nptype Si(100)웨이퍼를 precleaning하고 HF 용액에 dip etching한 후 E-beam dvaporator에 장착하여 Co 단일막($170\AA$, $340\AA$)과 Co/Ti 이중막($200\AA$/ $(50-100)\AA$)을 성장시켰다. 시편의 RTA 과정에서는 N2분위기에서 direct annealing 방식으로 열처리 온도와 시간을 변화시켜가며 Co-silicidation 공정을 수행하였다. Co 단일막으로 형성된 Co-실리사이드의 면저항은 $500^{\circ}C\leq$T$\leq$$850^{\circ}C$범위에서 열처리 온도와 시간의 변화에 관계없이 거의 일정한 값을 나타내었다. Co/Ti 이중막의 경우 Co-실리사이드의 형성온도가 Co 단일막의 경우에 비해 높게 나타나고 낮은 비저항의 CoSi2를 얻기 위해서는 $800^{\circ}C$이상의 온도로 열처리해야 함을 알 수 있었다. XRD 분석결과, Co 단일막으로부터 얻어진 CoSi2는 (111) 및 (220) 결정상을 나타내었으나, Co/Ti 이중막에 의한 CoSi2는 (200)결정상만이 나타나서 Si(100)기판과 에피층을 이루고 있음을 알 수 있었다. 본 실험에서 CoSi2의 비저항은 약 $18\mu$$\Omega$.cm로 나타났으며, TEM 및 AES 분석으로부터 Co/Ti bilayer-실리사이드가 다량의 Si과 Ti 외에 소량의 Co가 섞여있는 표면 복합층과, Si과 Co만이 존재하는 내부 에피층으로 구성됨을 확인하였다.
Kim, Su-Yeon;Song, Jin-Dong;Lee, Eun-Hye;Han, Il-Gi;Lee, Jeong-Il;Kim, Tae-Hwan
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.297-297
/
2011
일반적으로 고출력 반도체 레이저 다이오드는 발진 파장 및 광출력에 따라 다양한 분야에 응용되고 있으며, 특히 발진파장이 808 nm 대역인 고출력 레이저 다이오드의 경우 재료가공, 펌핌용 광원, 의료 분야 등 다양한 응용분야를 가진 광원 중의 하나라고 할 수 있다. 808 nm 대역의 레이저 다이오드 제작에는 현재 InGaAsP/InGaP/GaAs 및 InGaAlAs/GaAs 양자우물을 이용하여 제작되고 있으나 양자우물과 이를 둘러싸는 장벽물질간의 band-offset이 적어 효율적인 고출력 레이저 다이오드의 제작에 다소 어려움이 있기 때문에 강한 캐리어 구속 효과를 지니는 양자점 혹은 양자대쉬 구조를 사용하는 것이 고출력 레이저 다이오드를 제작할 수 있는 한 방법이다. 실험에 사용된 InP/InGaP 양자구조는 Riber사의 compact21 MBE 장치를 사용하여 성장하였으며 GaAs기판을 620-630도에서 가열하여 표면의 산화층을 제거하고 580도에서 약 100 nm 두께의 GaAs 버퍼층 및 50 nm 두께의 InGaP층을 성장하였다. 양자 구조는 MEE (migration enhanced epitaxy) 방식으로 성장되었는데, 이는 InP/InGaP 의 lattice mismatch율이 작아 양자 구조 형성이 어렵기 때문에 InP/InGaP 양자 구조 성장에 적합하다고 생각하였으며, Indium 2초, growth interuption time 10초, phosphorous 2초 그리고 growth interuption time 10초를 하나의 시퀀스로 보고, 그 시퀀스를 반복하여 양자 구조를 성장하였다. 본 실험에 사용된 P 소스는 Riber사의 KPC-250 P-valved cracker모델을 사용하였으며 InP의 성장률은 0.985${\AA}/s$이다. InP/InGaP 양자구조 성장 중에, 성장 온도, 시퀀스 수의 변화 등 다양한 조건을 변화 시켜 샘플을 성장시켰고, 양자 구조 성장을 확인하기 위하여 AFM 및 SEM을 통해 구조적 분석을 하였으며 PL 측정을 통해 광학적 분석을 진행하였다.
The Journal of Korean Institute of Communications and Information Sciences
/
v.35
no.6A
/
pp.547-554
/
2010
Recently, the multi-band orthogonal frequency division multiplexing(MB-OFDM) system, one of UWB system, can satisfy the requirement and can be applied to various wireless communication services because ultra-wideband(UWB) is a wireless communication technique that supports high data rate with low power. In this paper, the method applying Alamouti's space time block code(STBC) and cyclic delay diversity(CDD) is proposed. The proposed method can be easily applied with arbitrary number of relays and only needs two time slots of quasi stationary assumption. And it is applied to the MB-OFDM system. Second, an optimal relaying scheme based on decode-and-forward(DF) method is proposed which is provides good error performance compared to conventional schemes.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.37
no.11
/
pp.1131-1139
/
2009
Combustion Instabilities are caused by a coupling between acoustic waves and unsteady heat release. They can be eliminated using passive controller such as a Helmholtz resonator. But, Helmholtz resonator is normally only effective over a narrow frequency range. In this work, Helmholtz resonator is applied for reducing the combustion oscillations and we vary the Helmholtz resonator volume using piston in oder to tune in the wide range of operating conditions. As the result, it is found that the dominant combustion oscillations can be largely reduced by optimizing the size of resonator volume. And, interesting relation for phase difference of dynamic pressure both combustor and the helmholtz resonator are presented in this paper. Also, we investigate semi-active control using Helmholtz equation and phase difference.
Journal of the Korean Society of Earth Science Education
/
v.12
no.2
/
pp.151-164
/
2019
The purpose of this study is to find out the effects of reconstructing unit 'Seasonal Change' using step-by-step questioning for concepts changes to adjusting misconceptions of elementary school students. Most students have pre-conceptions at describing seasonal changes based on their experiences. Therefore, in newly developed unit, we reconstructed unit to include core teaching and learning contents by finding out common pre-conceptions of students and specifying purpose of teaching at misconceptions found in pre-conceptions as 'constituent of class for conceptual change'. After the scientific concept test, the result of 24 students in experimental group is statistically significant. Also, according to the result of qualitative analysis, the number of activated conceptional resources and degree of specificity in explaining seasonal changes are higher than that of control group.
The aim of this study is to elucidate the meaning of school dropout which teenager unmarried mothers have been experiencing. Thus, the researchers conducted in-depth interviews of 6 unmarried mothers to portray vividly their voices and the data were analyzed using a qualitative case study. Acording to the results, the meaning of school dropout of teenager unmarried mothers was redefined as the matter of "identity and status deprivation". Also, their school dropout expediences should be analyzed in the more extended perspective beyond the negative meaning of the existing studies. This meant " the one sided exclusion from academic community." This could be drawn with the implications that the exclusion acted as the inner mechanism of another social exclusion and their school dropout served as the bondages of their lifetime. That is, the problem of school dropout has the meaning of 'the present tense' and 'the future tense' simultaneously. Within this context, the phenomenon in which they experienced was acting as the foundation of a continuous exclusion and discrimination. Also, it was found that our society applied its standards to them unilaterally and they came to live as otherness through their pregnancy. Based on these results, this study has an important significance in that it overcame the limitations of previous research and investigated their subjective worlds.
Proceedings of the Korea Information Processing Society Conference
/
2008.05a
/
pp.826-829
/
2008
모바일 환경에서는 모바일 기기의 제한된 에너지를 효율적으로 사용하는 것이 요구된다. 특히 모바일 Peer-to-Peer(P2P) 시스템에서 모바일 기기가 피어로서 저장된 에너지를 모두 소모하면 더 이상파일 탐색 등과 같은 작업에 참여할 수 없게 된다. 또한 에너지가 없는 피어가 증가하게 되면 파일탐색 실패율이 증가하게 되고, 결국 파일탐색이 불가능하게 된다. 슈퍼피어(super peer)를 기반으로 한 계층적 P2P 시스템은 기존 단일 계층 P2P 시스템보다 더 적은 양의 메시지로 파일탐색을 가능하게 해준다. 하지만 하나의 슈퍼피어가 관리하는 서브피어(sub-peer)가 많을 경우, 서브피어의 관리 비용과 파일 탐색 요청의 증가로 슈퍼피어의 에너지 소모 비율이 크게 증가하게 되며, 이로 인해 네트워크 참여 시간이 줄어들게 된다. 이는 전체 네트워크 유지시간 감소에 영향을 미친다. 본 논문은 무선 통신 기반의 모바일 환경에서 슈퍼피어를 기반으로 한 계층적 P2P 시스템을 기반으로, 슈퍼피어가 관리하는 서브피어들의 수를 제한하고, 만약 일정한 수를 초과하였을 경우, 초과한 슈퍼피어의 서브피어들 중에서 새로운 슈퍼피어를 선정하고, 기존 슈퍼피어로부터 일부 서브피어들을 분배하여 관리하게 하는 시스템을 제안하였다. 실험을 통해 성능을 평가 하였으며, 실험 결과 파일 탐색 요청을 위한 네트워크 유지시간이 더 오래 지속됨을 확인하였다.
Kim Sang-Kyun;Lee Jeong Chul;Jeon Sang Won;Lim Chung Hyun;Ahn Sae Jin;Yun Jae Ho;Kim Seok Ki;Song Jinsoo;Park S-J;Yoon Kyung Hoon
한국신재생에너지학회:학술대회논문집
/
2005.06a
/
pp.205-208
/
2005
최근 열선 화학 기상 증착법(HWCVD)은 낮은 온도에서 TFT용 Poly Si 중착을 할 수 있다는 점과 실리콘 박막을 빠른 속도로 증착할 수 있다는 점에서 각광을 받고 있다. 본 연구에서는 HWCVD를 이용하여 태양전지를 제조하고 그 특성을 평가하였다. 조건에 따른 실리콘 박막의 특성 변화를 알기 위해 corning glass 및 실리콘 wafer에 다양한 조건에서 단위 박막(intrinsic layer)을 증착하였고 이 결과를 바탕으로 p/i/n 구조의 태양전지를 제조하였다. Ta 열선 온도는 1700-2000도였고 가스 원료인 $SiH_4$와 수소의 비율을 조절하면서 그 영향을 관찰하였다. 태양전지의 경우 p충과 n충은 PECVD로 증착하였으며 단위박막 및 태양전지 i충 증착시 기판과 열선간의 거리는 7cm, 기판 온도는 $200^{\circ}C$와 $250^{\circ}C$로 고정하였고 작업압력은 30mTorr였다. 단위 박막 특성 평가를 위해 암/광 전도도, SEM, Raman Scattering, FT-IR등을 사용하였으며 태양전지 특성 평가를 위해 I-V 및 Spectral response를 측정하였다. 열선 온도가 증가함에 따라 증착속도 및 결정화 분율은 증가하였다. 특히 비정질에서 결정질로 전이되는 구간은 매우 좁았으며 여러 분석 방법에서 일치되는 결과를 보였다. $SiH_4$ 유량이 늘어날수록 비정질이 결정질로 바뀌는 열선 온도가 증가하였으며 기판 온도가 낮을 경우 또한 결정으로 바뀌는 열선 온도가 증가하였다. 태양전지의 경우 열선 온도가 증가함에 따라 $V_{oc}$ 및 W가 낮아졌으며 $J_{sc}$, 는 증가하는 경향을 보였으며 결정질 비율이 증가하는 것을 관찰할 수 있었다. 이러한 경향은 quantum efficiency 결과에서도 확인할 수 있었다.용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$ 등의 예후 인자를 보정한 다변
Image morphing to generate 2D transitions between images may be difficult even to express simple 3D transformations. In addition, previous view morphing method requires control points for postwarping, and is much affected by self- occlusion. This paper presents a new morphing algorithm that can generate automatically in-between scenes from un-calibrated images. Our algorithm rectifies input images based on the fundamental matrix, which is followed by linear interpolation with bilinear disparity map. In final, we generate in-between views by inverse mapping of homography between the rectified images. The proposed method nay be applied to photographs and drawings, because neither knowledge of 3D shape nor camera calibration, which is complex process generally, is required. The generated in-between views can be used in various application areas such as simulation system of virtual environment and image communication.
$Cu(In_{1-x}Ga_{x})Se_2$(CIGS)는 매우 큰 광흡수계수를 가지고 있으므로 박막형 태양전지의 광흡수층 재료로서 많은 연구가 진행되고 있다. 박막이 태양전지의 광흡수층으로 이용되기 위해서는 큰 결정크기와 평탄한 표면, 적당한 전기적 특성을 가져야 한다. 이러한 특성들은 CIGS 박막의 조성에 큰 영향을 받고 있는 것으로 보고되고 있다. 본 연구에서는 동시증발법을 이용하여 Cu/(In+Ga) 비를 0.9로 고정한 후 Ga 조성(Ga/(In+Ga)의 비 : 0.32, 0.49, 0.69, 0.8, 1)을 변화시켜 Wide band gap CIGS 박막태양전지를 만들었다. 기판은 soda line glass를 사용하였고 뒷면 전극으로는 Mo를 스퍼터링법으로 증착하였다. 또한 버퍼층으로는 기존에 쓰이고 있는 CdS를 CBD(Chemical Bath Deposition)법으로 층착시켰으며, 윈도우층으로는 i-ZnO/n-ZnO를 스파터링 법으로 층착하였다. 그리고 앞면전극으로는 Al을 E-beam 으로 증착하였다. 분석은 XRD, SEM, QE로 분석하였다. 위 실험에서 얻은 결과로는 Ga/(In+Ga)비가 증가할수록 Cu(In,Ga)Se2 박막은 회절 peak들이 큰 회절각으로 이동하였고, 이것은 Ga 원자와 In 원자의 원자반경의 차이에서 기인된 것으로 사료된다. 또한 Ga 조성이 증가할수록 단파장 쪽으로 이동하는 것을 볼 수 있으며, Voc가 증가하다가 에너지 밴드캡이 1.62 eV 이상에서는 Voc가 감소하는 것을 볼 수 있는데 이것은 Ga 조성이 증가할수록 에너지 밴드캡이 커지면서 defect level 이 존재하기 때문인 것으로 사료된다. Ga/(In+Ga)비가 1일 때의 변환효율은 8.5 %이고, Voc : 0.74 (V), Jsc : 17.2 ($mA/cm^{2}$), F.F : 66.6(%) 이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.