• Proceedings of the Korean Aquaculture Society Conference
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.118-118
• /
• 2003

홍조류 김속 해조 5종(모무늬돌김, 방사무늬김, 참김, 긴잎돌김, 잇바디돌김)의 사상체를 2단계 냉각법으로 액체질소 중에서 동결보존을 시행하였다. 시료를 여러 가지 동해보호제에 현탁시킨 후 프로그램 냉각기로 4시간에 걸쳐 -4$0^{\circ}C$까지 천천히 동결시켰다. 일차 완만동결 종결 후 즉시 동결용 튜브를 액체질소 중에 수용하여 급속동결 시켰다. 해동시에는 4$0^{\circ}C$의 항온수조에서 대부분의 얼음 결정을 급격히 해동시킨 후 냉각수내에서 완전히 해동시켰다. 생존률은 김 속 해조에서는 neutral red로 염색하여 산정하였으며 50% 해수에 10% DMSO와 0.5M sorbitol 혼합액을 동해보호제로 사용하였을 때의 생존율이 54.6~70.9%였다.

• Water for future
• /
• 제12권2호
• /
• pp.49-55
• /
• 1979

The purpose of this study is to develope the computer program to compute the unsteady, transient flow conditions in a hydraulic system. The unstready flow condition may be brought about due to power failure to pump motors, pump start-up or modulation of control valve. The program was written specially for analyzing the water-hammer in the pumping system. The pumping system which can be simulated by the program can contain pipelines, tunnel, surge tanks, branched lines, reservoirs, dead end pipes and valve controls. The use of a computer program to analyze haydranlic transients is of great benifit to the designers of transmission main and distribution systems. Advantages include time savings, the ability to analyze complex piping systems, and increased accuracy. The author outlines a pogram developed for the above system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.742-742
• /
• 2012

한국건설기술연구원 하천실험센터는 이수, 치수, 환경을 조화시키는 하천기술을 개발하기 위하여 2009년 11월 경상북도 안동시 남후면 하아리 낙동강변에 준공되었으며 초당 8톤의 인공홍수발생이 가능한 3개의 실험수로와 유 출입수조, 다목적호수실험장, 저류지 및 연구동으로 이루어져 있다. 본 연구는 하천실험센터의 식생과 3가지 유형(본류형, 자연제방지류형, 인공제방지류형)의 인근 하천식생을 비교분석하여 하천실험센터의 현재 식생환경을 파악하고 차후 연구의 기초선 자료로 활용하기 위하여 수행되었다. 2011년 7월부터 9월 사이에 하천실험센터(급경사수로, 직선수로, 사행수로, 유출수조, 자연식생보존구간), 낙동강 본류, 상리천, 하아천에서 대표성을 갖는 장소 각각 1개 지소를 선정하여 식물상조사 및 식생단면조사를 진행하였으며 조사된 자료를 바탕으로 습생도, 교란도, 외래종율, 종다양성지수를 산출하였다. 또한 군집분석(Cluster Analysis)을 통하여 현재 하천실험센터의 식생환경이 타 조사지의 하천식생과 비교하여 어떤 유사성을 보이는지 확인하였다. 전체조사구간에서 총 108종류의 식물이 출현하였다. 3개의 실험수로는 수 습생식물의 종수가 일반하천의 수 습생식물의 종수보다 적었으며 반면에 육상식물의 종수는 더 많게 조사되었다. 또한 1 2년 식물의 경우 실험수로에서 더 많이 출현하였고 다년생초본과 목본은 소수였다. 하천실험센터의 자연식생보존구간의 경우 총 식물 종수 및 수 습생식물의 종수가 최대값을 나타내었고 식물상의 출현유무를 바탕으로 군집분석을 수행한 결과, 하천실험센터의 실험수로는 낙동강 본류, 상리천, 하아천과 유사도가 낮게 구분되었으며 자연식생보존구간은 낙동강 본류 및 상리천과 유사도가 높게 분류되었다. 하천실험센터의 실험수로는 준공당시 기존의 식생이 모두 제거된 상태에서 인위적으로 조성되었기 때문에 현재까지는 하천식생의 특징이 두드러지지 않으며 육상식생에 가까운 식생환경을 나타내고 있다. 자연식생보존구역의 경우 다양한 버드나무류와 초본류가 정착되어 있으며 타 대상지에 비하여 가장 뛰어난 생태성을 가지고 있다. 하천실험센터는 하천실험을 위한 장소이나 그 자체로 생태가치가 높으며 차후 생태연구, 홍보, 교육활동에 유용하게 활용할 수 있는 잠재력을 내포하고 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제36권5호
• /
• pp.819-830
• /
• 2016

Hydrodynamic characteristics of wave propagation through density stratification have not been identified in details. So this study conducted a numerical simulation using LES-WASS-3D ver. 2.0 for analysis of density current due to water temperature and salinity in order to analyze hydraulic characteristics under wave action in a two-layer density stratified fluid. For the validity and effectiveness of numerical wave tank used, it was compared and analyzed with the experiment to show waveform based on $3^{rd}$-order Stoke wave theory at the internal of a density stratification. Using the results obtained from numerical simulation, the surface and internal wave heights are reduced as the wave propagates in a two-layer density stratified water. And the surface or internal wave attenuation became more serious as the vorticities were increased by the velocity difference of wave propagation due to the upper-lower density difference around the interface of a density stratification. As well, the surface and internal wave attenuations became more serious with higher density difference and depth ratio between upper and lower layers when the wave propagates through a density stratification.

• Journal of the Society of Naval Architects of Korea
• /
• 제34권4호
• /
• pp.12-20
• /
• 1997

A potential-based panel method has been developed to investigate the resistance characteristics of a high speed catamaran advancing on the free surface. Normal dipoles and sources are distributed on the body surface while sources are distributed on the free surface. Linearised free surface conditions are used in the present analysis. To avoid the instabilities due to the velocity difference between inner and outer flow of a high speed catamaran, Kutta condition has been applied at the stern. Model test has been carried out not only to validate the numerical results but to confirm the capabilities of a CWC(Circulating Water Channel). It is believed that we can obtain the qualitatively reasonable results in the CWC. Computed results are compared with those of experiments and Insel's experimental values. Since the Kutta condition is applied at the stern, stable solutions are obtained at the high speed range. The present method, using linearised free surface conditions at the high speed range, seems to be a useful tool in the hull form design of a high speed catamaran.

• The KSFM Journal of Fluid Machinery
• /
• 제5권3호
• /
• pp.33-39
• /
• 2002

The head-capacity corves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and with no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. However, various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall, and back-wall due to different clearances from back-wall to vortical intake pipe. Moreover, the locations and patterns of the various types of vortices that were found in the examinations are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.95-101
• /
• 2002

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a sin91e pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found within a sump of pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface due to different clearances from back-wall to vertical intake pipe with bell mouse and without. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-215
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the Pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.563-569
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• The Korean Journal of Pesticide Science
• /
• 제12권3호
• /
• pp.222-228
• /
• 2008

Algal Growth-inhibition tests were conducted with 6 pesticides butachlor GR (5%), butachlor EW (33%), isoprothiolane GR (12%), isoprothiolane EC (40%), diazinon GR (3%) and diazinon EC (34%) to determine their comparative toxicity to three species of freshwater green algae Selenastrum capricornutum, Scenedesmus subspicatus, Chlorella vulgris and one species diatom Nitzschia palea. The test species were exposed to the test pesticide for 72 hours and the toxicity represented $EC_{50}$ value calculated by the reduction in growth rate at 72 hours. The toxicity of EC or EW formulation to green algae and diatom was higher than the toxicity of GR formulation at all test in this study. Also, the toxicity of EC formulation was higher than the toxicity technical pesticide. These results indicate that the types of pesticide formulation may affect on their toxicity on algae and the green alga, S. capricornutum and S. subspicatus were more sensitive than C. vulgris. Also, the sensitivity of the diatom, N. palea showed equal or lower than S. capricornutum, S. subspicatus but more sensitive than C. vulgris.