• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.1-4
• /
• 2015

The current official perfluorochemicals (PFCs) analysis method is established with hydrophilic-lipophilic balance (HLB) solid phase extraction (SPE) clean-up method with LC-tandem mass spectrometry ($MS^n$). Herein the HLB clean-up method from the official method by Korean government was modified with Envi-Carb$^{TM}$ to improve the clean-up efficiency for agricultural water and the unexpected UV disturbance in the water was effectively removed by the adsorbent treatment without a significant disturbance of quantitation. And quadrupole time of flight mass spectrometry (qTOFMS) was suggested to the available $MS^n$ instruments for the residue analysis of PFCs based on the ng/L of quantitation limits in water as well.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.2
• /
• pp.223-237
• /
• 2009

본 임상연구는 임상연구 모집 공고를 통하여 모집된 대상자 중 Atopic Dermatitis Research Group (2005) 한국인 아토피 피부염 진단기준에 따라 아토피 피부염으로 판정되고 현재 약물(한약, 양약)치료나 외용제 치료를 하고 있지 않은 만 5$\sim$50세의 아토피 피부염 환자를 대상으로 하였다. 피험자들을 이중맹검, 블록무작위배정하여 시험군과 대조군으로 나누어 6주간의 시험기간 동안 육안적 평가, 혈액학적 검사, 피부측정 장비를 통한 기기적 평가를 시험 전후에 실시하여, 시험군에 사용된 제품이 대조군 사용된 제품에 비하여 얼마나 효과적으로 아토피 피부염으로 손상된 피부 장벽을 회복하는지 관찰하였다. 본 임상시험을 통해 'Atomento solution & cream'이 손상된 피부장벽을 회복시키고 피부 보습력을 증가시켜 아토피 피부염에 효과적이었으며, 인체에 이상반응이나 부작용 없이 안전하게 사용될 수 있음을 확인하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.219-220
• /
• 2013

현재 우리나라의 유방촬영장치의 정도관리 항목에는 국제규격에서 원하는 직선성이 빠져있다. 직선성은 방사선량 및 방사선질의 조정을 위한 요구사항이므로 반드시 측정이 되어야한다. 본 연구에서는 유방촬영장비 5대를 대상으로 IEC 60601-2-45 규격에 맞는 직선성을 시험하고 평가함으로써 좀 더 발전된 정도관리방향을 제시하고자 한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.75-82
• /
• 2000

전자전 장비는 개발 과정에서 재밍 성능을 시험평가하기 위하여 위협 레이더를 대상으로 그 재밍효과를 측정하여야 한다. 종래에는 재밍 효과를 측정하는 방법으로 레이터 스코프에 나타나는 표적의 이동 또는 상실을 육안으로 관측하거나, 레이더 자체에서 실시간으로 저장되는 추적 데이터를 후처리하여 해석하였으나, 본 고에서는 2개의 GPS(Global Positioning System)를 이용하여 두 위치간의 상대위치를 측정하고 이를 레이더의 표적 추적 위치 정보와 비교하여 그 차이를 분석함으로써 실시간으로 재밍효과를 측정하는 방법을 소개하였다.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.149-165
• /
• 1993

Nowadays, the field hydraulic test is still an only method to evaluate groundwater characteristics in subsurface. The results of hydraulic test are very important for the concept model of fracture hydrogeology as well as the geometric pattern of fractures. The hydraulic tests performed in Korea are generally analysed under such assumption as steady radial flow in homogeneous aquifer or along simple geometry of fractures. Also the transmissivity measured in a fixed interval length is equivalent to a sum of individual fracture transmissivities in test legth. The boundary effects of weH hydraulics and the geometry of flow paths are hardly obtained from the test results analysed by a steady flow method. To circumvent this problem, the flow dimensional analysis was attempted from the results of constant pressure injection test carried out in a fractured granite area. A comparison of the hydraulic conductivity values from the transient and steady analysis shows that the latter is about a factor of 2~3 higher than the former. However, it was possible to analyse a flow dimension of each test interval from flow rate variation with time. The upper part of the bedrock(<10m deep) indicates an open boundary and the flow dimension shows nearly steady states, while the lower part of the bedrock(>25m deep) is characterized as sublinear flow dimension with a dosed boundary. In one of the test sections(15m deep), the flow dimension was changed from linear flow to spherical flow. From the experience of this study, one of the immediate problems to be solved is to enhance the field testing equipments, i.e., an accurate flowmeter with autorecording and a pressure detecting device to be able to install in the test section.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.2 s.17
• /
• pp.37-44
• /
• 2005

It reflects well feature of slope that is characteristic of urban river basin of Busan local. In this study, process various hydrological data and basin details data which is collected through basin basis data, hydrological monitoring system(EMS-DEU) and automatic water level equipment(AWS-DEU) for urban flood disaster prevention and use as basin input data of ILLUDAS, SWMM and HEC-HMS in order to examine outflow feature of experiment basin and then use in reservoir design of experiment basin through calibration and verification about HEC-HMS. Inserted design rainfall for 30 years that is design criteria of creek into HEC-HMS and then calculated design floods according to change aspect of the impermeable rate. Capacity of reservoir was determined on the outflow mass curve. Designed detention pond(volume $54,000m^3$) at last outlet upper stream of experiment basin, after designing reservoir. It could be confirmed that the peak flow was reduced resulting from examining outflow aspect. Designing reservoir must decrease outflow of urban areas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.801-811
• /
• 2021

Lightning can deliver large amounts of energy to the aircraft in a short period of time, resulting in catastrophic consequence. In particular, lightning strikes accompanied by high temperature heat and current can damage aircraft surface and internal electronic equipment, seriously affecting flight safety. Lightning experiments to analyze this effect use a Component A waveform with a maximum current of 200 kA as specified in SAE ARP 5412B. However, the actual lightning occurs mostly below 35kA and lightning indirect tests are conducted by reducing waveforms to prevent damage to internal electronic equipment. In this study, we examine previous methods to plot the Component A reduced waveform and identify their limitations. We then propose a new method to plot the reduced waveform based on adjusting the correction factor of the aircraft lightning Component A waveform. Finally, the electromagnetic analysis software EMA3D was used to compare the internal induced current size reduction ratio of the internal cable harness of the EC-155B helicopter.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1149-1154
• /
• 2022

The purpose of this research is to select representative observation stations for winter observation equipment performance tests and to present indoor and outdoor conditions for performance tests by considering snowfall, snowfall days, latitude, and altitude distribution for observation stations operated by the Korea Meteorological Administration. Using the snowfall data observed during the winter for 30 years (1981-2010), ten representative observation stations are selected to consider the classification of snowfall days by class, latitude, and altitude distribution of observation stations. As a result of analysis, the suitable point for outdoor experiments was selected as Daegwallyeong, the average number of snowfall days and snowfall days of 5cm or more were 57.5 and 13.2 days, respectively. The indoor experimental conditions are considered to be suitable under temperatures of -15 to 5℃ and humidity of 50% or higher. Results of this research can be used as basic information for conditions and test beds for performance tests of equipment that can respond to heavy snow disasters in winter.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.31-40
• /
• 2001

일반적으로 장공발파(長孔發破) 방법(Long hole blasting method)은 그동안 주로 대규모 채탄막장이나 댐 기초굴착, 광산 등에서 행하여져 왔으나 최근 토목터널에서 시공 효율성 및 경제성을 목적으로 관심이 높아지고 있다. 기존의 터널설계 패턴은 I -Type을 기준으로 3.5~3.8m 천공이며 신공법 적용시 최대 4.Om까지 설계되는 것이 보통이었다. 과거 착암장비는 천공장이 늘어남으로서 슬러지에 의한 천공속도가 저하되어 천공비가 증가하기 때문에 빠른 슬러지 배제가 필요하고 Rod의 휨 현상에 의한 천공오차의 증대를 초래할 수 있는 단점이 있었다. 그러나 최근 장비의 발달로 인하여 천공각도 및 천공장 등을 Computer로 모니터링하여 제어할 수 있어 정밀한 천공이 가능하여 졌고 또한, 고성능 에멀젼계 폭약(Super Emulsion)의 개발로 그동안 극 경암터널에서 에멀젼계 폭약의 단점으로 여겨졌던 비 장약량의 증대와 사압현상의 발생, 굴진효율 저하문제론 극복할 수 있었다. 따라서 본 연구는 현재 건설중인 대상현장을 중심으로 장공 터널발파의 효율성과 경제성을 분석하고 나아가 암질에 따른 새로운 Type별 설계기준을 마련하는 기초자료로서 활용하고자 하였다. 된 연구의 대상현장은 충북 괴산군 영풍면 소재 중부내륙(여주-구미간) 고속도로 제 9공구 이화터널 건설공사현장으로 $\varphi{102mm}$ 무 장약공 Cylinder 4공을 이용한 심발법을 사용하였으며 천공장은 최대 5.0m로 2000년 11일 15일에서 동년 12월 15일까지 31일간 총 112회의 시험발파를 실시하여 평균 92%의 높은 굴진 효율을 기록하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.323-331
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric form from 2D image. This technique is a growing applicability in the field of sciences. Nevertheless, civil and mechanical field, which need measurements as precise as possible, use expensive measuring instruments in general. In addition there are occasions for analysis by means of visual method, since appropriate measuring instruments have been not yet available. This study therefore developed digital close-range photogrammetric technique with a movable orientation board to quickly measure deformation before and after destruction from simulated ground model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite.