• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.935-940
• /
• 2023

Digital-twin technology is emerging as an innovative solution for all industries, including manufacturing and production lines. Therefore, this paper optimizes all the energy used in a biomass plant based on unused resources. We will then implement a digital-twin prototype for biomass plants and evaluate its performance in order to improve the efficiency of plant operations. The proposed digital-twin prototype applies a standard communication platform between the framework and the gateway and is implemented to enable real-time collaboration. and, define the message sequence between the client server and the gateway. Therefore, an interface is implemented to enable communication with the host server. In order to verify the performance of the proposed prototype, we set up a virtual environment to collect data from the server and perform a data collection evaluation. As a result, it was confirmed that the proposed framework can contribute to energy optimization and improvement of operational efficiency when applied to biomass plants.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.206-212
• /
• 2024

Purpose: This study conducted research on the sharing of information to enhance the survival rate of emergency patients by swiftly transferring them to appropriate hospitals through sharing the patients' conditions, treatment histories, and transportation information with the Maritime Police Agency and relevant agencies when emergencies occur in the marine environment. Methods: In this study, emergency patient information classified in a smartphone app was received, stored, and transmitted using the LoRa communication method by electronic triage tags, and the transmitted emergency patient information was implemented to be collected in real-time through a hybrid triage system along with LoRa receivers. Results: Through the hybrid triage system, it was possible to receive emergency patient information according to the distance or confirm delayed reception. It was observed that most data were received when the distance was short, while data reception was unsuccessful in relatively longer distances. Conclusion: It was confirmed that in mass disaster environments where internet communication is impossible, rapid and accurate understanding of casualty information at disaster sites and appropriate disaster responses can be achieved using self-networking methods such as LoRa communication. However, limitations inherent in communication methods were also recognized. Further research on various communication methods is required to collect emergency patient information and transfer them to appropriate hospitals in situations where internet communication is unavailable.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2008

Ubiquitous health care system, which is one of the developing solution technologies of IT, BT and NT, could give us new medical environments in future. Implementing health information systems can be complex, expensive and frustrating. Healthcare professionals seeking to acquire or upgrade systems do not have a convenient, reliable way of specifying a level of adherence to communication standards sufficient to achieve truly efficient interoperability. Great progress has been made in establishing such standards-DICOM, IHE and HL7, notably, are now highly advanced. IHE has defined a common framework to deliver the basic interoperability needed for local and regional health information networks. It has developed a foundational set of standards-based integration profiles for information exchange with three interrelated efforts. HL7 is one of several ANSI-accredited Standards Developing Organizations operating in the healthcare arena. Most SDOs produce standards (protocols) for a particular healthcare domain such as pharmacy, medical devices, imaging or insurance transactions. HL7's domain is clinical and administrative data. HL7 is an international community of healthcare subject matter experts and information scientists collaborating to create standards for the exchange, management and integration of electronic healthcare information. The ASTM specification for Continuity of Care Record was developed by subcommittee E31.28 on electronic health records, which includes clinicians, provider institutions, administrators, patient advocates, vendors, and health industry. In this paper, there are suggestions that provide a test bed, demonstration and specification of how standards such a IHE, HL7, ASTM can be used to provide an integrated environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.864-868
• /
• 2006

댐과 양쪽의 산 능선에 감싸이어 있는 저수지의 모습은 이렇다할만한 특징을 찾아보기가 쉽지 않다. 우리나라의 각지에 건설되어진 다목적댐으로 인해 형성되어진 저수지들을 둘러보아도, 역시 주변의 지형을 자세히 비교해 보기 전에는 구별하기 힘들만큼, 그만큼 외관상으로는 닮아있다. 하지만, 이러한 저수지들이 보여주는 자연현상은 실제로는 너무나도 다양하다. 잔잔한 물 표면의 안쪽에 저마다 눈에 보이지 않는 특성들을 감추고 있으리라 추측해 본다. 하지만, 그 특성을 정량적으로 파악 하기란 좀처럼 쉽지가 않다. 영양염분의 과다 유입으로 부영양화가 초래되면 여기저기서 녹조를 발생 시키고, 또한 홍수나 상류 유역의 토사 붕괴로 인하여 좀처럼 침강되지 않는 미세 입자가 과다 유입되면, 1년 내내 누런 탁수로 몸살을 앓는다. 이처럼, 인간의 눈에 보여 지는 저수지는 '매우 닮은 모습에서 너무나 다른 모습'으로 '계단의 층계변화'와 같은 극단적인 상태 변화만이 파악되어진다. 최근에 들어서, 장비의 발달과 환경에 대한 관심의 고조로 한 달에 한번 많으면 일주일에 한 번씩 현장 조사를 수행하고는 있지만, 지속적으로 저수지를 파악하기 위한 '선형적인 현상'을 보여주기에는 충분하지가 않다. 본 연구에서는, 저수지 수온을 모니터링 함으로서, 홍수와 가뭄과 같은 이벤트 및 계절 변화로 인한 수체의 온도분포를 조사 하였다. 그 방법으로, 자체 개발한 써미스터체인을 용담호의 댐축 지점과 댐축으로부터 상류방향으로 6.6km 떨어진 유입지점의 두 곳에 설치하였으며, 연 중 10분 간격으로 수온데이터를 로거에 저장한 후, 두 달에 한번 정도로 센서 정비 및 데이터 수거를 실시하였다. 그 결과, 우리가 눈으로나 현지관측만으로는 파악할 수 없었던 수체내의 많은 특징을 파악 할 수 있었다.. 중랑천 유역의 소배수구역을 대상으로 연중 발생하는 큰 호우사상에 대해 임의의 강우관측소를 결측지점으로 가정하고 주변의 강우관측소로부터 각각의 방법을 이용해 가중치들을 산정하여 결측지점의 강우량 값을 보정하고자 하였다. 또한 각각의 방법을 이용하여 얻어진 결과에 대해 실측값과 보정값의 오차정도를 평균절대오차법(Mean Absolute Error)과 제곱평균제곱근오차법(Root Mean Squared Error)에 의해 산정하여 보정 방법간의 효율성을 검토하고자 하였다.9년, 그리고 2010년${\sim}$2019년까지 총 4구간으로 나누어 결과를 도출하였으며 예상한 바와 같이 후반기 20년 동안에 세 가지 지표가 취약해 지는 것을 확인할 수 있었고, 특히 2000년부터 2009년까지 10년 동안에는 더욱 취약해짐을 확인할 수 있었다.를 보임에 따라 그 정책적 효과는 때로 역기능적인 결과로 초래하였다. 그럼에도 불구하고 이 연구결과를 통하여 최소한 주식시장(株式市場)에서 위탁증거금제도는 그 제도적 의의가 여전히 있다는 사실이 확인되었다. 또한 우리나라 주식시장에서 통상 과열투기 행위가 빈번히 일어나 주식시장을 교란시킴으로써 건전한 투자풍토조성에 저해된다는 저간의 우려가 매우 커왔으나 표본 기간동안에 대하여 실증분석을 한 결과 주식시장 전체적으로 볼 때 주가변동율(株價變動率), 특히 초과주가변동율(超過株價變動率)에 미치는 영향이 그다지 심각한 정도는 아니었으며 오히려 우리나라의 주식시장은 미국시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.262-269
• /
• 2020

Recently, many attempts have been made to reduce the time required for payment in various shopping environments. In addition, for the Fourth Industrial Revolution era, artificial intelligence is advancing, and Internet of Things (IoT) devices are becoming more compact and cheaper. So, by integrating these two technologies, access to building an unmanned environment to save people time has become easier. In this paper, we propose a smart shopping cart system based on low-cost IoT equipment and deep-learning object-detection technology. The proposed smart cart system consists of a camera for real-time product detection, an ultrasonic sensor that acts as a trigger, a weight sensor to determine whether a product is put into or taken out of the shopping cart, an application for smartphones that provides a user interface for a virtual shopping cart, and a deep learning server where learned product data are stored. Communication between each module is through Transmission Control Protocol/Internet Protocol, a Hypertext Transmission Protocol network, a You Only Look Once darknet library, and an object detection system used by the server to recognize products. The user can check a list of items put into the smart cart via the smartphone app, and can automatically pay for them. The smart cart system proposed in this paper can be applied to unmanned stores with high cost-effectiveness.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.208-214
• /
• 2020

In this study, we have developed a drone magnetic exploration system (proto-type) using a fluxgate magnetic sensor. Hardware of the system consists of a fluxgate magnetometer, an inertial measurement unit (IMU), a GPS, and a communication module. And we have developed monitoring software, which enables it to transmit the measured data to the ground control system (GCS) in real time. The measured magnetic data are finally saved as 1 Hz data after passing through a notch filter and a band-pass filter. For verification of this system, a preliminary test was conducted to check the magnetic responses of a magnetic object first, then the field test was carried out in two iron mines. We tested the developed system on the field test in Pocheon, Gyeonggi and Jeongseon, Gangwon. The magnetic data from the developed drone system was very similar to those from unmanned airship system developed by Korea Institute of Geoscience and Mineral Resources (KIGAM). As a result, preliminary experiment and field test have demonstrated that this system is applicable for outdoor aeromagnetic exploration. It requires more studies to improve filter function and instrument performance to minimize noise in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.66-75
• /
• 2016

Due to aggressive scaling of device sizes and reduced noise margins, physical defects caused by aging and process variation are continuously increasing. Additionally, with scaling limitation of metal wire and the increasing of communication volume, fault tolerant method in manycore network-on-chip (NoC) has been actively researched. However, there are few researches investigating reliability in NoC with voltage-frequency-island (VFI) regime. In this paper, we propose a table-based routing technique that can communicate, even if link failures occur in the VFI NoC. The output port is alternatively selected between best and the detour routing path in order to improve reliability with minimized hardware cost. Experimental results show that the proposed method achieves full coverage within 1% faulty links. Compared to $d^2$-LBDR that also considers a routing method for searching a detour path in real time, the proposed method, on average, produces 0.8% savings in execution time and 15.9% savings in energy consumption.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.261-269
• /
• 2017

The purpose of this paper is to provide a search system using a method of accessing the web in real time without using a database server in order to guarantee the up-to-date information in a single network, rather than using a plurality of bots connected by a wide area network Design. The method of the research is to design and analyze the system which can search the person and keyword quickly and accurately in crepe system. In the crepe server, when the user registers information, the body tag matching conversion process stores all the information as it is, since various styles are applied to each user, such as a font, a font size, and a color. The crepe server does not cause a problem of body tag matching. However, when executing the crepe retrieval system, the style and characteristics of users can not be formalized. This problem can be solved by using the html_img_parser function and the Go language html parser package. By applying queues and multiple threads to a general-purpose web crawler, rather than a web crawler design that targets a specific site, it is possible to utilize a multiplier that quickly and efficiently searches and collects various web sites in various applications.