• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.259-268
• /
• 1999

Electrical resistivity surveys were conducted in the areas between Buji-ri and Seoak-dong, and between Nawon-ri and Yangdong-ri, Kyongju in order to investigate the geoelectric structure of the nothren part of the Yangsan Fault. In the area between Buji-ri and Seoak-dong south of Kyongju, the fracture zone east of the inferred fault develops more deeply, without significant north-south variation in depth, than west. In the area between Nawon-ri and Yangdong-ri north of Kyongju, the fault zone seems to be developed along the Hyungsan-river, and the resistivity structure west of the river is more affected by the fracture zone than east. Interpreted section of dipole-dipole survey conducted in Homyung-ri shows vertical contact of the Yangsan Fault. It appears that the boundary between the northern and central segment of the Yangsan Fault is located in the north of study areas since there is no significant variation in electrical resistivity structure near Kyongju.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.149-154
• /
• 2008

We analyzed the Coulomb stress transfer near a small-scale reverse fault. For the modeling we used the geometry of a Quaternary fault in Gyeongju area, Eupcheon fault. For an assumed reverse faulting slip of 10cm, the resulting values of the Coulomb stress change are relatively higher (>2 bar) near the edges (both downward and lateral) of the fault, and diminish slightly upward and downward. The equivalents are negative in the zone immediately below and above the fault, exhibiting a "T" shape of low stress zone in the vertical profile of the fault. This study demonstrates the possible ranges and directions the aftershock energy would propagates after a reverse faulting.

• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.193-200
• /
• 2002

울산광역시 울주군 삼남면 가천리와 상천리 일원에 발달하는 양산단층대 중남부의 발달특성과 제4기단층을 기재한다. 이 지역에는 중생대 백악기의 퇴적암과 화강암의 경계부 근처에 양산단층대의 주단층대와 부단층대로 확인되는 대규모의 단층파쇄대가 북북동-서남서 내지 남-북의 주향에 거의 수직으로 발달하고 있다. 단층조선은 수평에 가까우며 단층대내의 구조에 의하면, 주로 우향의 주향이동운동이 우세하다. 한편, 상천리와 가천리에는 이들 기반암과 제4기의 하성 사력층의 경계부 부근에서 제4기단층이 2조 발달하고 있다. 이들은 가천 제1단층과 가천 제2단층으로 기존의 양산단층대 일부가 제4기에 재활동한 것으로, 북북동 방향의 주향에 동측으로 고각의 경사를 보인다 단층조선은 거의 수평이며, 제4기 역들이 단층끌림에 의해 배열된 상태나 단층엽리내의 구조에 의하면 우향의 주향이동성운동이 우세하다.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.59-68
• /
• 1999

To clarify the geological structure of Yangsan fault around Sangchon-ri in the southern part of Kyungsang Basin the resistivity (dipole-dipole profiling) and VLF surveys carried out on the four profiles, crossing the inferred trace of the fault. The resistivity contrast across the fault is clearly shown on the profiles: higher resistivity and lower resistivity on the east and west, respectively. It is most likely from the uplift of the granitic bedrock on the east park due to the strike-fault raulting with vertical movement. The zero-crossing points of VLF anomalies, associated with near-surface fracture zone, are found to well correlate with the resistivity boundaries from the dipole-dipole profiling. Consequently, southern segment of Yangsan fault (at Sangchon-ri area) is interpreted to be vertically developed strike-slip fault with a difference more than 10m depth of basement rock at both sides.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2009

Recent earthquake, such as the Northridge(1994), the Kobe(1995) and the Izmit(1990) earthquakes, gave serious damage in various buildings and bridges by the vertical seismic component. Most of the seismic designs neglect the vertical seismic component for usual frame structures. The purpose of this study is to evaluate the effects of the vertical seismic component and to compare the axial force of columns and plastic rotation angle of the analytical models in these effects. The vertical seismic component produced a large increment of axial force in columns. And the vertical seismic component caused a significant increase of the damage in the columns. As analysis result, increase of axial force cause the damage of columns and give possibility of story collapse mechanism of the structure system. Therefore, area that near fault ground motion is expected may be consider the effect of vertical component of seismic ground motions.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.193-204
• /
• 2001

A geophysical survey was undertaken at Wiri area, Andong, to delineate subsurface structure and reveal the fault zone nearby which heaving of road and subsidence of slope occurred in 1997, especially in the heavy rainy season. Electrical resistivity methods of dipole-dipole array profiling and Schlumberger array sounding and seismic methods of refraction and reflection were performed for the mapping of clay layer, which was interpreted to be the major factor among the reasons of slope deformation. The clay layer was characterized by lower electrical resistivities (< $100{\Omega}{\cdot}m$) and lower seismic velocities (<400 m/s), respectively. The results of electrical and seismic surveys showed that subsidence of slope was probably associated with sliding of wet clay on 18SW/NNW trending fault plane, while heaving of road was probably caused by upward movement of the wet clay through subvertical NNE trending fault.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.167-181
• /
• 2017

Cheongryangsan area ($49.51km^2$) has been designated as the Provincial Park in 1982, because it has magnificent aspect and seasonally spectacular landscapes. Especially, Cheongryangsa sitey ($4.09km^2$) has been designated as Noted Scenery No. 23 in 2007, because it has the same topographical landscape as rock cliffs, rock peaks and caves. The most spectacular landscapes are exhibited in the Cheongryangsan Conglomerate and Osipbong Basalt. There are twelve rock peaks on the ridges of the two strata, and many rock cliffs in the several valleys of strata, in which a few caves are formed by differential weathering and erosion. The valleys, in which flow Cheongryang, Bukgok and Cheonae streams, are classified as fault valleys along WNW-ESE faults. The rock cliffs were generated from vertical joints parallel to WNW-ESE faults in the two strata, and the caves were formed by differential weathering and erosion along bedding of sandstones and shales intercalated in the conglomerates. The rock peaks are landscapes formed by differential erosion along crossed vertical joints in the ridges. The vertical joints are developed subparallel to two WNW-ESE faults and a NNE-WWS fault. Therefore the topographical features are caused by existence of the faults and Lithologic difference in the Cheongryangsan Conglomerate and Osipbong Basalt, and by differential weathering and erosion along them.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.231-240
• /
• 2016

Three Quaternary faults have been revealed in marine terraces nearby the Homigot and the Gurongpo in the southeastern offshore of Korean Peninsula. The Hajung fault cuts the $4^{th}$ marine terraces and the Guman fault the $2^{nd}$, respectively. The Hajung fault strikes $N55^{\circ}$ to $45^{\circ}W$ and dips $40^{\circ}$ to $45^{\circ}NE$ with reverse-displacement of 180cm vertically. There are four sets of colluvial sediment strata that would be produced by faulting and indicate four times of fault movements during MIS 7 and MIS 5c. The Guman fault site consists of three sets of reverse faults that strike $N80^{\circ}E$ to $N70^{\circ}W$ and dip $25^{\circ}{\sim}35^{\circ}SE$ to $30^{\circ}SW$ with vertical displacement of 9~18 cm. The Guman faulting occurred during 80 ka (MIS 5a) to 71 ka (MIS 4) but it extends only to the lowest bed, the pebble sand bed, lay just on the unconformity, and not to the upper. Considering the attitude of the faults, we inferred that the Hajung fault was activated under the ENE-WSW compression during MIS 7 to MIS 5c and the Guman under N-S trending compression during MIS 5a. Using the OSL age dating results, we reconfirmed that the $2^{nd}$ terrace is correlated to MIS 5a and the $4^{th}$ terraces to MIS 7.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.155-168
• /
• 1999

The paleoseismological importance of the Yangsan fault zone was examined by historical earthquake data, aerial photograph, and trench survey of the area. Occurrences of great earthquakes during the historical time indicate that the Yangsan and/or Ulsan fault have been active during the late Quaternary and generated historical events. Geomorphological evidences of the recent fault activity are clearly shown both in the northern segment (Yugye-ri, Tosung-ri and Naengsu-ri areas) and in the southern segment (Eonyang to Tongdosa areas) of the Yangsan fault. The main Yangsan fault is characterized by fault gouges and NNE-SSW lineaments. The reverse faulting in the Yugye-ri area generated about three-mater displacement of the lower terrace deposits. On the other hand, a major strike-slip movement with a minor component of 5-12 m vertical displacement was identified by the offset of the higher terrace surface in the Eonyang area.