• Journal of the Korean earth science society
• /
• v.31 no.3
• /
• pp.214-224
• /
• 2010

Gravity and Magnetic survey data were analyzed to investigate the geophysical characteristics and regional geological structures of the southwestern Yellow Sea. The set of data about the southwestern part of the Yellow Sea in Korea was one collected by the Korea Ocean Research and Development Institute (KORDI) in 2003, 2004, and 2005. The Yellow Sea has a few basins and the study area also includes parts of the Heuksan Basin and the East China Sea Basin. The bathymetry of the study area ranges from about ?40 m southwestward near China to about 150 m northeastward near Korea. The bathymetry has the gentle rise and fall and the smooth slope. The gravity anomalies, from sea surface gravity and satellite gravity data, reflect the basement rocks rather than the smooth bathymetry. The gravity anomalies are higher on Northeastern part of the study area and lower over the South of the Heuksan Basin. The analytic signal from the Bouguer anomaly shows higher anomalous zones near the boundaries of the basins. The magnetic anomalies and the analytic signal, from the magnetic data, suggest that the complex anomalies on the Northern part are attributed to the volcanic intrusions and that the smooth patterns in the Southern part are based on the lack of the intrusions. The power spectrum analysis of the Bouguer anomalies and the magnetic anomalies indicate that the depth to the Moho discontinuity varies from about 30.2 to 28.3 km and that the depths of the basement rocks and the Eocene discontinuity range from about 8.4 to 8 km and from about 1.5 to 1.7 km, respectively. The inversion of the Bouguer anomaly shows that the Moho depth to the Western part of the study area near China is slightly deeper than the Eastern part near Korea. The result of 2-D gravity modeling has a good coherence with the results of the analytic signal, the power spectrum analysis, and the inversion.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.345-352
• /
• 2017

We propose a methods which is reducing direction estimation error of sound source in the reverberant and noisy environments. The proposed algorithm divides speech signal into voice and unvoice using VAD. We estimate the direction of source when current frame is voiced. TDOA (Time-Difference of Arrival) between microphone array using the GCC-PHAT (Generalized Cross Correlation with Phase Transform) method will be estimated in that frame. Then, we compare the peak value of cross-correlation of two signals applied to estimated time-delay with other time-delay in time-table in order to improve the accuracy of source location. If the angle of current frame is far different from before and after frame in successive voiced frame, the angle of current frame is replaced with mean value of the estimated angle in before and after frames.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1243-1248
• /
• 2016

This paper investigated the channel link budget for Wireless Avionics Intra-Communication (WAIC) in 4.4GHz. The band 4.2~4.2GHz was allocated for the communication service among aeronautical applications in world radiocommunication conference (WRC). Wireless channels in aircraft was modelled by the combination of path loss, shadowing effect caused by obstacles, and fading caused by multipath signals. In addition, wireless channels in aircraft are categorized into 6 groups according to various locations of transmitter and receiver. We analyzed the channel link budget for the 6 channel groups in terms of maximum transmission distance and outage probability. Our analysis and intensive computer simulation results show that the propagation characteristics of group A, B, and F is superior to group C, D, E, and the propagation of group E is the most vulnerable. Also, these results can be utilized as basic reference for the channel analysis of intra-aircraft or similar environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.398-404
• /
• 2015

In this paper, we describe the design and performance of a prototype multi-rotor unmaned aerial vehicle( UAV) platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. Although there has been a fair amount of study of free-flying UAV with multi-rotors, the more recent trend has been to outfit hexarotor helicopter with gimbal to support various services. This paper introduces the hardware and software systems toward very compact and autonomous hexarotors, where they can perform search, rescue, and surveillance missions without external assistance systems like ground station computers, high-performance remote control devices or vision system. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, mathematical modeling and simulation in the helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(MCU)(ARM-cortex) board. The micro-controller is able to command the rotational speed of the rotors and to get the measurements of the IMU as input signals. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.851-858
• /
• 2016

This paper presents a new statistical voice activity detection (VAD) based on the probabilistic interpretation of nonnegative matrix factorization (NMF). The objective function of the NMF using Kullback-Leibler divergence coincides with the negative log likelihood function of the data if the distribution of the data given the basis and encoding matrices is modeled as Poisson distributions. Based on this probabilistic NMF, the VAD is constructed using the likelihood ratio test assuming that speech and noise follow Poisson distributions. Experimental results show that the proposed approach outperformed the conventional Gaussian model-based and NMF-based methods at 0-15 dB signal-to-noise ratio simulation conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1785-1790
• /
• 2016

There is exhibit a degree of pain in the occurrence and course of treatment levels or oral, pain rating scale actions, such as illness, for example, the discomfort scale because of the pain "annoying", "unpleasant" "annoyed am", "painful" represents a pain scale of the order of "painful", "hard to bear", "very difficult to bear". Depression is recognized based on the premise of the situation, because it is difficult to recognize themselves. In this paper we define the components of the depression can be seen lifestyle which can lead to depression or through a biological signal. The depression index was derived from the ontology modeling to understand the state of depression. Depression ontology components and depression index will be aware of the situation based information services for depression. Combined with the situational awareness based devices and can be synchronized to verify the results of the depression index. It will be applied to improve lifestyle factors that of depression.

• Journal of Sensor Science and Technology
• /
• v.11 no.5
• /
• pp.255-262
• /
• 2002

Human retina is able to detect the edge of an object effectively. We designed a CMOS vision chip by modeling cells of the retina as hardwares involved in edge detection. There are several fluctuation factors which affect characteristics of MOSFETs during CMOS fabrication process and this effect appears as output offset of the vision chip which is composed of pixel arrays and readout circuits. The vision chip detecting edge information from input image is used for input stage of other systems. Therefore, the output offset of a vision chip determine the efficiency of the entire performance of a system. In order to eliminate the offset at the output stage, we designed a vision chip by using CDS(Correlated Double Sampling) technique. Using standard CMOS process, it is possible to integrate with other circuits. Having reliable output characteristics, this chip can be used at the input stage for many applications, like targe tracking system, fingerprint recognition system, human-friendly robot system and etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.117-117
• /
• 2009

최근 고집적화 구조는 저항(resistance)과 정전용량 (capacitance)에 의한 신호 지연 (RC delay) 증가로 인한 혼선 (cross-talk noise)과 전력소모 (power dissipation)등의 문제를 발생시킨다. 칩 성능에 영향을 미치는 제한인자를 최소화하기 위해서는 저저항 배선 금속과 저유전상수 (low-k)의 층간 절연막 (IMD, intermetal dielectric) 물질이 필요하다. 최근 PECVD (plasma enhanced chemical vapor deposition)를 이용하여 증착시킨 유기살리케이트 (OSG, organosilicate glass)는 가장 유망한 저유전상수 물질로 각광받고 있다. 본 연구에서는 제일원리 연구를 통하여 OSG의 전구체 중에 하나인 DEMS 문자를 모델링하고, 에너지적으로 가장 안정한 구조를 찾아서 각 원자 간의 결합에 따른 해리에너지 (dissociation energy)를 계산하고, DEMS가 H-terminated Si 표면과 반응하는 기구에 대해 고찰하였다. 최적화된 DEMS 분자의 구조를 찾았고 DEMS 분자가 결합이 깨져 조각 분자군으로 될 때의 에너지들을 계산하였다. 계산된 해리에너지로부터 DEMS 분자의 O 원자와 C분자의 결합이 깨져서 $C_2H_5$를 조각 분자군으로 생성할 확률이 총 8가지의 경우에서 가장 높다는 것을 알 수 있었다. 8 가지의 해리된 DEMS 조각 분자군들이 H-terminated Si 표면과 반응할 때의 반응에너지를 계산한 결과 표면의 Si 원자와 DEMS 분자에서 $C_2H_5$가 해리되어 생성된 조각 분자군의 O 원자가 결합을 하고 부산물로 $C_2H_6$를 생성하는 반응이 가장 선호된다는 것을 알 수 있었다. DEMS 분자로 증착시킨 OSG에 대하여 제일원리법을 이용하여 계산한 연구는 보고된 바 없기 때문에, DEMS 분자의 각 원자 간의 해리에너지와 Si 기판과의 반응에너지는 추후 연구개발의 중요한 기초 자료가 될 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.576-582
• /
• 2001

The Multi-Band Excitation(MBE) speech coder uses a different approach for the representation of the excitation signal. It replaces the frame-based single voiced/unvoiced classification of a classical speech coder with a set of such decision over harmonic intervals in the frequency domain. This enables each speech segment to be a mixture of voiced and unvoiced, and improves the synthetic speech quality by reducing decision errors that might occur on the frame-based single voiced and unvoiced decision process when input speech is degraded with noise. The IMBE-LP, improved version of MBE with linear prediction, represents the spectral information of MBE model with linear prediction coefficients to obtain low bit rate of 2.4 kbps. In this Paper, we proposed a variable rate IMBE-LP vocoder that has lower bit rate than IMBE-LP without degrading the synthetic speech quality. To determine the LP order, it uses the spectral band information of the MBE model that has something to do with he input speech's characteristics. Experimental results are riven with our findings and discussions.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.55-65
• /
• 2014

Recent researches on debris flow is focused on understanding its movement mechanism and building a numerical simulator to predict its behavior. However, previous simulators emulating fluid-like debris flow have limitations in numerical stability, geometric modeling and application of various boundary conditions. In this study, depth integration is applied to continuity equation and force equilibrium for debris flow. Thickness of sediment, and average velocities in x and y flow direction are chosen for main variables in the analysis, which improve numerical stability in the area with zero thickness. Petrov-Galerkin formulation uses a discontinuous test function of the weighted matrix from DG scheme. Presented mechanical constitutive model combines fluid and granular behaviors for debris flow. Effects on slope angle, inducing debris height, and bottom friction resistance are investigated for a simple slope. Numerical results also show the effect of embankment at the bottom of the slope. Developed numerical simulator can assess various risk factors for the expected area of debris flow, and facilitate embankment design in order to minimize damage.