• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.13-21
• /
• 2016

In this paper we are trying to explain the effect of temperature on polymer membrane exchange water electrolysis (PEMWE) and polymer membrane exchange fuel cell (PEMFC) simultaneously. A comprehensive studying approach is proposed and applied to a 50Watt PEM fuel cell system in the laboratory. The monitoring process is carried out through wireless LoRa node and gateway network concept. In this experiment, temperature sensor measure the temperature level of electrolyzer, fuel cell stack and $H_2$ storage tank and transmitted the measured value of data to the management control unit (MCU) through the individual node and gateway of each PEMWE and PEMFC. In MCU we can monitor the temperature and its effect on the performance of the fuel cell system and control it to keep the lower heating value to increase the efficiency of the fuel cell system. And we also proposed a mathematical model and operation algorithm for PEMWE and PEMFC. In this model, PEMWE gives higher efficiency at lower heating level where as PEMFC gives higher efficiency at higher heating value. In order to increase the performance of the fuel cell system, we are going to monitor, communicate and control the temperature and pressure of PEMWE and PEMFC by installing these systems in a building of university which is located in the southern part of Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2058-2062
• /
• 2009

1992년 한강수계법이 제정되면서 우리나라에 도입된 오염총량관리제는 현재 2차총량관리 시행계획수립 단계에 이르렀다. 오염총량제에서 수질모델은 수계구간별로 설정된 기준유량과 목표수질 조건을 달성하는 지를 판단할 수 있는 도구로 사용되며, 다양한 모델들이 사용되고 있다. 그 중 하천수질모형으로는 주로 QUAL2E, QUALKO, QUALKO2 모형으로 압축할 수 있다. QUAL2E 모형은 1980년대에 개발되어 국내외로 널리 이용하고 있으나 SOD를 0차나 일정량으로 처리하였고, 부착조류에 의한 용존산소 변화와 부유 조류 사멸시 발생하는 유기물이 고려되지 않았다. 또한 용존산소가 부족한 상태에서 반응이 활발한 탈질화과정이 포함되지 않아 이들 반응에 의해 수질이 영향을 받는 하천에 적용하기에는 한계가 있었다. 그리고 QUAL2E 모델은 여러 개의 지류를 가진 대형 하천에는 적용하기 어려운 단점이 있다. 국내에서는 1999년 QUAL2E 모델에 WASP5의 장점을 접목시켜 QUALKO 모델을 개발하였다. 이 모델은 QUAL2E에 부유성 조류의 사멸로 인한 유기물의 내부증가, 탈질화 반응 및 부착식물의 광합성 호흡 과정을 추가한 것이다. 또한 QUAL2E 모델에서 BOD는 CBOD로 입력되고 모의되므로 bottle BOD의 개념이 결여되어 있으므로 이러한 문제점을 보완하고, 조류의 생산 및 사멸에 의한 내부생산 유기물 증가와 탈질화 반응 과정을 추가한 것이다. 우리나라에서 진행되고 있는 총량관리 대상물질은 2010년까지는 $BOD_5$이며, 2011년부터는 일부 지역에 총인이 포함될 예정이다. 2007년에 실험실에서 측정하는 BOD5나 유기성 질소 또는 유기성 인을 그대로 입력하여 계산되고 출력할 수 있으며, 향후 오염총량제의 관리대상항목으로 논의되고 있는 TOC를 모의할 수 있는 QUALKO2가 개발되었다. 이에 본 연구에서는 향후 활용도가 클 것으로 기대되는 QUALKO2 모형에 기존 QUAL2E-UNCAS 모형에 서 수행할 수 있는 불확실성 해석 기법인 Monte Carlo 모의를 가능하도록 모형을 수정하고자 한다. 실제 하천에서의 수질해석에 대한 단순한 표현인 수학적 모형은 불확실성을 내포하고 있으며, Monte Carlo 해석을 사용하여 모형의 불확실도 정량화와 매개변수의 불확실성을 통계학적으로 기술할 수 있다. 또한 각 지점에 대한 계산결과치들에 대해 빈도 및 누가빈도분포 값을 제시함으로서 모형 예측치들의 전반적인 분포경향을 평가할 수 있으며, 하천수질에 대해서 환경기준치를 위배할 가능성을 산정하는데 활용할 수 있다. 우리나라 실정에 맞는 QUALKO2 모형에 Monte Carlo 모의를 통해 신뢰도 기반의 수질해석을 수행하게 된다면 수질정책의 기초자료 제공에 기여할 것으로 판단된다.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.519-524
• /
• 2007

One of the most important issues on the sensor network with resource limited sensor nodes is prolonging the network lifetime by effectively utilizing the limited node energy. The most representative mechanism to achieve a long lived sensor network is the clustering mechanism which can be further classified into the single hop mode and the multi hop mode. The single hop mode requires that all sensor nodes in a cluster communicate directly with the cluster head(CH) via single hop md, in the multi hop mode, sensor nodes communicate with the CH with the help of other Intermediate nodes. One of the most critical factors that impact on the performance of the existing multi hop clustering mechanism is the cluster size and, without the assumption on the uniform node distribution, finding out the best cluster size is intractable. Since sensor nodes in a real sensor network are distributed non uniformly, the fixed size mechanism may not work best for real sensor networks. Therefore, in this paper, we propose a new dynamic size multi hop clustering mechanism in which the cluster size is determined according to the distance from the sink to relieve the traffic passing through the CHs near the sink. We show that our proposed scheme outperforms the existing fixed size clustering mechanisms by carrying out numerical analysis and simulations.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.3
• /
• pp.732-753
• /
• 2017

Recently, when evaluating the technology values in the fields of biotechnology, pharmaceuticals and medicine, we have needed more to estimate those values in consideration of the period and cost for the commercialization to be put into in future. The existing discounted cash flow (DCF) method has limitations in that it can not consider consecutive investment or does not reflect the probabilistic property of commercialized input cost of technology-applied products. However, since the value of technology and investment should be considered as opportunity value and the information of decision-making for resource allocation should be taken into account, it is regarded desirable to apply the concept of real options, and in order to reflect the characteristics of business model for the target technology into the concept of volatility in terms of stock price which we usually apply to in evaluation of a firm's value, we need to consider 'the continuity of stock price (relatively minor change)' and 'positive condition'. Thus, as discussed in a lot of literature, it is necessary to investigate the relationship among volatility, underlying asset values, and cost of commercialization in the Black-Scholes model for estimating the technology value based on real options. This study is expected to provide more elaborated real options model, by mathematically deriving whether the ratio of the present value of the underlying asset to the present value of the commercialization cost, which reflects the uncertainty in the option pricing model (OPM), is divided into the "no action taken" (NAT) area under certain threshold conditions or not, and also presenting the estimation logic for option values according to the observation variables (or input values).

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.444-454
• /
• 2003

An analysis of heart movement is to estimate a role which supplies blood in human body. We have constructed a left ventricle myocardium model and mathematically evaluated the motion of myocardium. The myocardial motility was visualized using some parameters about cardiac motion. We applied the myocardium model in the gated myocardium SPECT image that showed a cardiac biochemical reaction, and analyzed a motility between the gated myocardium SPECT image and the myocardium model. The myocardium model was created of the based on three dimensional super-ellipsoidal model that was using the sinusoidal function. To express a similar form and motion of the left ventricle myocardium, we calculated parameter functions that gave the changing of motion and form. The LSF algorithm was applied to the myocardium gated SPECT image data and the myocardium model, and finally created a fitting model. Then we analyzed a regional motility direction and size of the gated myocardium SPECT image that was constructed on a fitting model. Furthermore, we implemented the Bull's Eye map that had evaluated the heart function for presentation of regional motility. Using myocardium's motion the evaluation of cardiac function of SPECT was estimated by a contraction ability, perfusion etc. However, it is not any estimation about motility. So, We analyzed the myocardium SPECT's motility of utilizing the myocardium model. We expect that the proposed algorithm should be a useful guideline in the heart functional estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.44-51
• /
• 2000

We have analyzed optical matched filters considering the third order signals in the optical code division multiple access (CDMA) system based on optical series coupler access encoder (SCAE) and series coupler access decoder (SCAD). In previous studies, the performance evaluation of the optical CDMA system using SCAE and SCAD was not sufficiently accurate because they analyzed system performance only considering the first order signals. Since optical SCAE and SCAD intrinsically have high order signals of various patterns as the number of coupler increases, they change auto- and cross-correlation intensities. Thus, it is necessary to investigate properties of the third order signals so that we may analyze the exact performance of system. In this paper, we mathematically interpret the optical signals up to the third order, and analyzed the effects of th third order signals on auto- and cross-correlation intensities. In result, as ${\alpha}$(coupling coefficient) value increases, the intensity of the third order signals increases. It is found that the peak to side-lobe ratio considering the third order signals is degraded by 3.75 dB at N(coupler number)=5 and ${\alpha}$=0.5. Also if threshold value in receiver is set by main-lobe peak of the first order signals, it is found that the number of users in an optical CDMA system is limited because the intensity peak of side-lobes is raised by the third order signals.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.116-123
• /
• 2000

A numerical model of three-dimensional soil water distribution for drip irrigation management under cropped conditions was developed using Richards equation in Cartesian coordinates. The model accounts for both seasonal and diurnal changes in evaporation and transpiration, and the growth of plant root and the shape of root zone. Solutions were numerically approximated using the Crank-Nicolson implicit finite difference technique on the block-centered grid system and the Gauss-Seidel elimination in tandem. The model was tested under several conditions to allow the flow rates and configurations of drip emitters vary. In general, simulation results agreed well with experimental results and were as follows. The velocity of soil-water flow decreased drastically with distance from the drip source, and the rate of expansion of the wetted zone decreased rapidly during irrigation. The wetting front of wetted zone from a surface drip emitter traveled farther in vertical direction than in horizontal direction. Under this experimental weather condition, water use efficiency of a drip-irrigated apple field was greatest for 4-drip-emitter system buried at 25 cm, resulting from 10% increase in transpiration but 20% reduction in soil evaporation compared to those for surface 1-drip emitter system. Soil moisture retention curve obtained using disk tension infiltrometer showed significant difference from the curve obtained with pressure plate extractor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.8-15
• /
• 2019

The PM synchronous motor drives with vector control have been applied to wide fields of industry applications due to its high efficiency. The rotor position information for vector control of a PM synchronous motor is detected from the rotor position sensors or rotor position estimators. The sensorless control based on the mathematical model of PM synchronous motor is generally used and it can be classified into back EMF -based sensorless control and magnet flux-based sensorless control. The rotor position estimating performance of the back EMF-based sensorless control is deteriorated at low speeds since the magnitude of back EMF is proportional to the motor speed. The magnitude of the magnet flux for estimating rotor position in the flux-based sensorless control is independent on the motor speed so that the estimating performance is excellent for wide speed ranges. However, the estimation performance of the model-based sensorless control may be influenced by the motor parameter variation since the rotor position estimator uses the mathematical model of the PM synchronous motor. In this paper, the rotor position estimation performance for the back EMF based- and flux-based sensorless controls is analyzed theoretically and is compared through the simulation and experiment when the motor parameters including stator resistance and inductance are varied.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.3
• /
• pp.354-372
• /
• 2022

The purpose of this study is to explore the philosophical position of various scientific theories based on the scientific worldviews for science education. In addition, it aims to expand science education, which has usually dealt with epistemology and methodology, to ontology, that is, to the problem of metaphysics. It can be said that there exists a physical realism, traditionally defined as a strong determinism of the metaphysical belief. That is fixed and unchanging objective scientific knowledge independent of our minds, which was established by Newton, Einstein and Schridinger. What can be seen in the natural laws of dynamics can be called 'mathematicization'. Einstein also shook the traditional views to some extent through the theory of relativity, but his theory was still close to traditional thinking. On the contrary, to escape from this rigid determinism, we need anthropomorphic concepts such as 'possibility' and 'chance'. It is a characteristic of the modern scientific worldviews that leads the change of scientific theory from a classically strong deterministic thought to a weak deterministic accidental accident, probability theory, and a naturalistic point of view. This can be said to correspond to Darwin's theory of evolution and quantum mechanics. We can have three types of epistemological worlds that justify this ontological worldviews. These are rationalism, empiricism and naturalism. In many cases, science education does not tell us what kind of metaphysical beliefs the scientific theories we deal with in the field of education are based on. Also, science education focuses only on the understanding of scientific knowledge. However, it can be said that true knowledge can bring understanding only when it is connected to the knowledge of learned knowledge and the learner's own metaphysical belief in the world. Therefore, in the future, science education needs to connect various scientific theories based on scientific worldviews and philosophical position and present them to students.