• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.184-192
• /
• 1994

The parameters such as Richardson numbers or stability parameters are widely used to account for the extra straining effects due to three-dimensionality, curvature, rotation, swirl and others arising in paractical complex flows. Existing expressions for the extra strain in turbulence models such as $k-{\epsilon}$ models, however, do not satisfy the tensor invariant condition representing the coordinate indifference. In the present paper, considering the characteristics of both the mean strain rate and the mean vorticity, a new parameter to deal with the extra straining effects is proposed. The new parameter has a simple form and satisfies the tensor invariant condition. A semi-quantitative analysis between the present and previous parameters for several typical complex flows suggests that the newly proposed parameter is more general and adequate in representing the extra straining effects than the previous ad-hoc parameters.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.3
• /
• pp.165-172
• /
• 1999

A probability density function of reliability function is derived in this paper, by which the stability of armor units on the rubble-mound breakwater can be studied on the probabilistic approach. To obtain the distribution, each random variable of the reliability function is assumed to follow Gaussian distribution. The distribution function of reliability function is in agreement with the histogram simulated by the Monte-Carlo method. In addition, the failure probability of armor units on the rubble-mound breakwater evaluated by the derived probability density function is shown to have the same order of magnitude as those calculated by FMA and AFDA of moment method. In particular, it is important to note that random variables of the reliability function may be considered to be statistically independent in the reliability analysis of armor units on the rubble-mound breakwater. Therefore, the present approach may be straightforwardly applicable to all of the cases that any random variables in the reliability function are controlled by other distribution functions as well as normal distribution.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.58-63
• /
• 2007

본 연구는 관세행정 환경의 급격한 변화로 관세행정 기능의 사명별 중요도가 변화되고 행정방향도 주변분야까지 확대되었다. 이에 위험관리의 패러다임도 업무별 개인 차원의 적발과 단기성과 위주에서 지능적이고 정부 차원의 장기성과 위주로의 변화가 요청된다. 연구 결과를 요약하면 첫째로 관세행정의 위험관리에서의 변수간의 통계적 상관관계는 높게 나타났다. 둘째로 계획, 점검, 개선 단계의 변수만이 위험관리 성과인 만족도에 영향을 미치고, 집행단계는 영향을 주지 않는 것으로 나타났다. 셋째로 각 단계에서 조직성과에 긍정적인 영향을 미치는 변수는 계획단계는 안정성과 민주성 및 투명성이, 점검단계에서는 신속성과 정확성 및 합법성이, 개선단계에서는 혁신성과 교육성 및 홍보성이 위험관리 만족도에 영향을 주는 것으로 나타났다. 향후 관세행정에서 통합전략적 위험관리를 위해 첫째로 취약성은 최소화하고 강점을 강화키는 사전예방적 기능이 확보되어야 한다. 둘째로 위협사건 최소화와 적출기능이 확보되어야 한다. 셋째로 발생손실의 복구와 교정기능이 확보되어 고객을 감동시켜야 한다. 넷째, 변화에 대응하여 지속적으로 성장할 수 있는 기능이 확보되어야 한다.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.171-177
• /
• 2018

In 3D printing technologies, many parameters should be optimized for obtaining a part with higher quality. FDM (fused deposition modeling) printer has also diverse parameters to be optimized. Among them, it can be said that nozzle temperature and moving speed of nozzle are fundamental parameters. Thus, it should be preceded to know the optimal combination of the two parameters in the use of FDM 3D printer. In this paper, a new method is proposed to estimate the range of the stable combinations of the two parameters, based on the single line quality. The proposed method was verified by comparing the results between single line printing and multi-layered single line printing. Based on the comparison, it can be said that the proposed method is very meaningful in that it has a simple test approach and can be easily implemented. In addition, it is very helpful to provide the basic data for the optimization of process parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.4
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.179-188
• /
• 2002

This study is to understand the effect of the vibration and the stress changes due to the excavation of 2 arch parts of a tunnel, which is a Gyungbu Express Railway tunnel, on the tunnel itself and adjacent slopes in advance, and to analyze the stability. For the estimation of ground conditions, borehole tests, borehole camera logging and seismic logging were performed. Ground properties at a specific location were determined as input constants by performing 2 dimensional analyses with possible ranges of uncertain ground properties. Static and pseudo-static (due to blasting vibration) factors of safety were calculated. The behavior of the tunnel and its vicinity due to the tunnel excavation were predicted by 3 dimensional analyses. It was also tested whether the support system was proper.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.130-138
• /
• 1998

본 논문은 AUV의 수직면 운동제어를 수행하기 위하여 의사 슬라이딩 모드 제어기를 이용한 모델링 기법과 제어기 설계법에 관한 것으로서, 샘플링 간격이 길어지는 경우에도 시스템의 강인성이 확보되며 심도 제어가 안정적으로 수행되는 실용성을 실험과 수치 해석을 통하여 검증하였다. 제어기는 참고문헌에서 제안한 방법을 이용하였으며, 한국기계연구원 선박해양공학연구센터(KRISO)에서 개발한 VORAM호를 제어 대상 AUV로 선정하였다. PMM 시험으로 얻어진 운동 계수를 이용하여 수치 해석을 수행하였으며, KRISO의 장수조에서 실험을 수행하였다. 수치 해석과 실험 결과로부터 샘플링이 길어짐에 따라 의사 슬라이딩 모드 제어기는 연속계에 대한 슬라이딩 모드 제어기에서 발생하는 과도한 채터링 및 불안정성을 보이지 않았으며, 시스템의 안정성이 확보되고 불확실성에 대하여 강인한 제어 성능을 보였다. 또한, 본 논문에서는 수치 해석과 실험 결과를 근거로 의사 슬라이딩 모드 제어기의 설계를 위한 제어 변수의 선정 기준을 제시하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.780-787
• /
• 2003

Adaptive modulation is the method to increase the throughput of the mobile system using the power margin of the system design. In this paper, we propose the method to change adaptive modulation parameters for the stable system operation by monitoring the mobility of the mobile station. The proposed method measures the instanteneous mobility of the mobile station monitoring the closed power control data. The MPSK modulation method is used for the basic modulation method because of the hardware implementation. Using the proposed method we can get the more powerful throughput. By the system simulation to verify the evaluation of the proposed algorithm, we can notice the algorithm is more efficient than the typical method

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.75-82
• /
• 2005

Shear strength parameters obtained from field tests are important factors in the analysis of slope stability. In this paper, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was to estimate input parameters for sensitivity analysis in slope stability, and the limit equilibrium method was used to calculate the factor of safety of slope stability. A rock slope, failed in the field, was used for the sensitivity analysis of input parameters in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient (PCC) of input parameters from the sensitivity analysis, slope stability was dependant mainly on cohesion and slope angle. The effect of friction angle was smaller than those of cohesion and slope angle on slope stability.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.126-128
• /
• 2009

한국정부의 중소기업 정책을 분석하고 기업의 성과 분석을 통해 지원 정책의 유효성을 연구하였다. 중소기업의 지원 정책 과제를 창의와 혁신주도의 역동적인 중소기업군 육성, 기술경영혁신 활동 및 협력활동 강화, 자금 인력 판로 등 성장기반 구축 등 3가지로 분류한 후 기업의 성과(사업성과, 기술성과, 정책만족)와 비교하여 정책의 영향도를 측정하였다. 연구 결과 정부가 추진하는 중소기업 정책에 대한 기업의 성과의 특징은 자금 지원 분야였다. 전체 24개 측정 변수에서 연구 결과 중 가장 유의미한 변수로 선정된 5개 변수는 1)벤처,이노비즈,경영혁신형기업 육성, 2)지식기반서비스 육성자금 지원, 3)기술 연구개발 지원, 4)경영안정자금 지원, 5)공공부문의 중소기업 판로 지원이었다.