• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.38-44
• /
• 2022

Speech enhancement is performed to improve intelligibility and quality of the noise-corrupted speech. In this paper, speech enhancement performance was compared using different loss functions in time and frequency domains. This study proposes a combination of loss functions to utilize advantage of each domain by considering both the details of spectrum and the speech waveform. In our study, Scale Invariant-Source to Noise Ratio (SI-SNR) is used for the time domain loss function, and Mean Squared Error (MSE) is used for the frequency domain, which is calculated over the complex-valued spectrum and magnitude spectrum. The phase loss is obtained using the sin function. Speech enhancement result is evaluated using Source-to-Distortion Ratio (SDR), Perceptual Evaluation of Speech Quality (PESQ), and Short-Time Objective Intelligibility (STOI). In order to confirm the result of speech enhancement, resulting spectrograms are also compared. The experimental results over the TIMIT database show the highest performance when using combination of SI-SNR and magnitude loss functions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.18-24
• /
• 1985

Above certain filter order, the frequency domain -adaptive filter is superior to the time domain-adaptive filter in computational complexity. In this paper a new type algorithm, $\mu$-FLMs algorithm, is proposed for the frequency domain- adaptive filter and the characteristics of the proposed algorithm is compared with that of the time domain- adaptive filter algorithm($\mu$-FLMS algorithm). The simulation results showed that under the same convergence rate , the frequency domain-adaptive filter is efficient in compu tational burden.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.195-201
• /
• 2001

The time simulation of slow drift motions of moored FPSO in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and are consisted of horizontal plane motions such as surge, sway and yaw. The added mass, wave damping coefficients, first order wave exciting forces and the second order wave drift forces involved in the equations are obtained from three-dimensional panel method in the frequency domain. The mooring lines are modeled as quasi-static catenary cable. As a numerical example, time domain analyses are carried out for a box-type FPSO in long crest irregular wave condition.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.17-27
• /
• 1995

In this paper, Finite Difference Time Domain (FDTD) method is used to analyze characteristics of the electromagnetically coupled broadband microstrip antenna, and to optimize the antenna parameters. By using short tuning stub in feedline, electromagnetically coupled microstrip antenna shows broadband (approximatcly equal 13%) characteristics, and the characteristics are varied as a function of length, width, and position of the tuning stub. Operating frequency, return loss, VSWR and input impedance are calculated by Fourier transforming the time domain results. Measurement data from fabricated electromagnetically coupled microstrip antenna are compared with FDTD results and are shown to be in good agreement. After optimization of the parameters, maximum bandwidth of about 15% is achieved.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.47-53
• /
• 2001

When a ship advancing in waves is subjected to impact forces or irregular forces, the motion analyses for ship are convenient for being calculated in the time domain. The added mass, wave damping coefficients, wave exciting forces and mean drift forces are calculated by 3-Dimensional panel method used the translating pulsating Green function in the frequency domain and the motion equations which are considered by the memory effect due to waves are numerically solved by using the Newmark-$\beta$ method in the time domain. The motion analyses are carried out for a Series 60($C_B=0.7$) moving in irregular waves. The items of calculation are 6-degree motions, accelerations at the fore and after position, numbers of deck wetness and numbers of exposure at ship-bottom, etc. Moreover, the thrust addition in waves is examined by considering the time mean drift forces in the motion equations of time domain.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2011

Accurate response analysis of long span bridges subjected to seismic excitation is important for earthquake hazard mitigation. In this paper, the performance of a typical four span continuous reinforced concrete bridge model subjected to asynchronous multiple seismic excitations at the supports is investigated in both the time and frequency domains and the results are compared with that from a relevant uniform support excitations. In the time domain analysis, a linear modal superposition approach is used to compute the peak response values. In the frequency domain analysis, linear random vibration theory is used to determine the root mean square response values where the cross correlation effects between the modal and the support excitations on the seismic response of the bridge model are included. From the two sets of results, a practical range of peak factors which are defined to be the ratio of peak and the root mean square responses are suggested for displacements and forces in members. With reliable practical values of peak factors, the frequency domain analysis is preferred for the performance based design of bridges because of the computational advantage and the generality of the results as the time domain analysis only yields results for the specific excitation input.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.639-648
• /
• 1999

레이더법은 건축구조물에 대한 비파괴 검사의 대표적인 방법의 하나이다. 레이더법을 이용하는데 영향을 주는 요인들을 연구하고, 레이더로 측정된 결과들을 분석하기 위해서는 전자기파의 전파에 대한 수치적인 모델링을 통한 이론적인 접근이 필요하다. 콘크리트 시편에 전파되는 전자기파를 모델링 하기 위해 유한차분 시간영역법을 적용하고자 한다. 유한차분 시간영역법은 전자파 해석과 모델링을 통한 시뮬레이션에 매우 유용한 방법이다. 본 연구에서는 유한차분 시간영역법을 이용하여 두께가 다른 4개의 시편과 두께는 100㎜로 동일하고 피복두께가 다른 3개의 시편을 3차원으로 모델링 하였다. 두께 측정 모델링 결과에서는 계산영역의 셀간격과 입사파의 파장/콘크리트 시편의 두께값이 모델링의 정확성에 미치는 영향을 알 수 있었다. 철근이 있는 시편의 모델링에서는 0.08%∼0.5%의 오차로 철근의 위치를 확인할 수 있었다.

• Communications of Mathematical Education
• /
• v.12
• /
• pp.489-507
• /
• 2001

교수 ${\cdot}$ 학습 과정에서 계산 능력 배양이 목표인 영역을 제외하고는, 복잡한 계산, 수학적 개념 ${\cdot}$ 원리 ${\cdot}$ 법칙의 이해, 문제 해결력 향상 등을 위하여 가능하면 계산기나 컴퓨터를 적극 활용하도록 한다. 제 7차 교육과정에서는 수학적 힘의 신장을 구현하기 위한 실천적인 항목 중 다음과 같이 교수 ${\cdot}$ 학습과정에서의 technology의 활용을 적극 권장하고 있다. 이는 곧 수학교육과 실생활이 서로 밀접한 관계를 가지고 있음을 의미하는 것이다. 이런 새로운 움직임에 따라 계산기 활용에 대한 관심과 이를 수업에 이용하려는 방안을 적극 모색하고 있으며 이미 많은 자료들이 간행되고 있다. 그래픽 계산기는 컴퓨터와는 달리 많은 자료를 내장하고 있지는 않지만 휴대가 간편하고 개별적으로 사용할 수 있어 학교 수업시간 중 활용하는 데에 큰 장점을 가지고 있다. 또, 수학의 교수 ${\cdot}$ 학습 과정에서 그래픽계산기는 학생들의 흥미를 자극하고, 시각적인 힘을 활용하고, 수학적 사고력을 향상시키며, 문제를 탐구하는 과정에서의 단순한 계산을 효과적으로 처리할 수 있도록 도와준다. 뿐만 아니라 수학의 내적 영역과 수학의 외적 영역을 연결시키는 힘과 학습 과정에서 학생의 주도력을 강화시켜줄 수 있다. 그러나 계산기의 사용 자체가 목표가 될 수는 없으며 그래픽 계산기의 사용으로 학생들의 계산능력을 하락시켜서도 안된다. 이를 위해서는 적절한 교수 ${\cdot}$ 학습법의 개발과 연구가 끊임없이 지속되어야 할 것이다. 그래픽계산기는 함수, 통계 단원에서 자료를 분석하고 그에 적합한 식을 찾는 과정에 매우 유용하게 이용된다. 이는 재량활동이나 특기적성활동 시간에 조작활동을 통하여 개념에 대한 다양한 창의적인 표현을 할 수 있는 기회를 제공하기도 한다. 다음은 함수식을 이용하여 여러 가지 디자인을 할 수 있는 예를 그래픽 계산기를 통하여 보여준다. 생활 속의 여러 가지 모양들은 대체로 함수식으로 표현될 수 있다. 그래픽 계산기는 함수식을 입력하여 그래프의 형태를 관찰하고 그 특징을 살펴보는데 매우 유용하며 제한된 변역에서 여러개의 함수식을 입력하여 원하는 모양의 디자인을 해 볼 수 있다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.314-315
• /
• 2018

본 논문에서는 벅형 AC/DC LED 구동기의 이산 시간 영역 해석을 이용하여 역률 계산 방법을 제안한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.2
• /
• pp.173-179
• /
• 2009

Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively. In addition, it is shown that the reduced system based on the proposed scheme predicts the accurate eigenvalues of global system.