for predicting solar power generation amount was 10.57%. Through the ESS operation plan, it was confirmed that the hourly guide-line suggested in this paper contributed to the peak-shaving maximization of customers.Through the results of this paper, it is expected that future energy problems can be reduced by minimizing environmental problems caused by fossil energy in connection with solar power and utilizing new and renewable energy to the maximum.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1830-1831
• /
• 2011

최근 스마트폰 등의 산업에서와 같이 발전플랜트에서도 가치창출의 중심이 하드웨어 제조 관리 기술에서 최적 제어 운용의 소프트웨어로 급속히 이동하고 있다. 국내외 발전사 및 관련 연구기관들은 발전플랜트 운용최적화를 위한 다양한 제어, 감시, 분석, 설계, 시뮬레이션, 자원관리 등의 다양한 분야에서 독립적인 소프트웨어 개발을 활발히 수행하고 있으나, 이들 간의 데이터, 이벤트 통신 및 서비스 연동은 미흡한 실정이다. 본 연구에서는 발전플랜트 관련 소프트웨어의 서비스 통합 기반을 마련하고, 안정성 재사용성 이식성 등의 품질을 제고하며 개발자가 쉽고 빠르게 소프트웨어를 구현할 수 있는 발전플랜트 소프트웨어 플랫폼을 제안한다. 이는 화력, 원자력 등의 중대형 발전플랜트 뿐만 아니라 점점 확대되고 있는 태양광, 태양열, 풍력 등 크고 작은 다양한 신재생에너지 발전기에 적용가능하며 발전 효율 및 안정성 향상과 발전플랜트 소프트웨어 산업의 활발한 생태계 조성에 기여할 것으로 기대된다.

• Fiber Technology and Industry
• /
• v.8 no.1
• /
• pp.51-62
• /
• 2004

모든 상품에 있어서의 기능성은 인본주의에 입각해서 판단되고 창조된다. 갈수록 편리함과 편안함, 안락감과 쾌적함을 추구하는 등 소비심리는 갈수록 감성화 되어가고 있고, 이러한 소비심리를 충족시키기 위한 제조기술 또한 첨단화 되어가고 있다. 섬유산업에 있어서도 21세기 신 섬유로 다양한 기술들이 제안되고 있고 매일 새로운 기술들이 창조되고 있다. 신체를 가리고 외부 환경으로부터 몸을 보호한다는 단순 기능적인 차원을 넘어 입어서 쾌적함과 안락함을 느낄 수 있는 감성기능의 의류개발이 줄을 잇고 있고 주위 환경을 감지 대응함으로써 자발적인 변화기능을 갖는 정보형 섬유도 등장하고 있다. 구체적인 예로 태양 에너지로 전기를 발생시키는 의복, 운동을 하다가 부상 위험이 있으면 경적을 울리는 섬유, 그리고 심장박동과 생리적인 건강을 모니터링 할 수 있는 시트 등 섬유를 혁신시키는 최첨단 화학물질, 즉 지능형 고분자에 대한 관심도 점차 높아지고 있다.(중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.263.1-263.1
• /
• 2014

현재 대기압 플라즈마는 신재생 에너지, 반도체, 표면처리, 바이오산업 등에서 다양하게 활용되고 있으며, 그에 대한 연구들이 진행되고 있다. 바이오산업에서의 플라즈마는 살균, 제독, 세포재생 등으로 연구되고 있으며, 이런 대기압 플라즈마의 응용은 꾸준히 증가하는 추세이다. 선행연구에 따라 멀티 플라즈마 젯 소스의 필요성이 제기되었으며, 플라즈마의 균일한 방전조건이 화두되어 왔다. 먼저 각 소스별 방전개시전압과 가스 유량에 따른 플라즈마의 전류와 전압 변화를 알아보았고, 이에 대한 문제점들을 보안하기 위해 앞서 연구한 멀티소스를 개선하여 플라즈마 방전 특성 연구를 진행하였다. 본 연구에서는 기체유입방식이 다른 두 종류의 멀티 플라즈마 젯 소스를 이용하여 각 소스 채널별 유량변화에 따른 방전개시전압과 전류, OES (Optical Emission Spectroscopy)로 각 소스의 플라즈마 방전 특성을 측정하여 각 소스의 채널별 방전 균일도를 비교 분석하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.3
• /
• pp.157-162
• /
• 2009

Significant air temperature increases in urban areas are known as the heat island phenomenon in a global scale. Therefore, we use numerical model in order to analyze quantitative effects by using new & renewable energy on the heat island phenomenon in urban area. The present study quantitatively analyzes the Urban Heat Island Effects, Energy-Saving Effects, and Environmental Load Decrease Effect along New and Renewable Energy Application which is 10% of the Building Energy Consumption.