• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.116-121
• /
• 2019

In order to evaluating applicability of RAP (recycled aggregate powder) in mortar, in this study, physical and mechanical tests was carried out. Material characteristics of recycled aggregate and RAP were evaluated and the mechanical properties of mortar replaced with RAP were analyzed. Test result of sieve analysis showed that as the milling time increased the fineness modulus was decreased and the distribution of 0.6 mm particle size was found to increase. The fluidity of mortar mixture substituted with RAP tended to increase than Plain mixture. It was result that the increasing fluidity was affected by unreacted surplus water in the mortar as the binder was replaced with RAP. From the compressive strength result of the mortar subjected to RAP, it was found that the RAP was able to replace up to about 10% of unit binder weight although the compressive strength of mortar was decreased as the RAP replacement increased. From the above study, it can be concluded that the physical properties of RAP satisfied the quality standard of aggregate for replacement with fine aggregate. Moreover, in case of the RAP was replaced up to 10% of unit cement weight, it was able to be possible to improve fluidity and compressive strength of mortar.

• Journal of Life Science
• /
• v.29 no.9
• /
• pp.996-1001
• /
• 2019

Edible insects are reported to be rich in protein, minerals and vitamins, and much attention has been paid to them as a future food source. In Korea, they were massively reared and sold. In order to enhance the market value of edible insects for industrialized mass production, it is important to develop the safe and nutritious feed sources for rearing them are needed. In this study, a chlorella-free control feed (Exp1) and six experimental feeds supplemented with 0.5~2.0% liquid or powder types of chlorella were formulated. Protaetia brevitarsis and Allomyrina dichotoma, registered as food ingredients in Korea, were fed with the designed feeds and parameters of growth including larval survivorship, larval body weight, and larval period were analyzed. When chlorella added, larval survivorship was increased 2~13%(p>0.05) and 9~22%(p<0.05) in each beetle compared to the control. Interestingly, the larval period of chlorella powder-added groups was shortened by 24 days (Exp3, p<0.05) in P. brevitarsis and 19 days (Exp4, p<0.01) in A. dichotoma. Meanwhile, some parameters, crude protein, crude fiber, copper, zinc, potassium, magnesium, and phosphorous, in chlorella-added groups of P. brevitarsis were also higher than the control group. Therefore, chlorella could promote the larval growth performance of these two beetles and be used as a feed additive in rearing them.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.87-103
• /
• 2019

Nonaqueous organic electrolyte solution in commercially available lithium-ion batteries, due to its flammability, corrosiveness, high volatility, and thermal instability, is demanding to be substituted by safer solid electrolyte with higher cycle stability, which will be utilized effectively in large-scale power sources such as electric vehicles and energy storage system. Of various types of solid electrolytes, composite solid electrolytes with polymer matrix and active inorganic fillers are now most promising in achieving higher ionic conductivity and excellent interface contact. In this review, some kinds and brief history of solid electrolyte are at first introduced and consequent explanations of polymer solid electrolytes and inorganic solid electrolytes (including active and inactive fillers) are comprehensively carried out. Composite solid electrolytes including these polymer and inorganic materials are also described with their electrochemical properties in terms of filler shapes, such as particle (0D), fiber (1D), plane (2D), and solid body (3D). In particular, in all-solid-state lithium batteries using lithium metal anode, the interface characteristics are discussed in terms of cathode-electrolyte interface, anode-electrolyte interface, and interparticle interface. Finally, current requisites and future perspectives for the composite solid electrolytes are suggested by help of some decent reviews recently reported.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.22-28
• /
• 2019

Cement is a basic material for the construction industry and it requires high temperature sintering when manufacturing cement. $CO_2$ emissions from raw materials and fuels are recognized as new environmental problems and efforts are underway to reduce them. Techniques for reducing $CO_2$ in concrete are also recommended to use blended cement such as blast furnace slag or fly ash. In addition, the construction waste generated in the dismantling of concrete structures is recognized as another environmental problem. Thus, various methods are being implemented to increase the recycling rate. The purpose of this study is to utilize the inorganic raw materials generated during the dismantling of the structure as a raw material for the low carbon type cement binder. Such as, waste concrete powder, waste cement block, waste clay brick and waste textile as raw materials for low carbon type cement binder. From the research results, low carbon type cement binder was manufactured from the raw material composition of waste concrete powder, waste cement block, waste clay brick and waste textile.

• Journal of Korean Society on Water Environment
• /
• v.35 no.3
• /
• pp.224-233
• /
• 2019

Nitrogen components in liquid manure can reduce safety and quality of environment harmfully. To minimize the environmental risks of manure, understanding fate of manure in environment is necessary. This study aimed at investigating applicability of a simplified Level III fugacity model for simulating $NH_3-N$ component to analyze environmental fate and transport of $NH_3-N$ in liquid manure and to provide basis for improving management of N in the liquid manure system and for minimizing the environmental impacts of N. The model simulation conducted for four environmental compartments (air, water, soil, and rice plants) during rice-cropping to trace $NH_3-N$ component and provided applicability of the Level III fugacity model in studying the environmental fate of $NH_3-N$ in manure. Most of $NH_3-N$ was found in water body and in rice plants depending upon the physicochemical properties and proper removal processes. For more precise model results, the model is needed to modify with the detailed removal processes in each compartment and to collect proper and accurate information for input parameters. Further study should be about simulations of various N-typed fertilizers to compare with the liquid manure based on a modified and relatively simplified Level III fugacity model.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.48-48
• /
• 2019

Amorphophallus paeoniifolius (Dennst.) Nicolson는 영명으로 Elephant yam 또는 Whitespot giant arum 으로 불리는 천남성과(Araceae) 식물로 동아시아, 뉴기니, 오세아니아, 마다가스카르 등지에서 자생하고 있으며 숲의 가장자리 또는 2차림에서 발견 된다. 다년생 식물로 덩이줄기는 어두운 갈색의 둥근모양으로 직경 20~25 cm로 자라고 수염뿌리가 사방으로 달린다. IUCN 적색목록(Red List)에 관심대상 종(LC: Least Concern)에 속하는 식물이다. 현지인들은 마(Dioscorea Polystachya Turcz.)처럼 채소로 먹기도 하며 약용으로 쓰이기도 하는데 복부장애, 소화불량, 천식, 기관지염, 빈혈 등에 약효가 있다. Amorphophallus paeoniifolius은 $25^{\circ}C{\sim}35^{\circ}C$, 연강수량 1,000~1,500 mm에서 잘 자란다. 가운데 눈이 올라오면서 생장을 시작하고 며칠이 지나서야 잎 또는 꽃으로 자라는지 알 수 있다. 잎의 생육주기는 잎눈이 생장을 시작하면 잎자루 끝에 소엽과 소잎자루가 접힌 채로 올라온다. 소엽들이 펴지면서 완전한 모습을 갖추는데 30일 이상의 생장기간을 갖는다. 잎의 형태는 우상복엽(pinnate compound leaf)으로 우산처럼 보이는 잎 하나로 광합성을 한다. 잎은 최대 높이 2.5~3 m, 너비 3 m까지 자라며, 잎자루의 색은 녹색과 청색으로 얼룩덜룩한 무늬가 있다. 인공환경 조건에서 Amorphophallus paeoniifolius 생활사 중 잎의 주기를 연구하기 위해서 광, 온도 등의 지상부 환경은 열대 및 아열대 식물의 자생지와 유사하게 조성하였고, 지하부 환경은 인공 배합토를 사용하여 조성하였다. 평균온도는 $25{\sim}28^{\circ}C$, 겨울철 최저 $16^{\circ}C$, 여름철 최고 $33^{\circ}C$를 유지 관리 하였다. 자동 환경제어시스템으로 온도 및 환기를 유지 관리하고 필요에 따라 수동제어 관리를 병행하여 조절하였다. Amorphophallus paeoniifolius는 잎을 먼저 생성하고 광합성으로 생산된 영양물질을 덩이뿌리에 저장을 하고 그 영양물질을 이용하여 꽃을 피우는 생육 특성을 지닌다. 실험에 사용된 공시 식물은 2018년 12월 미얀마에서 생체(덩이줄기) 형태로 도입되었다. 화분에 식재 후 약 5개월이 지난 시점에서 잎의 생장이 시작되었다. 2019년 7월 29일 기준으로 높이 80 cm, 너비 60 cm의 크기로 성장하였으며, 생육환경에 따라 3~5개월 뒤 잎이 지고 나면 다시 덩이줄기로 되돌아갈 것으로 판단된다. 하지만 지금까지 이 식물에 알려진 정보는 인공환경에서의 연구가 아닌 자연환경에서의 연구결과이기 때문에 인공적인 온실 환경에서 자란 Amorphophallus paeoniifolius는 잎의 주기는 더 오래 갈 수도 있으며 꽃의 주기 또한 느리거나 빠를 수 있다. 잎의 생장주기(Leaf Cycle)시 잎자루가 낮과 밤의 방향을 달리 하여 자라는 것이 관찰되었다. 이는 광합성을 위해서 잎자루의 방향을 햇빛 방향으로 돌리는 것으로 판단된다. Amorphophallus paeoniifolius를 실내 조경 식물 또는 식 약용의 소재식물로 활용하기 위해서는 꽃의 생장주기 등 추가적인 모니터링과 연구가 필요하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.344-348
• /
• 2019

우리나라는 전 국토의 70%가 산지이고 하천경사가 다른 나라에 비해 상대적으로 급하여 홍수 관리에 매우 불리한 조건을 가지고 있으며, 특히 홍수기간의 집중호우 및 돌발홍수는 인명과 재산의 막대한 피해를 입히고 있다. 최근은 기후변화로 인하여 극심한 홍수, 가뭄 등 재해의 발생빈도가 증가하는 추세로 기후변화의 영향을 최소화할 수 있는 수재해 방재관리가 필요한 상황이다. 중 대하천의 경우에는 비교적 수재해 방재관리가 잘 이루어지고 있으나, 소하천(일부 중하천 포함)의 경우에는 취약한 구조를 보이고 있다. 특히 홍수기간(7월~9월)의 인명과 재산의 피해는 주로 소하천 위주로 발생하고 있으며, 사전 사후의 체계적인 대응이 이루어지지 못하고 있다. 수재해 방재관리를 위해서는 일차적으로 수문자료의 획득에 있으며, 그 이후 해당유역에 적합한 수재해 대응을 위한 체계적인 방법론과 방재시스템 개발 운영이 수반되어야 안전한 방재관리를 할 수 있다. 따라서 수재해 방재관리 체계를 구축하기 위해서는 중 소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하므로 중 소규모 유역 단위의 대표성 있는 시험유역의 운영은 매우 의미가 있다고 볼 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 차탄천 시험유역(유역면적 $190.64km^2$, 유로경사 0.96%, 경기도 연천군 소재)의 신뢰성 높은 2018년 관측자료를 이용하여 강우특성, 유출특성, 증발산량 등 수문특성을 분석하였으며, 과거 관측결과와 비교하였다. 강우특성 분석으로는 호우사상 분리, 주요 호우사상 분석, 지속기간별 최대강우량, 시간분포 등이 있다. 2018년은 2017년보다 최대 강우지속기간은 적게, 평균 강우지속기간은 크게, 최대 강우강도는 크게, 평균 강우강도는 적게 나타나는 호우의 특징을 보이고 있다. 2018년 지속기간별 최대강우량의 경우 지속기간 1시간까지는 2017년과 유사한 패턴을 보이나 그 이후는 많은 강우량을 보인다. 2018년의 하천유출률은 총강우량 대비 43.3%(장진교, 유역출구)와 70.3% (보막교, 중간소유역)로 2017년의 장진교(53.1%)와 보막교(60.4%)와는 차이를 보인다. 강우-유출특성 분석결과 연간 총강우량의 증가로 산지가 발달한 보막교는 9.9%의 증가가 있었지만 장진교는 오히려 9.8%의 감소가 있었다. 동일한 유역에서의 하천유출량의 차이는 2개 유역간 강우량 차이(96.1mm)와 토지이용(중 하류부농경지 발달)의 차이에 기인한다고 볼 수 있다. 그리고 2018년의 증발산량은 총강우량 대비 장진교(유역출구)는 32.3%로 2017년 장진교의 38.4%보다는 감소한 값을 보이나 2018년의 증발산량은 424.8mm, 2017년은 427.4mm로 양적의 차이는 거의 없는 것으로 분석되었다. 이와 같이 산정된 수문자료는 수재해 방재와 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용되므로 지속적인 시험유역의 운영은 매우 필요하다.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.65-73
• /
• 2022

This study identified the level of awareness of dangerous accidents by empirically analyzing the possibility of hazardous accidents at work and the possibility of dangerous accidents due to COVID-19 targeting the participating seniors who are active in the Senior Club, an organization dedicated to job placement for the elderly. The purpose of this study is to provide basic data for preparing measures to improve risk accidents that may occur in organizations in charge of job placement for the elderly and to suggest countermeasures to prevent dangerous accidents. For this purpose, data were collected from the elderly participating in 16 senior clubs in Busan, and 425 of the collected 430 were ultimately used. As a result of this study, first, it was found that the elderly who participated in a job-dedicated institution for the elderly generally perceived the possibility of occupational risk accidents and risk factors due to COVID-19 to be low. Second, it was found that there was a statistically significant difference in the probability of occurrence of hazardous accidents at work according to demographic characteristics during the participation period, and the probability of occurrence of dangerous accidents with COVID-19 was found to have statistically significant differences in the classification and age of the participating elderly. Based on the results of this study, the project manager suggested creating a safety accident management record sheet, preparing a risk management manual, and establishing a risk management system reflecting the individual characteristics of the participants.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.383-392
• /
• 2020

This study was conducted to understand the current status associated with challenging behaviors of adults with developmental disabilities and review the perception of workers at lifelong education centers for the developmentally disabled. To that end, a survey and a focus group interview were conducted. The findings were as follows. First, 85.4% of people working at lifelong education centers for the developmentally disabled had experienced injury in the past year due to challenging behaviors, and those who experience injuries responded that they suffered burnout, psychological trauma, and considered changing jobs. Second, in terms of preemptive response by the organization to address challenging behaviors, 'securing individual space' and 'preemptive identification of causes of challenging behaviors' ranked the highest, with 87.5% of the respondents giving this answer, respectively. For follow-up measures, 81.3% of organizations answered that they hold meetings on individual cases and provide supervision. Third, in terms of suggestions for ways to address challenging behaviors, establishment of an organization-wide system and cooperation with related organizations were cited as needed.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.299-314
• /
• 2021

In this study, we investigated the effect of temperature on specific surface area and electrochemical properties when lignin-based porous carbon (LBPC) with potassium hydroxide (KOH) is activated. After preparing LBPCs using lignin-polyacrylonitrile (PAN) copolymer, which was synthesized by graft polymerizing lignin and acrylonitrile as a precursor, activated LBPCs (KA-LBPC-6, 7, 8, 9) were manufactured by activating LBPC with KOH at 600℃, 700℃, 800℃ and 900℃. To identify the surface characteristics of KA-LBPC, observations were made with a scanning electron microscopy (SEM), and the pore characteristics were identified via specific surface area analysis. The electrochemical properties were analyzed using a three-electrode system. The experiment has shown that micropores formed by activation can be observed in SEM images. KA-LBPC-7 had the best pore characteristics among KA-LBPCs, with a specific surface area of 2480.1 m²/g, a micropore volume of 0.64 cm³/g, and a mesopore volume of 0.76 cm³/g. KA-LBPC-7 showed the best electrochemical properties with a specific capacitance of 151.3 F/g at the scan rate of 2 mV/s.