• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.135-142
• /
• 2023

The total arsenic and 6 arsenic species were investigated in 56 fish collagen products using ICP-MS (Inductively coupled plasma-mass spectrometer) and HPLC-ICP-MS(High performance liquid chromatography-Inductively coupled plasma-mass spectrometer). The mean concentrations of total arsenic and arsenic species were 40.103±81.133 ㎍/kg (N.D.~586.686) and 30.070±50.378 ㎍/kg (N.D.~313.871), respectively. The mean concentration of inorganic arsenic was 24.610±32.706 ㎍/kg (N.D.~129.331), and the As(V) (Arsenate) was the most dominant. The standards and specifications of arsenic have not been established for fish collagen products. Our study presents that arsenic levels are relatively safe compared with not only previous studies but also domestic and international standards. However, in one sample, the total arsenic concentration was 586.686 ㎍/kg, showing the inorganic was 8.119 ㎍/kg, and the DMA was 305.752 ㎍/kg, which was high than the Canadian standard for organic arsenic. In conclusion, it is necessary to monitor arsenic levels consistently and establish standards and specifications of arsenic in fish collagen products to assure consumer safety.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2013

Ten commercially available red pepper powders were investigated for their hygienic quality (total aerobic count, yeasts and molds, and coliforms) and physicochemical properties (moisture content, pH, Hunter's color values, American Spice Trade Association (ASTA) color and particle size). Microbial analysis resulted in $10^3-10^6$ CFU/g of total aerobic count and same of yeasts & molds, where 2 samples were positive ($10^3$ CFU/g) for coliforms. The moisture contents (7.25% to 12.73%) were with in the range as described in the Korean Food Standards Codex. Noteworthy variations were observed in pH (4.97 to 5.15), Hunter's ${\Delta}E$ values (47.19 to 58.04) and ASTA color values (89.31 to 98.61). Although the color differences were evident among the samples, but the Hunter values were not in good correlations with ASTA color values. The average particle sizes of the all samples were comparable ranging from $605{\mu}m$ to $1251{\mu}m$ with few exceptions. There was a great variation in the key quality attributes of commercially available red pepper powders that should be considered for their various uses in food products.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.5-12
• /
• 2012

Recently the installation of reinforced earth retaining walls in the domestic construction site has increased, surpassing conventional RC walls. These reinforced walls have various types depending on the reinforcing material, installation method and the form of face panel. However, there are difficulties in design and construction management due to the unproved safety of construction method. In case of reinforcing materials, despite the fact that they come in all different sizes and types produced by small businesses or partially imported with cheap price and low quality, no proper standards for designing the walls have been suggested. In order to apply reinforced retaining wall system to broad cases and design the walls effectively considering site conditions, specific design and construction guidelines for efficient construction management are needed. In conclusion, this study verified that reduction factors can be greatly affected by grain sizes and stiffness of backfill materials and granularity range, therefore in case of relatively large construction site, it is required to redesign the reinforced retaining wall by evaluating site installation resistance test, applying respective reduction factors to each backfill material and select the right geogrid depending on the usage of retaining wall so as to enhance the safety of reinforced earth retaining walls with efficiency.

• Journal of Food Hygiene and Safety
• /
• v.23 no.2
• /
• pp.137-141
• /
• 2008

To evaluate safety of commercial skate product, Korean traditional ready-to-eat raw-fish, during from June to August in 2006, microbial and chemical properties such as levels of total plate count, coliform, food-borne pathogens, VBN-value, pH and ammonium concentration in ready-to-eat skate product were evaluated. Total plate counts of ready-to-eat skate product were ranges from 4.8 to 7.5 log CFU/g, and coliform was detected in 1 sample (2.48 log CFU/g) among 18 samples. Staphylococcus aureus, was detected in 2 samples among 18 samples, but Escherichia coli, Salmonella, spp., Vibrio parahaemolyticus, and Listeria monocytogenes were not detected. VBN-values and pH of skate were ranges from 12.6 to 593.9 mg% and from 6.7 to 9.4 depending on strength of fermentation, respectively. Ammonium concentrations of fermented skate were ranges from 4.4 to 14.1 mg/g and 2 samples, pre-fermented skate, were not detected.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.128-133
• /
• 2005

Ash of Anadarac tegillarca granosa shell was used for preparation of calcium lactate and calcium citrate, and improvement of their purity was carried out by using ammonium chloride process (ACP) and ammonium nitrate process (ACP). Purity of calcium lactate and calcium citrate made by the reaction of ash of Anadarac tegillarca granosa shell with lactic acid solution and with citric acid solution was 94.35-96.72 and $87.58-93.06\%$, respectively. However, purity of calcium lactate and calcium citrate prepared with purified calcium carbonate pre-purified from the ash of Anadarac fegiliarca granosa shell using ACP and ANP method was 99.53-100.34 and $99.32-99.88\%$, respectively. The purity of these calcium products were higher than those of calcium lactate and calcium citrate made with ash of Anadarac tegillarca granosa shell. Whiteness of calcium lactate and calcium citrate prepared with purified calcium carbonate pre-purified using ACP and ANP method was 94.8-98.5 and 99.4-101.5, respectively. Whiteness of these calcium products was higher than that of calcium lactate (91.8) and calcium citrate (92.9) made with the ash of Anadarac tegillarca granosa shell. Therefore, we estimated that calcium lactate and calcium citrate prepared with purified calcium carbonate using ACP and ANP method could be used potentially as a food additive for calcium supplement.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.179-184
• /
• 2005

This study was carried out to evaluate the quality of confectioneries among processed foods. Total samples were 3,716, and violative samples among them were 36. The snacks in confectioneries showed violative rate of $1.0\%$, and the traditional snack in snacks showed $8.4\%$. Violative items were acid value and peroxide value for the most part, so the fried snacks need to control the management hygienically. The nutrition ingredients were measured far carbohydrates, protein, fats, sodium and calories in bread. Indication values at packing were not suited to 18 of 20 breads on the indication criterion of ingredient. And nutrition ingredients were not indicated to breads of some company nevertheless be sure to indicated. The processed food should be managed thorough with regard indicated nutrition ingredient.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.185-190
• /
• 2005

Perilla oil was measured on hygiene state and quality change for oil press condition. All sample .was commercially salted perilla oil, and was tested standard items. The result showed violative rate of $23.1\%$, and violative items were acid value and iodine value. Relationship between D.B.I. and iodine value was 0.78, so that unsuitability of iodine value should be caused of oxidation factor. But acid value was not relationship comparatively. The quality change appeared very small by roasting conditions, but quality of perilla seed gaye many influence on quality of oil. Therefore use of fresh perilla seed is a matter of great importance to quality of perilla oil. Perilla oil was demanded many attention on Quality management for stage and sold period because of high possibility of quality change.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.234-242
• /
• 2020

In this study, we monitored the raw materials in home-meal replacement (HMR) products, which have shown more than 63% growth in market size for two years. A total of 89 HMR products were purchased and the DNA barcodes of 112 raw materials in the product samples were analyzed. In order to identify the raw material species, a primer set specific for the 16S ribosomal RNA region of each raw material species was amplified. The amplicon was purified and sequenced, and then used to perform a BLAST search provided by the National Institutes of Health (NIH). The species of the raw material was determined by comparing the nucleotide sequences of the species registered in GenBank with identity and match score. Twenty-four species and three genera were identified from 112 raw materials. Three genera were identified at the genus level because a large number of species belonging to the same genus exist within 98% of the identity criteria. The results of the determination were compared with the available raw materials suggested in the Korea Food Code to determine the Korean name and availability of the foods. Six non-listed species were determined to be edible according to information provided by influential domestic and foreign organizations.

• Journal of Food Hygiene and Safety
• /
• v.1 no.1
• /
• pp.77-95
• /
• 1986

In 1962 the governing bodies of FAO and WHO approved the establishment of a joint FAO/WHO Food Standards Programme, the creation of a jointly sponsored body to be known as the Codex Alimentarius commission to implement the Programme. It can reasonably be claimed that the Commission has assumad the leading role in establishing internation food standards throughout the world. The Codex Committee of Food Hygiene has received much advice and assistance from other international organization which have been working in this field for a number of years. In particular, it has received valuable background documentation from the International Commission on Microbiological Specifications for Foods(ICMSF) which was set up by the International Association of Microbiological Societies(IAMS), and also from the International Organization for Standardization (ISO). Nevertheless, in spite of the information supplied by governments and research bodies in this field, microbiological standards have proved to be a highly controversial subject from the point of view of Codex standards. When it is decided to establish a microbiological standard for a food or class of foods, the following technical and administrative aspects must be considered: 1) The standard should be based on factual studies and serve one or more of the following objectives: (1) to determine the conditions of hygiene under which the food should be manufactured; (2) to minimize the hazards to public health; (3) to measure the keeping quality and storage potential of the food 2) The standard should be attainable under practicable operating and commercial conditions and should not entail the use of excessive heat treatment or the additions of extra preservatives. 3) The standard should be determined after investigation of the processing operation. 4) The standard should be as simple and inexpensive to administer as possible, the number of tests being kept to a minimum. 5) Details of methods to be used for sampling, examining and reporting should accompany all published microbiological standards. 6) In establishing tolerance levels for the permissible number of defective samples, allowance should be made for sampling and other variations due to differences in the laboratory methods. The following additional points should be kept in mind: 1) It is not satisfactory to establish one set of microbiological standards for a miscellaneous group of foods, such as“frozen foods”or“precooked foods”. 2) Microbiological standards should be applied first to the more hazardous types of food on the basis of experience of expected microbiological levels, taking into account variations in composition, processing procedures, and storage. 3) When a standard is established, there should be a definite relationship between the standard and the hazard against which it is meant to protect the public. 4) The sensitivity, reliability, and reproducibility of the sampling and analytical methods should be compared in different laboratories and the methods to be used should be specified in detail as part of the standard. 5) Tolerances should be included in the standard to account for inaccuracies of sampling and analysis. 6) Standards should be applied on a voluntary basis before compliance is made mandatory.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.257-267
• /
• 2007

The possibility of rapid non-destructive qualitative and quantitative analysis of vegetable oils such as perilla, com, soybean and rapaseed oils in sesame oils was evaluated. A calibration equation calculated by MPLS(Modified Partial Least Squares) regression technique was developed and coefficients of determination for perilla oil, com oil, soybean oil and rapaseed oil contents were 0.9992, 0.9694, 0.9795 and 0.9790 respectively. According to the data obtained from validation study, $R^2$ of contents of perilla, com, soybean, rapaseed oils were 0.997, 0.848, 0.957 and 0.968, and SEP of content of them 0.747, 5.069, 3.063 and 3.000 by MPLS respectively. The results indicate that the NIRS procedure can potentially be used as a non-destructive analysis method for the rapid and simple measurement of sesame oil mixed with other vegetable oils. The detection limits of the NIRS for perilla oil, com oil, soybean oil and rapaseed oil were presumed as 2%, $15{\sim}20%,\;15{\sim}20%$ and 10%, respectively.