• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.147-154
• /
• 1998

As technical systems in building are being developed, the processes and systems get more difficult for the average operator to understand. When operating a complex facility, it is beneficial in equipment management to provide the operator with tools which can help in dicision making for recovery from a failure of the system. The main object of the study is to develop real-time automatic fault detection and diagnosis system for optimal operation of IBS building.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.459-462
• /
• 2013

CRDI 시스템에서의 ECU는 센서의 정보를 분석하여 최적의 조건으로 엔진이 동작하도록 한다. 이러한 ECU의 프로그램 부분과 데이터 부분은 제작자에서만 변경할 수 있어 엔진을 진단하는 진단기의 경우 전문가가 아니면 사용하거나 내용을 이해하기가 쉽지 않다. 본 연구에서는 산업용 차량의 엔진 데이터 값을 OBD-II표준을 사용하여 입력받아 사용자 중심의 진단기를 PC 및 모바일용으로 개발하였다. 본 연구의 진단기는 운전자 중심의 진단 서비스를 제공하며, 자동차 고장진단 신호 및 센서 출력 신호를 유선시스템과 무선 시스템인 블루투스 모듈을 이용하여 실시간 통신이 제공되도록 함으로써 엔진이상으로 인한 사고의 예방이 가능하고, 최적의 조건으로 엔진이 동작하므로 과도한 배기가스 배출이나 불완전 연소가스 배출과 같은 대기환경오염을 예방할 수 있어 최근 대두되고 있는 에코산업에도 이바지 할 수 있을 것이다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.107-110
• /
• 2003

산업의 발달과 인구의 증가로 인한 물 사용량 증가와 다양한 폐수들이 끊임없이 발생하고 있다. 회사나 공장들은 이러한 폐수를 처리하기 위한 하ㆍ폐수처리장의 효율적인 운전을 위하여 관리ㆍ제어 시스템을 도입하고 있는 추세이다. 본 논문에서는 김해에 설치되어 있는 축산 폐수를 처리하는 파일럿 플랜트의 공정상태를 원격으로 관리할 수 있는 모니터링 시스템을 바탕으로 퍼지와 신경망을 이용한 실시간 원격 진단 및 제어 시스템을 설계하였다. 또한 여러 경우의 고장 사례를 원격 진단ㆍ제어 시스템에 접목시킴으로써 진단시스템의 성능을 더욱 향상 시켰다. 이러한 진단ㆍ제어 시스템을 이용하여 관리자는 공정상태를 항상 모니터링 할 수 있으며, 진단ㆍ제어 시스템에서 제공하는 경고 및 제어 값을 축산폐수플랜트에 전송함으로써 공정을 보다 효율적이고 안정적으로 진단ㆍ제어할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1157-1158
• /
• 2007

자동차, 항공기, 철도 및 선박 등과 같은 각종 교통수단에 발생하는 이상현상에 대한 사용자의 정확한 복구 조치 능력 향상을 위하여, 발생한 고장코드에 대한 신속하고 정확한 해석은 매우 중요하다. 이에 따라 본 논문에서는 차량의 고장 진단 프로토콜 중 SAE(미국 자동차 기술자 협회) J1979[1]의 방식을 사용하여 차량의 통신방식을 정의 하고 이에 따라 발생되는 ECU 정보들을 수집 분석하여 각각의 고장 코드들을 해석하였고 배기가스뿐만 아니라 차량에서 발생되는 총제적인 문제점들을 GUI(Graphic User Interface) 기반의 응용 프로그램을 이용하여 차량의 단계별, 부품별 고장코드를 실시간으로 발생시킬 수 있는 시뮬레이터를 개발하였다

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.163-169
• /
• 2020

Recently, research on automation and unmanned operation of machines in the industrial field has been conducted with the advent of AI, Big data, and the IoT, which are the core technologies of the Fourth Industrial Revolution. The machines for these automation processes are controlled based on the data collected from the sensors attached to them, and further, the processes are managed. Conventionally, the abnormalities of sensors are periodically checked and managed. However, due to various environmental factors and situations in the industrial field, there are cases where the inspection due to the failure is not missed or failures are not detected to prevent damage due to sensor failure. In addition, even if a failure occurs, it is not immediately detected, which worsens the process loss. Therefore, in order to prevent damage caused by such a sudden sensor failure, it is necessary to identify the failure of the sensor in an embedded system in real-time and to diagnose the failure and determine the type for a quick response. In this paper, a deep neural network-based fault diagnosis system is designed and implemented using Raspberry Pi to classify typical sensor fault types such as erratic fault, hard-over fault, spike fault, and stuck fault. In order to diagnose sensor failure, the network is constructed using Google's proposed Inverted residual block structure of MobilieNetV2. The proposed scheme reduces memory usage and improves the performance of the conventional CNN technique to classify sensor faults.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.86-92
• /
• 2009

As increasing of using induction motors, the induction motors faults cause serious damage to the industry. Therefore to find out faults of induction motor is recognized as important problem awaiting solution. But to make matters worse, the faults of induction motors often progress through long time. It means that early diagnosis is very important. Many researches have been progressed and general method of diagnosis is using vibration sensor to diagnose fault of induction motor. However, although it is reliability technique, it demands high price and it is difficult to use. This paper presents an implementation of technique for fault diagnosis of induction motor using wavelet transform based stator current and it is composed with algorithm that decides whether fault existence or not using C++ based on windows software. The algorithm will be accomplished in real-time using current data acquisition board and PC automatically with Neural Network algorithm.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.481-488
• /
• 2009

GIS is used to isolate large power electrical equipment using SF6 gas. While GIS has simple structure, it has few break down, relatively high reliability. But it is hard to check up faults for reason of pressure. Faults of GIS should have a ripple effect on community and be hard to recovery. Consequently, GIS imports a preventive diagnostic system to find internal faults in advance. It is most important that reliability on the GIS preventive diagnostic system, because it estimates abnormality of system by analysis result of collected data. But, exist system which used central data management is low efficiency, and hard to guarantee timeliness and accuracy of data. To guarantee timeliness and accuracy, the GIS preventive diagnostic system needs accordingly to use a real-time middleware. So, in this paper, to improve reliability of the GIS preventive diagnostic system, we use a middleware based on TMO for guaranteeing timeliness of real-time distributed computing. And we propose an improved GIS preventive diagnostic system applying data acquisition, monitoring and control methods based on the TMO model. The presented system uses the Communication Control Unit(CCU) for distributed data handling which is supported by TMO. CCU can improve performance of the GIS preventive diagnostic system by guaranteeing timeliness of data handling process and increasing reliability of data through the TMO middleware. And, it has designed to take full charge of overload on a data acquisition task had been processed in an exist server. So, it could reduce overload of the server and apply distribution environment from now. Therefore, the proposed system can improve performance and reliability of the GIS preventive diagnostic system and contribute to stable operation of GIS.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.16-22
• /
• 2011

It is recognized that the control surface fault is detected by monitoring the value of the coefficients due to the control surface deviation. It is found out the control surface stuck position by comparing the trim value with the reference value. To detect and isolate the fault, two mixed methods apply to the real-time parameter estimation and similarity measure. If the scatter of aerodynamic coefficients for the fault and normal are closing nearly, fault decision is difficult. Applying similarity measure to decide for fault or not, it makes a clear and easy distinction between fault and normal. Low power processor is applied to the real-time parameter estimator and computation of similarity measure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.173-178
• /
• 2008

Electro-hydraulic brake system has many advantages. It provides improved braking performance and stability functions. It also removes complex mechanical parts for freedom of design, improves maintenance requirements and reduces unit weight. However, the EHB system should be dependable and have back-up redundancy in case of a failure. In this paper, the model-based fault diagnosis system is developed to monitor the brake status using the analytical redundancy method. The performance of the model-based fault diagnosis system is verified in real-time simulation. It demonstrates the effectiveness of the proposed system in various faulty cases.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.55-62
• /
• 2006

For the fault diagnosis of three-phase induction motors, we construct a experimental unit and then develop a diagnosis algorithm based on pattern recognition. The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, preprocessing is performed to make the acquired current simplified and normalized. To simplify the data, three-phase current is transformed into the magnitude of Concordia vector. As the next step, feature extraction is performed by kernel principal component analysis(KPCA) and linear discriminant analysis(LDA). Finally, we used the classifier based on radial basis function(RBF) network. To show the effectiveness, the proposed diagnostic system has been intensively tested with the various data acquired under different electrical and mechanical faults with varying load.