Coulomb stress transfer due to reverse faulting displacement field

역단층성 변위에 의한 Coulomb stress transfer

  • Ko, Min-Suk (Dept. of Geology and Earth Environmental Sciences, Chungnam National University) ;
  • Chang, Chan-Dong (Dept. of Geology and Earth Environmental Sciences, Chungnam National University) ;
  • Lee, Jun-Bok (Dept. of Geology and Earth Environmental Sciences, Chungnam National University) ;
  • Shim, Taek-Mo (Korea Institute of Nuclear Safety)
  • 고민석 (충남대학교 지질환경과학과) ;
  • 장찬동 (충남대학교 지질환경과학과) ;
  • 이준복 (충남대학교 지질환경과학과) ;
  • 심택모 (한국원자력안전기술원)
  • Published : 2008.10.09

Abstract

We analyzed the Coulomb stress transfer near a small-scale reverse fault. For the modeling we used the geometry of a Quaternary fault in Gyeongju area, Eupcheon fault. For an assumed reverse faulting slip of 10cm, the resulting values of the Coulomb stress change are relatively higher (>2 bar) near the edges (both downward and lateral) of the fault, and diminish slightly upward and downward. The equivalents are negative in the zone immediately below and above the fault, exhibiting a "T" shape of low stress zone in the vertical profile of the fault. This study demonstrates the possible ranges and directions the aftershock energy would propagates after a reverse faulting.

소규모 역단층성 변위에 의한 단층주변부의 Coulomb stress의 변화를 모델 분석하였다. 본 연구에서 사용된 단층의 기하학적 형태와 응력자료는 경주시에 위치한 제4기 단층인 읍천단층의 조건을 적용하였다. Coulomb stress 모델링에서 단층면을 따라 역단층성 소규모 변위(10cm)를 가정할 경우 단층의 가장자리 주변(주향방향 양끝과 경사방향)에서 Coulomb stress의 변화가 상대적으로 높게(>2 bar) 나타났고 단층의 상하부에서 감소하는 경향을 보였다. 단층의 수직적인 단면에서는 단층의 직하부와 단층 주향의 수직방향에 "T" 자 형태의 낮은 음의 값을 보였다. 본 연구 결과는 주 단층의 역단층성 변위에 의해 나타나는 여진의 전파경로 양상을 보여준다.

Keywords