• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1387-1394
• /
• 2011

In this paper, a low-area symbol timing offset synchronization structure for WLAN Modem is proposed. Using CSD(Canonic Signed Digit) coefficients and CSS(Common Sub-expression Sharing) technique for the filter implementation, efficient structure for multiplication block can be obtained. Function simulation for proposed structure is done by using the preamble with timing offset. Through Verilog-HDL coding and synthesis, it is shown that the proposed symbol timing offset synchronization structure can be implemented with low-area semiconductor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1836-1842
• /
• 2000

이 논문은 레일레이 감쇄 채널 환경에서 IMT-2000 파일럿 심볼 구조의 W-CDMA 시스템 역방향 링크의 채널 추정에 관한 LMS 적용형 알고리즘 성능을 WMSA(Weighted Multi-Slot Averaging)(K=1,2,3), 일정 추정이득 (Constant estimation gain) 및 RLS 알고리즘 성능과 비교 분석하였다. 이 논문의 모형은 IMT-2000 3GPP 규격의 W-CDMA 채널 구조, 변조 및 파일럿 패턴을 이용하였다. 파일럿 심볼 위치의 채널추정은 LMS 알고리즘을 이용하고 데이터 심볼 위치의 채널보상은 선형 보간으로 수행하였다. 저속 도플러 주파수에서는 WMSA(K=1,2,3) 성능이 일정 추정이득, RLS 및 LMS 적응형 알고리즘 성능보다 우수하며, WMSA(K=1) 성능의 경우 일정 추정이득, RLS 및 LMS 적응형 알고리듬 성능과는 큰 차이가 없다. 그리고 LMS 알고리즘 성능은 WMSA(K=1) 성능과 매우 비슷한 결과를 얻었다. 그러나 도플러 주파수가 고속화될수록 LMS 알고리즘의 성능이 WMSA(K=1), 일정 추정이득 및 RLS 알고리즘 성능보다 우수함을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.103-110
• /
• 2005

The performance of maximum likelihood(ML) detection for the given channel is analyzed in spatially multiplexed MIMO system. In order to obtain the vector symbol error rate, we define error vectors which represent the geometrical relation between lattice points. The properties of error vectors are analyzed to show that all lattice points in infinite lattice almost surely have four nearest neighbors after random channel transformation. Using this information and minimum distance obtained by the modified sphere decoding algorithm, we formulate the analytical performance of vector symbol error over the given channel. To verify the result, we simulate ML performance over various random channel which are classified into three categories: unitary channel, dense channel, and sparse channel. From the simulation results, it is verified that the derived analytical result gives a good approximation about the performance of ML detector over the all random MIMO channels.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.77-86
• /
• 2007

These days, universities are establishing new image; UI(University Identity) for them because of rapid change of education environment in 21st century, The objective of UI is expressing university's image externally and unifying members internally. In the process of establishing university's image, Symbol mark plays a key role in differentiating other universities because of its visual effect as well as enhancing self-confidence. In this study, I suggest that symbol mark is an important brand asset in point of differentiation and identification and analyze 36 domestic universities' symbol mark designs. In the way of this analysis, I classified these symbol marks in the aspect of shapes and colors and studied current design along with character of each symbol marks by examining usage of emblem. Therefore this paper will be used as a basic reference to understand domestic universities' symbol mark trend and to establishing differentiating strategy in the future.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.49-55
• /
• 2020

Information theoretic learning (ITL) methods based on random symbols (RS) use a set of random symbols generated according to a target distribution and are designed nonparametrically to minimize the cost function of the Euclidian distance between the target distribution and the input distribution. One drawback of the learning method is that it can not utilize the input power statistics by employing a constant stepsize for updating the algorithm. In this paper, it is revealed that firstly, information potential input (IPI) plays a role of input in the cost function-derivative related with information potential output (IPO) and secondly, input itself does in the derivative related with information potential error (IPE). Based on these observations, it is proposed to normalize the step-size with the statistically varying power of the two different inputs, IPI and input itself. The proposed algorithm in an communication environment of impulsive noise and multipath fading shows that the performance of mean squared error (MSE) is lower by 4dB, and convergence speed is 2 times faster than the conventional methods without step-size normalization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2100-2112
• /
• 2011

An orthogonal code hopping multiplexing (OCHM) technique has been proposed for accommodating a large number of users with low channel activities than the number of orthogonal codewords through statistical multiplexing in downlink cellular systems. In this paper, a multiple input multiple output (MIMO) antenna based OCHM system is proposed to improve the performance. Each modulated symbol is repeated N times and the N repeated symbols are transmitted simultaneously using N transmit antennas. Through repetitions, the effect of perforations that the OCHM system experiences is decentralized among the repeated symbols and the full perforation probability is significantly reduced. Each receiver detect the transmitted signal using its pre-assigned code hopping pattern. Simulation results show that the proposed scheme saves the required energy for a given frame error rate (FER).

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.30-35
• /
• 2011

In this paper, we propose a method to improve the performance of initial channel estimation (CE) for the multiband-OFDM (MB-OFDM) UWB. The performance of the initial CE can be generally improved as increasing the number of the used preamble symbols. The MB-OFDM specification presents two CE symbols per band in preamble format. The performance of CE estimation with two CE symbols may be satisfied in relatively high sensitivity -77.5 and -72.5 dBm for 200 Mbps and 480 Mbps data rate, respectively, but can not be enough in the degraded 55 Mbps and 110 Mbps sensitivities such as -83.5 and -80.5 dBm, respectively. A method proposed in this paper achieves the performance improvement by extending CE estimation region to packet synchronization (PS) symbols and frame synchronization (FS) symbols including two CE symbols. This can improve the CE performance in the degraded SNR and increase the link-margin by reducing the error rate in physical-layer header. The link-margin improvement obtained by the proposed CE preamble can induce the decrease of error-rate in physical-layer header and increase of communication throughput. Simulation results for the proposed initial method show that the performance is improved by about 0.7 dB at 10-4 bit-error-rate using '4' symbols than initial method using only two CE symbols.

• KSCI Review
• /
• v.2 no.2
• /
• pp.77-82
• /
• 1996

도로 정보 시스템은 현재 경찰서 등의 국가 공공 기관 등에서 사용중이며 점차적으로 수도국이나 전기, 전화 등의 사회 공익 단체에서도 사용되어질 전망이다. 본 논문은 도로 정보 시스템의 기본 데이터와 시스템을 이용하여 도로관리에 필수적인 도로 단면도를 생성하기 위한 도로 단면도의 전체적인 디스플레이 구성과 관로나 맨홀 등 지하 매설물의 표현 방법, 각 매설물이 갖고 있는 수치 표현 방법, 각 매설물을 화면에 표현하기 위한 심볼화 작업을 통한 단면도 생성 방법을 제시한다. 또한 매설물의 속성 데이타 표현 방법을 포함하여 도로 단면도 생성에 의한 기대 효과를 고찰한다.

• The Magazine of the IEIE
• /
• v.11 no.1
• /
• pp.34-38
• /
• 1984

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.266-273
• /
• 2016

In this paper, we propose the signal processing techniques for the command link receiver mounted to aircrafts flying at a high speed. In order to acquire the various information transmitted from ground through radio frequency links, the wide received signal range must be guaranteed as well as the carrier synchronization and symbol synchronization be performed correctly within short pulse sections. After the synchronization step, we should be able to achieve theoretical performance of the modulation and demodulation scheme applied as deciding bit and symbol at the time appointed. By test results, we make sure that the proposed signal processing techniques can be effectively applied command link receiver mounted to aircrafts.