• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.1
• /
• pp.145-158
• /
• 1997

Lipid를 이용하여 보다 안정한 microemulsion을 제조함에 있어 Zeta potential을 이요하여 비교 분석 하여 보았다. 실험 시 Lipid Base와 Cetyl phosphate의 함량변화가 particle size와 zeta potential에 미치는 영향에 대하여 실험을 수행하였으며, zeta potetial의 시간 경과에 따른 경시변황 대하뎌도 조사하여 microemulsion의 적정조건을 찾을 수 있었다. microemulsion과 emulsion에 대하여 안전성을 비교 관찰 하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.1
• /
• pp.81-93
• /
• 1993

창공-91의 비행 시험의 목적은 성능 측정과 비행 특성의 확인이며 교통부의 기준은 주로 비행기의 운항에 따르는 안정성에 주안점을 두고 있다. 비행 시험으로 실속 속도와 이착륙 성능 그리고 상승 성능을 측정하여 비행 교범에 수록하였고, 안정성과 조종성의 적절함을 판단하였다. 창공-91 A2기의 비행 시험에 소요된 비행 시간은 81. 5 시간이다. (창공-91 $A_1$기 : 52.8시간)

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.77-105
• /
• 2023

This paper investigates the management stability of KOSPI-listed energy public enterprises from the perspective of median voter theory. We analyze the profitability and stability of five energy public enterprises during the period 2011~2022, and conduct an empirical analysis to determine whether they are related to the preferences of median voters who can represent the general public. Our analysis of the profitability and stability of the energy public enterprises shows that the stability of their has been deteriorating in recent years. The results of the empirical analysis also show that the management stability of the energy public enterprises is related to the preference of median voter. Specifically, they indicate that when the median voter's income is smaller than the average income, the profitability of the utility decreases and the debt ratio increases. This paper suggests that from the median voter's point of view, excessive utility and energy bills may strengthen the incentives for governments and politicians to suppress rate increases, leading to lower profitability and higher debt for public enterprises.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.325-335
• /
• 2018

Limited access to state information in the design of a feedback controller has brought out a significant amount of research on the design of an output feedback controller. Despite its long endeavor to find an optimal one, it is still an open problem. Thus, we focus on the comparison of existing states of arts in the design of a static output feedback controller in terms of stability and complexity so as to find further research direction in this field. To this end, we present eight design methods in a unified presentation. We also provide the complete description of algorithms which can be applicable to any system configuration. Stability performance and complexity in terms of processing time are evaluated through numerical simulations. Simulation results show that the algebraic controller (AC) algorithm [20] has the smallest complexity while the scaling linear matrix inequality (SLMI) algorithm [18] seems to achieve the best stability in most cases with much higher complexity.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.7-18
• /
• 2024

In this study, slope stability was evaluated in consideration of unsaturated soil behavior to predict landslides. Samples were collected from a landslide site due to heavy rainfall during Typhoon Hinnamnoh. Soil moisture characteristic tests were performed based on the evaporation method using a swelling undisturbed sample and a remolded sample. Based on the hydraulic-mechanical behavior, two-dimensional infiltration and stability analyses were performed. As a result, from the two sample types, it is found that both behaviors exhibited clear differences in the results, and the behavior of the swelling undisturbed sample was able to predict the actual slope failure appropriately.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.336-336
• /
• 2012

유기물/무기물 하이브리드 나노 복합체를 사용하여 제작한 비휘발성 유기 메모리 소자는 공정의 간편성과 휘어짐이 가능한 장점을 가지고 있어 많은 연구가 활발히 진행되고 있으나 대부분의 좋은 전기적 성능을 갖는 소자에 포함되는 나노 입자는 독성을 가지거나 가격이 비싸다는 단점을 갖고 있다. 인체진화적이며 가격이 저렴한 나노입자를 이용한 비휘발성 메모리 소자에 대한 전기적 성능의 안정성에 대한 연구는 미미한 상황이다. 이에 본 연구에서는 인체친화적 $CuInS_2(CIS)$-ZnS 코어-쉘 나노 입자가 분산되어 있는 poly (methylmethacrylate) (PMMA) 박막을 사용하여 비휘발성 메모리 소자를 제작하여 전기적 성능과 안정성에 대한 연구를 하였다. 인체친화적 CIS-ZnS 나노입자를 포함한 PMMA 용액을 Al 하부전극을 가진 p-Si (100) 기판 위에 스핀코팅 방법으로 균일하게 도포 하였다. 남아 있는 용매를 완전히 제거하기 위해 열을 가해 CIS-ZnS 나노입자가 분산되어 있는 PMMA 나노 복합체를 형성하였다. CIS-ZnS 나노입자를 포함한 PMMA 박막 위에 금속 마스크를 사용하여 Al 상부전극을 열 증착 방법으로 형성하여 비휘발성 메모리 소자를 완성하였다. 정전용량-전압 (C-V) 측정을 하여 평탄 전압 이동을 관찰하였고, CIS-ZnS 나노입자의 역할을 알아보기 위해 나노입자가 없는 PMMA 박막을 갖는 소자를 제작하여 동일한 조건에서 C-V 측정을 하였다. 소자의 안정성을 알아보기 위해 평탄 전압-유지 시간 (Vth-t) 측정을 수행하였다. Vth-t 측정은 CIS-ZnS 나노입자가 전하 포획 장소로 사용할 수 있는 것과 전기적 안정성을 갖고 있는 것을 확인하였다. C-V와 Vth-t 측정결과 및 에너지 대역도를 사용하여 CIS-ZnS 나노입자가 분산되어 있는 PMMA 박막을 포함한 나노 복합체를 사용하여 제작한 이용한 비휘발성 메모리 소자에서 전하수송 메커니즘을 설명하였다.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.506-510
• /
• 1996

The stability of prickly pear color as affected by pH, metal ions, sugar and acids was studied. The color of prickly pear was most stable at pH 4 and 5. Metal ions (Fe, Cu) at a level of 100 ppm caused a decrease in stability compared to that of the control, whereas pigment of prickly pear was stable at 100 ppm of Sn ion And the color of prickly pear was stable at 0.15 M fructose. Both 100 and 500 ppm ascorbic acid had the greatest effect on stability, while citric acid, phosphoric acid and tartaric acid had no effect on stability compared to that of the control. Based on the data presented, it was concluded that under selected conditions prickly pear pigment should find application as natural food colorants.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.92-100
• /
• 2010

Combustion stability rating tests of 75-tonf-class thrust chamber for technology demonstration were carried out at a low pressure. Two kinds of mixing heads were used in this study. One of them has injectors of 631 and the other has injectors of 721. Mixing head with injectors of 631 showed a self-oscillation instability at the chamber pressure of 30 bar. Mixing head with injectors of 721 showed that a high frequency combustion stability was maintained under the same pressure and the same mass flow rate. But mixing head with injectors of 721 generated a self-oscillation instability at the chamber pressure of 20 bar and it was found that stability boundary region was changed due to the configuration of a mixing head from these results.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.95-103
• /
• 2020

The structural connection design for lightweight structure application is presented in this paper. Modeling of the welding zone and the bolted connection are suggested. For reliability verification of the established models, nonlinear analysis is performed and comparisons are made with the experimental data showing good agreement. Through comparison study, suitable welding method for structure materials is investigated. Also, stability analysis is performed by fracture load simulation for different number and position of bolts. Finally, based on the structural connection models, the lightweight structure is modeled and structural analysis was performed. Stability analysis of structural connection for lightweight structure design, through combination of welding and bolting process, showed a 31.4% decrease in the maximum stress compared to the structure without the structural connections. Importance of structural connection design is highlighted for lightweight structure stability analysis.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.96-101
• /
• 2005

Fluoropolymer of PTFE and PFA etc. is a heat resistance polymeric material that it is known as that maximum continuous use temperature reaches for 260 $^{\circ}C$. It was observed that these polymers had the enough thermal stability so enough that it was kept by thermal aging of 280 $^{\circ}C$/7 weeks too in this study. However, such thermal stability means that bulk material property is kept such as mechanical strength, melting point and initial pyrolysis temperature etc. If these polymers are evaluate by coating property such as surface contact angle, surface morphology, surface scratch, thing that heat resistance is not enough was confirmed in this study. Thermal aging of flouropolymer coating was achieved by gear aging oven that the exchange rate of air was controlled, and the analysis results were indicating serious damage of surface morphology and adhesive strength on metal substrate.