• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.30-37
• /
• 1998

This paper investigates the linear stability of wakes with special emphasis on the effect of chemical reaction. Velocity and density profiles for laminar flows are obtained from analytic profiles as well as from simulation. Wakes have two generalized inflection points and two unstable modes-sinuous and varicose modes. For analytical laminar profiles, sinuous modes are more unstable than varicose modes irrespective of density variation, which shows wakes will be destabilized by sinuous modes. Large velocity difference and density difference lead to more unstable wakes due to large momentum difference. For simulated laminar profiles, chemical reaction with stoichiometric chemistry increases temperature and stabilizes the flow due to increase in compressible reacting wades, flow becomes stable as velocity increases due to viscous dissipation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1915-1927
• /
• 1992

A three-dimensional Navier-Stokes code has been developed for analysis of viscous flows through turbomachinery blade rows or other internal passages. The Navier-Stokes equations are written in a cartesian coordinate system, then mapped to a general body-fitted coordinate system. Streamwise viscous terms are neglected and turbulent effects are modeled using the baldwin-Lomax model. Equations are discretized using finite difference method on the stacked C-type grids and solved using LU-ADI decomposition scheme. calculations are made for a two-dimensional cascade in a transonic wind-tunnel to see the infuence of the endwalls. The flow pattern of the three-dimensional flow near the endwall is found to be different from that of the two-dimensional flow due to the existence of the endwalls.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.55-57
• /
• 2016

본 연구에서는 초고속 자기부상열차의 단면도를 통하여 2-D형상을 모델링하고 이를 기반으로 항력과 유동 특성에 대한 분석을 수행하였다. 유동의 마하수가 0.3 이상임을 고려하여 압축성 모델이 사용되었고, 난류모델은 Menter's k-w SST(Shear Stress Transport)모델을 적용시켰다. 2-D 해석과 자기부상열차의 특성상 열차가 공기중에서 주행하고 있는 것으로 가정하고 공력 특성을 해석하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2001

A numerical solution method of the incompressible Reynolds-Averaged Navier-Stokes equations is applied for calculating turbulent flows and performances of a marine propeller in open-water, four-quadrant conditions. Computed propeller flows of the model propeller P4381, for which the experimental data of the open-water performances exist, reveal complex viscous-flow characteristics including three-dimensional flow separations in various off-design conditions and also computed propeller thrusts and torques agree quite well with experimental data except some cases for which severe propeller cavitations occurred in the experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.17-27
• /
• 2009

Two-phase RoeM and AUSMPW+ schemes are preconditioned for the simulation of all Mach number flows, which are generally of interest for many gas-liquid two-phase application problems, because of large speed of sound in liquid region and low speed of sound in mixture or gas region. Conventional characteristic based schemes lose their accuracy or robustness in low Mach number flows, because their numerical dissipation terms are scaled by speed of sound, which is too large compared with local velocity magnitude in a low Mach region. All speed versions of RoeM and AUSMPW+ reflect the eigenvalues of the preconditioned governing system, which have the same order of magnitude even in low Mach number region. From the asymptotic analysis, it is observed that the discretized system by the developed schemes is consistent with the continuum system in the incompressible limit. The numerical results show the accurate and robust behavior of the proposed shcemes for all speed two-phase flows.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.240-243
• /
• 2001

괘도차량에 부착된 물분사추진기의 유동해석을 실험과 포텐셜해석 그리고 점성해석을 사용하여 그 결과를 비교하였다. 예인수조에서 여러 차량 전진속도에 대해서 임펠러 회전수를 조정하여 제트속도를 변화시키면서 덕트표면에서의 정압을 계측하였다. 이는 제트시스템의 효율을 추정하기 위함이고 관로를 통한 에너지분포를 알 수 있다. 점성유동해석을 위해 지배방정식은 비압축성 Navier-Stokes 방정식을 유한체적법을 사용하여 이산화하고 해석하였으며 난류영향은 표준 ĸ-$\varepsilon$난류모형을 사용하여 유동을 해석하고 실험결과 및 포텐셜 해석결과와 비교하였다.

• Journal of computational fluids engineering
• /
• v.5 no.3
• /
• pp.23-31
• /
• 2000

The three-dimensional unsteady compressible Full Navier-Stokes equation solver with sliding multi-block method has been applied to analyze three dimensional characteristics of the viscous flow field and compression wave around the high speed train which is entering into a tunnel. The numerical scheme of AF + ADI was used to efficiently solve Navier-Stokes equations in the curvilinear coordinate system. The vortex formation owing to the viscous interaction around the train was found and the generation of compression wave due to the blockage effects was observed ahead of the train in the form of plane wave. The three dimensional characteristics of the flow field compared to the analytic results were discussed in detail. The variation of pressure of tunnel wall surface and velocity profile of the train are identified as the train enters into a tunnel. The changes in aerodynamic forces and streamlines of each specific sections are also discussed.

• Journal of computational fluids engineering
• /
• v.14 no.4
• /
• pp.93-100
• /
• 2009

The gridless (or meshfree) methods, such as MPS, SPH, FPM an so forth, are feasible and robust for the problems with moving boundary and/or complicated boundary shapes, because these methods do not need to generate a grid system. In this study, a gridless solver, which is based on the combination of moving least square interpolations on a cloud of points with point collocation for evaluating the derivatives of governing equations, is presented for two-dimensional unsteady incompressible Navier-Stokes problem in the low Reynolds number. A MAC-type algorithm was adopted and the Poission equation for the pressure was solved successively in the moving least square sense. Some typical problems were solved by the presented solver for the validation and the results obtained were compared with analytic solutions and the numerical results by conventional CFD methods, such as a FVM.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.90-95
• /
• 1998

본 고에서는 비압축성 점성유체의 유한요소해석 기법을 소개하였다. 대류항의 상류화 기법으로 안정된 해를 도출할 수 있으며 Penalty 방법에 기반하여 압력항을 지배방정식으로부터 소거함으로써 해석시간과 요구저장공간을 감소시켰다. 실린더 주변의 유동장을 해석하여 와의 방출을 성공적으로 묘사하였으며 항력계수를 17%정도의 오차로 계산하였다. 적응적 요소세분화 기법에 대한 연구를 통해 적절한 오차평가 기법 및 최적의 체눈을 형성하는 기법을 제시하였다. 또한 동적 해석에 적합한 요소재결합 알고리즘에 대한 연구가 진행중이다. 본 고의 결과는 직접적으로 풍공학분야에 사용하기에는 아직 계산 시간의 효율성이나 해의 정확도 및 안정성면에서 무리가 있으나 추가적인 연구를 통하여 해석기법의 개선을 도모하고 컴퓨터 등 계산장비의 급속한 발전으로 장래에 경쟁력을 획득할 수 있을 것으로 기대된다.