• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.287-295
• /
• 2008

Rock slope has a variety of irregular discontinuities and represents a discontinuous mass. Rock joint plays an important role of control hydraulic and mechanic movements in the rock mass. These characteristics between hydraulic and mechanic movements at the rock joints could be represent difference. Therefore they are quiet important factor for slope design. In this study the weathered rock slopes were carried out to analysis of slope stability and geophysical survey. The electrical resistivity survey with dipole-dipole array conducted five profiling sites, and SWEDGE and SLIDE for slope stability analysis were applied on 20 rock slopes far assessment of slope stability and understand to geological situations due to the weathering.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.47-50
• /
• 2008

Streamer resistivity surveys in shallow marine environments were carried out to analyze sediment characteristics at the bottom of reservoir. Because the resistivity values of reservoir water are very low and those of sediment are relatively high, apparent resistivity values increase with depth. And it is necessary to eliminate the apparent resistivity data decreased highly when the number of separation increases. According to the repeated data processing, we proposed the resistivity ratio of upper-to-lower layer is $0.6{\sim}0.8$ because the RMS error of inversion leads to the minimum in these range. As a result of the inversion for two- and three-layer model, the inversion including water depth is proved to be more effective than conventional method.

• Geophysics and Geophysical Exploration
• /
• v.2 no.3
• /
• pp.142-148
• /
• 1999

Three-dimensional electromagnetic modeling algorithm in homogeneous half-space was developed using the extended Born approximation to an electric field integral equation. To examine the performance of the extended Born approximation algorithm, the results were compared with those of the full integral equation results. For a crosshole source-receiver configuration, the agreement between the integral equation and the extended Born approximation was remarkable when the source frequency is lower than 20 kHz and conductivity contrast lower than 1:10. Beyond this conductivity contrast, the simulated results by the extended Born approximation exhibit a difference with respect to those by the integral equation. Therefore, the limit of accuracy lies below contrast of 1:10 in the extended Born approximation. Since for the source frequency range from 20 kHz to 100 kHz, however, the difference is relatively small, the extended Born approximation could be used for a reasonable 3-D EM modeling algorithm.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.408-415
• /
• 1993

Systematic ab initio SCF calculations have been performed on the hydrogen-bonded dimers of fluoromethanes involving $CH_4,\;CH_3F,\;CH_2F_2\;and\;CHF_3$ with ammonia and water applying basis sets of 9s5p/5s and 9s5p1d/5p1d. Various ground state properties of these stable dimeric complexes have been evaluated. We compared these with corresponding properties of isolated monomers. We report equilibrium geometries, stabilization energies, dipole moments and force constants of intermolecular bonds. The effects arising as a consequence of the non-additive behavior of hydrogen bonding in chain-like oligomers are discussed. Systematic, methodical errors due to the use of the SCF approximation and the basis set dependence of the computed results are pointed out.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.240-257
• /
• 1999

More than 16 percent of the total 18,032 reservoirs over the country were reported to have leakage problems and need to be improved. Recently, a great deal of progress was made in geophysical survey techniques, particularly in electrical resistivity, and the techniques are used for variety of Purposes in groundwater and dam management due to its economical advantages. This document describes the re-evaluation of existing resistivity data including newly surveyed data, mapping of modeled value in 2-D analysis to locate seepage pathways, This contains also discussion results of more than eighteen years of professional experiences in the field of dam efficiency improvement. In comparison of surface resistivity data with several soil analysis data in laboratory, it is evident that the surface resistivity value shows a qualitative proportionality with the sand contents of the filling materials in earth dam. The result from the study also indicates that the SP method in subsurface investigation is effective to detect seepage in earth filled dam as well as piping through rock/earthfill dike.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.193-204
• /
• 2001

A geophysical survey was undertaken at Wiri area, Andong, to delineate subsurface structure and reveal the fault zone nearby which heaving of road and subsidence of slope occurred in 1997, especially in the heavy rainy season. Electrical resistivity methods of dipole-dipole array profiling and Schlumberger array sounding and seismic methods of refraction and reflection were performed for the mapping of clay layer, which was interpreted to be the major factor among the reasons of slope deformation. The clay layer was characterized by lower electrical resistivities (< $100{\Omega}{\cdot}m$) and lower seismic velocities (<400 m/s), respectively. The results of electrical and seismic surveys showed that subsidence of slope was probably associated with sliding of wet clay on 18SW/NNW trending fault plane, while heaving of road was probably caused by upward movement of the wet clay through subvertical NNE trending fault.

• Journal of the Korean Geophysical Society
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2002

Geophysical surveys(self-potential, electromagnetic, electrical resistivity, and seismic refraction methods) were performed to delineate the flow channel of leachate from a AMD (acid mine drainage) by correlating the anomalies to geochemical characteristics at an abandoned mine (Jangpoong mine). The geophysical responses attempted to be correlated with water sample analysis data(pH, EC, heavy metals, ${SO_4}^{-2}$). Electrical dipole-dipole resistivity sections represent the low-resistivity zone trending northwest, which indicates the leachate flow by AMD along the contact of the mine waste rock dump and the bedrock. From the overall points of geophysical and geochemical anomalies, it is summarized that the flow channel of leachate by AMD can be successfully imaged with composite interpretations on the geophysical and geochemical studies.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.525-539
• /
• 2020

A site containing buried solid waste and treated water and oil storage containers from a leather manufacturing plant was studied through soil and groundwater pollution and electrical resistivity surveys with the aim of identifying areas polluted by leachate generated by landfilling with leather waste and leakage wastewater. It was found that TPH and Zn exceeded environmental standards for soil pollution and, for leachate and groundwater, Cr(VI) concentrations exceeded standard levels for groundwater quality. An electrical resistivity survey was used to elucidate soil and groundwater pollution characteristics and diffusion pathways. Ten survey lines were set up with an electrode spacing of 5 m in a dipole-dipole array. The hydraulic characteristics of soil determined by groundwater contamination surveys matched well the low-resistivity-anomaly zones. Electrical resistivity surveys of areas containing contaminated soil and groundwater that have irregular strata due to waste reclamation are thus useful in highlighting vertical and horizontal pollutant diffusion pathways and in monitoring contaminated and potentially contaminated areas.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.37-55
• /
• 1997

최근 선진국가들에서는 전자파 장애 증후군에 관심이 집중되고 있는데, 전자파에 장기 노출 되는 인구에서 뇌암이나 유방암, 백혈병 등의 발생률이 높다는 보고(Kolmodin-Hedman 등, 1988 ; Demers등, 1991)가 있어서 전자제품의 생산업체는 물론이고 사용자에 대해서도 불안한 관심사가 되 어 있다. 전자파가 생체에 미치는 영향은 열적 효과와 비열적 효과에 의한 것으로 구분된다. Microwave는 약 300MHz에서 300GHz 사이(파장 1m에서 1mm사이)의 주파수를 가지는 전자파로서 이온의 운동이나 쌍극자분자(dipole molecule)들을 진동시키므로서 조직에 열이 발생한다. 열이 과도하게 발생하면 세포 단백질이 응고하게 되는 등 일반적으로 생각할 수 있는 고열로 인한 여러 가지 유해환경이 조직 에 조성될 수 있다. 실제로 고전압의 전자파에 노출된 안구의 수정체에 백내장 등의 병변이 발생한 것 으로 보고된 바 있다(Adey,1981). 일반적으로 전자파의 생체에 대한 작용으로는 이렇듯 조직에 흡수 되는 전자파의 에너지에 의한 열작용이 지배적인 것으로 생각되어 왔다. 그러나 초저주파역대(Extre- mely low frequency, EMF)의 변조 및 펄스파 등의 영향에 관해서도 조직의 온도상승으로는 설명할 수 없는 현상이 보고된 바 있다. 이러한 비열적 효과가 신경계에 끼치는 영향에 대해서는 혈액뇌관문 의 투과성 변화(Oscar와 Hawkins, 1977), 뇌종양 발생, 칼슘대사 이상 및 신경전달물질에 대한 영향 등이 주장(Anderson, 1993)되고 있으나 아직 그 분명한 기전이 밝혀져 있지 않은 상태이다. 또한 그 영향의 평가에 서도 일정한 기준이나 지표가 정해지지 않은 실정이다. 그러므로 신경계에 대한 대체적인 소개와 더불어 전자기파의 영향에 대한 이제까지의 보고를 종합 하고 향후 연구의 방향을 소개하고자 한다.> 이온이 공동 첨가제로 더 적합하다.u(30 .angs. )/CoFe(35 .angs. )/NiO(800 .angs. ) 구조를 갖는 spin-valve 박막은 극대 MR비 6.3%, 유효자기장감응도 약 0.5(%/Oe)를 보여 spin-valve head 재료로 적합함을 알 수 있었다.다.다.다.는 각각 148 meV .angs. $^{2}$, 103.8 meV .angs. $^{2}$와 1.77 * $10^{-6}$ erg/cm, 0.67 * $10^{-6}$ erg/cm 였다.다.자 노인들을 영주권자와 귀화 시민권자의 구분없이 하나의 집단으로 간주하고 분석해 왔던 것을 볼 때, 앞으로의 연구는 이론적으로나 방법론적으로 시민권의 유무가 주거형태에 끼치는 영향도 함께 고려해야 할 것이다.에 나타난 인도의 영향은 여성복식과 남성복식에 있어서 서로 유사점과 차이점이 보이는데, 인도의 영향이 여성복식에 있어서 그 빈도가 더 높고, 종류가 더 다양함을 볼 수 있다. 여성복식에 있어서는 12가지의 다양한 인도복식스타일이 나타났으며, 그중 가장 많이 보이는 스타일은 Indian Shirt/Blouse/Smock/ Dress이며, 그 뒤를 이어 Madras, Indian lowery등을 볼 수 있다. 남성복식애 나타난 7가지의 스타일 중에는 Madras가 가장 빈도가 높으며 그외의 스타일들은 그 빈도가 매우 낮음을 볼 수 있다. 인도의 영향의 정도 (Attribution Categories) 있어서는 여성과 남성복식 모두에 있어서 인도에서 직접 수입된(originated) item이 각각 전체의 90%와 81%를 차지하여, 인도복식의 영향은 받았으나 미국내에서 제작된(attributed and connotated) item 보다 휠씬 더 많은 수를 보였다. 인도복식스타일이 가장