• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.65-65
• /
• 1993

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.77-88
• /
• 2015

In this paper, we consider a two-agent single-machine scheduling problem with exponential job-dependent position-based learning effects. The objective is to minimize the total weighted completion time of one agent with the restriction that the makespan of the other agent cannot exceed an upper bound. First, we propose a branch-and-bound algorithm by developing some dominance /feasibility properties and a lower bound to find an optimal solution. Second, we design an efficient simulated annealing (SA) algorithm to search a near optimal solution by considering six different SAs to generate initial solutions. We show the performance superiority of the suggested SA using a numerical experiment. Specifically, we verify that there is no significant difference in the performance of %errors between different considered SAs using the paired t-test. Furthermore, we testify that random generation method is better than the others for agent A, whereas the initial solution method for agent B did not affect the performance of %errors.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.486-494
• /
• 2006

In this paper, we introduce a new solution for the load balancing problem, an important issue in parallel processing. Our heuristic load balancing technique called MGA effectively combines the benefit of both mean-field annealing (MFA) and genetic algorithms (GA). We compare the proposed MGA algorithm with other mapping algorithms (MFA, GA-l, and GA-2). A multiprocessor mapping algorithm simulation has been developed to measure performance improvement ratio of these algorithms. Our experimental results show that our new technique, the composition of heuristic mapping methods improves performance over the conventional ones, in terms of solution quality with a longer run time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.76-79
• /
• 2005

$Nd:YVO_4$ 연속발진 레이저(CW laser:Continuous wave laser)로 제작한 다결정 실리콘 박막의 이온도핑 효과를 조사하였다. PECVD로 증착한 비정질 실리콘 박막을 CW 레이저를 조사하여 결정화한 후 $B_2H_6$ 플라즈마 이온 도즈량을 변화시켜 이온 도핑을 하고 급속열처리 방법과 퍼니스 어닐링 방법으로 도펀트 활성화를 하였다. 이온 도핑된 CW 다결정 실리콘 박막의 이온 도즈량에 따른 판저항 변화를 비교하고, 급속열처리(RTA: Rapid Thermal Annealing)와 퍼니스 어닐링(FA: Furnace Annealing) 전후의 결정성 변화를 라만 스펙트럼(Raman spectrum) 을 통하여 분석하였다. 이온 도즈량이 증가함에 따라 판저항은 감소하고, 어닐링 후 이온 도핑에 의해 손상된 박막이 복원됨을 확인 할 수 있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.146-154
• /
• 2010

The effects of severe plastic deformation, equal channel angular pressing, and annealing of Al 5052 alloy on elastic modulus have been studied. The AI 5052 alloy was plastically deformed by ECAP method after solution treatment, and then finally annealing heat treated. Elastic modulus was measured by conventional tensile and nano-indentation test, and also measured on the surface of the specimen using acoustic material signature of the acoustic microscope. The variation in the elastic modulus influenced by plastic deformation and heat treatment, inaccessible by the conventional techniques, was successfully measured by acoustic material signature and obtained the elastic modulus depending on crystal orientation at each grain.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.91-98
• /
• 1992

In a $Co_{67}Fe_{4.5}Nb_{2}Si_{10}B_{15}$ amorphous alloy ribbon the effect to two-step annealing on the soft magnetic properties has been studied. By two-step annealing method which the second annealing at low temperature of $310^{\circ}C$ for 2 hours is undertaken after the primary annealing at high temperature above $480^{\circ}C$ for 20 minutes at the vacuum state, the coercive force and the squareness are not changed nearly but the initial permeability at d.c. and the effective permeability at a.c. are remark-ably increased compared with the one-step annealing. The maxima of the initial permeability and the effective permeability at 1 kHz after the two-step annealing are 290,000 and 41,000, respectively, which are 30% higher than those of the one-step annealing. The change of magnetic properties with annealing temperature is discussed in terms of the residual stress, the domain size, the cluster and the crystalline phase.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.106-118
• /
• 1995

In this work, the optimized design methodology in high-level synthesis related with scheduling and hardware allocation is developed by simulated annealing technique effectively modified . Applying this method to digital filter design, the optimized tradeoff problem of speed and hardware costs in pipelined digital filter case and array digital filter case are investigated. While, it is confirmed that the suggested method gives the improved cost function value faster and can be used in complicated digital filter design.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.253-258
• /
• 1996

본 연구는 Zr-2.5wt%Nb합금의 고온변형특성중 특이한 유동응력의 변화거동인 어닐경화와 유동연화의 기구에 대해 고찰하였다. 연구결과에서 이러한 고온변형특성은 온도와 다단변형도중의 어닐링 시간에 영향을 받는 것으로 나타났으나 분위기 영향은 없는 것으로 나타났다. 즉, 변형 온도와 동일온도인 85$0^{\circ}C$에서 단시간인 5분동안 어닐링을 했을때 경화현상이 일어났다. 미세조직을 관찰한 결과 다단열간압연된 후의 미세조직과 집합조직은 다단열간압연된 미세조직과 집합조직과 직접적인 상관관계를 가진 것으로 나타났다. 어닐경화현상은 다단고온변형이 궁극적으로 변형시효와 유사한 효과 즉, 중간어닐링 동안에 Zr-2.5wt%Nb내의 불순물 원자와 열간압연시에 형성된 전위구조와의 강력한 인력형 상호작용하여 substructure가 안정화되기 때문이며 유동연화는 재결정으로 인한 유동응력의 감소인 것으로 사료된다.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1448-1450
• /
• 2001

본 연구에서는 알루미늄 마스크를 이용하여 다결정 실리콘 결정립의 수평성장을 유도하는 새로운 엑시머 레이저 어닐링 방법을 제안한다. 제안된 방법은 비정질 실리콘 박막 위에 알루미늄 패턴을 형성하여 선택적으로 레이저 빔을 차단시키고, 액상 실리콘의 열을 금속박막을 통해 방출시킴으로써 다결정 실리콘 결정립의 수평성장을 유도할 수 있다. 제안된 레이저 결정화 방법을 이용하여 최대 1.6${\mu}m$의 수평성장 결정립을 형성하였고, 알루미늄 패턴의 경계로부터 결정립을 성장시킴으로써 결정립 경계의 위치를 제어하였다. 제안된 방법을 이용하여 제작한 다결정 실리콘 박막 트랜지스터는 기존의 다결정 실리콘 박막 트랜지스터에 비해 전계효과 이동도 및 온/오프 전류비 등의 전기적 특성이 우수하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.871-875
• /
• 2000

Effects of liquid crystal (LC) alignment using a in-situ photoalignment method by polarized UV exposure on a polyimide (PI) surface with medium side chain were studied. The generated pretilt angle in nematic(N) LC using a in-situ photoalignment method was smaller than that of a conventional photoalignment method for short UV exposure time. Also, the pretilt angle of NLC using a in-situ photoalignment method increases with increasing UV exposure time on the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.