• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.181-191
• /
• 2000

This experiment was conducted to find out the effects of mushroom cultivation on ozone susceptibility. The mushroom media in cultivation became softening well without bad Knell when it was soaked for 120 hours. The mushroom media softening on cultivating of oyster mushroom was good and fast when the concentration of gas condition ozone is high. The concentration of gas condition ozone must control at less than 0.02 ppm at the innoculation room, 0.03 ppm at the incubating room, must not use at the sprouting mom, less than 0.02 ppm at the growing room respectively. Also at the growing room, it removes the smell of mushroom, so has a protective effects of coming into mushroom fees and disease. When the concentration of 0.02 ppm liquid condition ozone was sprinkled, it was very useful in disease protection If it was input, the storage period of mushroom fruiting body was prolonged.

• Archives of design research
• /
• v.14
• /
• pp.1-7
• /
• 1996

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of refrigerator. EMG was measured to evaluate the load of users lumbar muscle. Based upon the experimental EMG data, we developed a model to estimate the relative load corresponding to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R styles, were compared with the model. A three-dimensional motion analysis method was used to evaluate the users motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the users arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we suggested several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of refrigerators

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.94-98
• /
• 2011

Purpose: The radiation exposure from radioisotope at the hands and foots of radiation workers who works in PET/CT part at the department of nuclear medicine was investigated in this study. Materials and Methods: From 4th August 2010 to 14th January 2011, 6 radio-technologists' radiation on hands and feet were measured. All radio-technologist have been examined around 8; morning, 12; afternoon, and 16 o'clock; evening, respectively. SPSS version 17 was used for statistical analysis. Results: The statistical significances were calculated in several ways. The radiation from both hands and feet in the Morning was lower than Afternoon and Evening. In some cases, the detected radiation showed extremely high values in data. In order to find the effect of the ${\gamma}$-ray on the hand, the estimated doses were presumably calculated, however, the exposure dose on feet were unmeasured. Conclusion: Even if the radiation exposure from the radioisotope at the hands and feet were under the limitations, it is definitely needs to prevent the radiation-contamination. Therefore, the radio-technologists need to have a proper radiation-dealing-procedure of their own, and must try to prevent a radiation exposure by themselves.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.35-39
• /
• 2009

Purpose: Diagnostic and functional imaging softwares in Nuclear Medicine have been developed significantly. But, there are some limitations which like take a lot of time. In this article, we introduced that the basic concept of macro to help understanding macro and its application to Brain SPECT processing. We adopted macro software to SPM processing and PACS verify processing of Brain SPECT processing. Materials and Methods: In Brain SPECT, we choose SPM processing and two PACS works which have large portion of a work. SPM is the software package to analyze neuroimaging data. And purpose of SPM is quantitative analysis between groups. Results are made by complicated process such as realignment, normalization, smoothing and mapping. We made this process to be more simple by using macro program. After sending image to PACS, we directly input coordinates of mouse using simple macro program for processes of color mapping, adjustment of gray scale, copy, cut and match. So we compared time for making result by hand with making result by macro program. Finally, we got results by applying times to number of studies in 2007. Results: In 2007, the number of SPM studies were 115 and the number of PACS studies were 834 according to Diamox study. It was taken 10 to 15 minutes for SPM work by hand according to expertness and 5 minutes and a half was uniformly needed using Macro. After applying needed time to the number of studies, we calculated an average time per a year. When using SPM work by hand according to expertness, 1150 to 1725 minutes (19 to 29 hours) were needed and 632 seconds (11 hours) were needed for using Macro. When using PACS work by hand, 2 to 3 minutes were needed and for using Macro, 45 seconds were needed. After applying theses time to the number of studies, when working by hand, 1668 to 2502 minutes (28 to 42 hours) were needed and for using Macro, 625 minutes (10 hours) were needed. Following by these results, it was shown that 1043 to 1877 (17 to 31 hours were saved. Therefore, we could save 45 to 63% for SPM, 62 to 75% for PACS work and 55 to 70% for total brain SPECT processing in 2007. Conclusions: On the basis of the number of studies, there was significant time saved when we applied Macro to brain SPECT processing and also it was shown that even though work is taken a little time, there is a possibility to save lots of time according to the number of studies. It gives time on technologist's side which makes radiological technologist more concentrate for patients and reduce probability of mistake. Appling Macro to brain SPECT processing helps for both of radiological technologists and patients and contribute to improve quality of hospital service.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.149-158
• /
• 2008

The purpose of this study was to determine the effect of milking system type on milking center effluent production through the four seasons. Four different types of milking systems (Bucket, Pipeline, Tandem and Herringbone) were estimated, in duplicate, through the different seasons. The following conclusions can be drawn from this study. 1. The quantity of wastewater produced from Tandem and Herringbone milking systems were significantly larger than Bucket milking system (p<0.05). 2. The main wastewater production was from the washing of milking apparatus. Tandem and Herringbone milking systems produced 398.8 and $407.7{\ell}$/day of wastewater, respectively, for apparatus washing. These values were significantly higher than the other milking systems during the summer (p<0.05). 3. The average wastewater production from the various milking systems was $15.4{\ell}$/head/day. The quantity of wastewater production during summer ($16.4{\ell}$/head/day) season was higher than of the other seasons. 4. The highest level of $BOD_5$ ($906.4mg/\ell$) was produced from the washing of the parlor floor and the lowest level of $BOD_5$ ($212.4mg/\ell$) was produced from the washing of the udders of the cows. 5. The pH of dairy wastewater was in the range of $7.3{\sim}8.2$ and the average levels of $BOD_5$, COD, SS, T-N, and T-P were 731.2, 479.0, 751.6, 79.1, $14.7mg/\ell$, respectively. Following conclusions can be drawn from this experiment. The quantities of wastewater production from Bucket, Pipeline, Tandem and Herringbone milking system were 143.9, 487.9, 914.0, and $856.7{\ell}$, respectively. The average wastewater produced from the milking systems was $15.4{\ell}$/head per day. In order to effectively manage on the wastewater from milking systems, dairy farms need to consider the milking system type and farm size when determining the optimum wastewater treatment system.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.50-56
• /
• 2012

Purpose: Those who access to the nuclear medicine department are classified as radiation workers, temporarily access group, and occasional access group as defined by the atomic energy law. The radiation workers and temporarily access people wear a personal radiation dosimeter for checking their own radiation absorbed dose periodically. However, because of the sanitation workers, classified as temporarily access group, who are working in the nuclear medicine department are moved in a cycle with other departments and their works are changeful, it is hard to control their radiation absorbed dose. Thus, this study is going to examine the state of the sanitation worker's radiation absorbed dose, and then make sure whether they are classified as temporarily access group or not. Materials and methods: In the first instance, the first sanitation worker who works in vitro laboratory and PET room and the second sanitation worker who works in gamma camera rooms (invivo room) wore radiation dosimeter-OSL(Optically Stimulated Luminescence)- to measure their own radiation absorbed dose during work time from May to June 2011. Secondly, this study was taken place 5 places in gamma camera rooms, 2 places in PET bed room, operating room, waiting room and cyclotron room in PET and 4 places in vitro laboratory. And then to measure the radiation space dose rate, it is measured 10 times each of places as sanitation worker's work flow by using radiation survey meter. Results: The radiation absorbed dose on OSL of the first c who works in vitro laboratory and PET room and the second one who works in gamma camera rooms are 0.04, 0.02 mSv per month respectively. That means the estimated annual radiation absorbed doses are less than 1mSv as 0.48, 0.24 mSv/yr respectively. The radiation space dose rates as sanitation worker's work flow using survey meter are 0.0037, 0.0019 mSv/day, so the estimated annual radiation absorbed dose are 0.93, 0.47 mSv/yr respectively. The weighted exposure dose of first sanitation worker of each places are 1.62% in cyclotron room, 3.88% in waiting room, 2.39% in operating room, 81.01% in bed room of PET and 11.01% in vitro laboratory. The weighted exposure dose of second sanitation worker of each places are 45.22% in radiopharmaceutical laboratory, gamma 30.64% in camera rooms, 15.65% in waiting room, 8.49% in reading room. Conclusion: The annual radiation absorbed doses on OSL of both sanitation workers are less than 1 mSv per year and the annual radiation absorbed doses by using survey meter are less than 1mSv either, but close up to 1 mSv. Thus, to clarify whether the sanitation workers are temporarily access group or not, and to be lessen their s radiation absorbed dose, they should be educated about management of radiation and modified their work flow or work time appropriately, their radiation absorbed dose would be lessen certainly.

• Journal of KIISE:Software and Applications
• /
• v.27 no.6
• /
• pp.642-650
• /
• 2000

The pilot (human actor) involved in the control loop of the highly automated aircraft systems (machine actor) must be able to monitor these systems just as the machine actor must also be able to monitor the human actor. For its safety and better performance of the human machine system, each of the two elements must be knowledgeable about the other's intentions or goals. In fact, several recent accidents occurred due to goal conflicts between human and machines in a modern avionic system. To facilitate the coordination of these actors, a computational aid was developed. The aid, which operates in a part-task simulator environment, attempts to facilitate the management of the goals and functions being performed to accomplish them. To provide an accurate knowledge of both actors' goals and their function statuses, the aid uses agent-based objects representing the elements of the cockpit operations. This paper describes the development of the flightdeck goals and functions called Agenda Management.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.310-315
• /
• 2015

Purpose: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. Materials and Methods: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. Results: The mean tightening torque of implant screw in dental laboratory was $1.563{\pm}0.332Ncm$. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. Conclusion: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.

• Korean Journal of Occupational Health Nursing
• /
• v.2
• /
• pp.13-25
• /
• 1992

본 연구는 업종별 산업간호사의 보건관리업무의 내용과 수행정도를 측정하고 업종별 보건관리업무 수행정도를 비교 분석코저 한다. 연구방법은 산업간호사회에 등록된 산업장중 서울, 인천, 마산, 창원, 부산, 울산 지역에 있는 130개 산업장을 임의로 선정하여 산업간호사를 대상으로 설문조사하였다. 자료분석은 반도와 백분율, 업종간의 보건관리업무 내용별 수행정도는 일원분산분석과 다중검증 비교로 유의성을 검증하였다. 연구결과는 다음과 같다. 1) 업종별로 산업간호사의 업무수행에 유의한 차이를 보인 보건관리내용은 서비스업에 있어서 근로자의 건강사정에 대한 수행정도가 제조업과 기타제조업에서 보다 높게 나타났다.(F=4.23, P=.0167) 반면에 근로자의 건강진단과 계속관리, 작업환경 관리업무 수행정도는 제조업과 기타제조업에서 서비스업보다 높게 나타났다.(F=9.78, P=.0001 ; F=5.366. P=.005) 2) 업종간에 유의한 차이가 없는 보건관리내용은 산업장진단 또는 건강문제분석, 보건교육, 통상증상에 대한 투약, 기록과 보고, 건강관리실 운영 등이었으며 업무수행정도는 가끔 또는 필요시하는 정도로 나타났다. 반면에 조사, 연구 참여에 대한 수행정도는 세 업종 모두 가장 낮은 것으로 나타났다. 이러한 연구결과들은 산업장 간호사의 신규교육이나 직무교육과정운영이 업종별로 운영되어야 함을 시사해 준다고 볼 수 있으며 또한 산업간호사의 직무 중 보건 교육, 통상질환에 대한 투약, 기록 및 보고, 건강관리실운영등은 업종간에 유의한 차이가 없으나, 수행정도는 낮은것으로 나타나 이에 대한 실제적인 직무교육이 강화되어야 할 것으로 생각된다. 특히 보건교육도 업종별로 차이가 있으므로 다양한 보건교육교재의 개발이 필요하다고 생각된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.129-134
• /
• 2011

The construction method in electrical room with hydro power generation is well informed in drawings and according to this method, to master the actual working conditions. It's necessary to consult location of KEPCO liability threshold with the KEPCO side, therefore make a decision to install the underground cable in hydro power station in each state, including outdoor pipes and manholes. Undulating rigid polyethylene conduit (125C) and CNCV-W extra high cable are laid and installed, to make a closely analysis to the construction by reviewing its process. In this work, the key part of the KEPCO power system for House of Commons is actually based on liability threshold, even including outdoors pipeline construction, high voltage underground electrical wiring and switchgear installation. It directly reveals the contents of the proposed construction methods about Housing Corporation and the High Voltage Switchgear Installation Inlet.