• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.20-20
• /
• 2010

반도체 공정 등에서 10-6~10-8 Torr의 고진공 환경을 제공하기 위하여 사용되는 고진공 터보분자펌프 (Turbomolecular Pump, TMP)는 다층의 회전깃을 갖는 로터를 회전시켜 분자를 배출시키는 방식을 사용하는 진공펌프이다. 또한 최근에는 디스플레이 및 반도체 공정에서 높은 진공도뿐만 아니라, 높은 배기속도를 요구하는 추세에 따라, 터보 펌프와 드래그 펌프부분을 동시에 가지고 있어 상대적으로 작동 진공도 영역이 넓은 복합 분자펌프(Compound Turbomolecular Pump, CMP)의 활용도가 넓어지고 있다. 이러한 분자펌프가 장시간의 고속회전에 적합하도록 비접촉 방식인 자기부상 방식의 적용이 최근 거의 표준화되어 있다. 자기베어링 시스템은 전자기력을 이용하여 자성체인 회전축을 부상지지 함으로써 비접촉 고속 회전이 가능하여 윤활이 용이하지 않은 진공 환경 등 가혹한 환경에 적합하며, 터보분자펌프는 자기베어링이 가장 널리 사용되고 있는 분야이기도 하다. 자기베어링 시스템의 설계는 크게 하드웨어와 소프트웨어로 나누어질 수 있는데, 하드웨어의 경우 전체 로터 시스템의 특성을 고려하여 설계되어야 하며, 주로 자기베어링 코어와 코일, 변위센서 및 전력 증폭 시스템 등의 기전적인 요소들이 이루어져 있다. 하드웨어 설계와 함께 제어시스템의 설계도 매우 중요하며, 이는 자기베어링 시스템이 불안정한 특성을 갖는 개루프계를 갖고 있으므로 안정화를 위한 능동제어 시스템이 필수적이며 진동제어 등 여러 가지 기능이 요구되기 때문이다. 본 논문에서는 이러한 자기부상형 고진공 복합분자펌프의 제어를 위한 선형제어시스템의 구성을 실제 시스템의 적용을 통하여 설명하였다. 각 제어기는 DSP 를 이용한 디지털 제어시스템으로 구성되었으며, 2, 500 l/s 급의 복합 분자펌프 시작품에 적용하여 10,000 rpm까지의 기본성능시험을 수행하였다.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.94-101
• /
• 2019

The dynamic characteristics of the composite reflector panels are numerically and experimentally investigated. A dynamics model of the panel is analytically developed based on a deployment mechanism of the antenna. The deployment is passively activated using elastic energy of a spring with two rotational degrees of freedom. Using the flexible multi-body dynamic analysis ADAMS, dynamic behavior of the panels such as velocities, deformations, as well as reaction forces during the deployment, are investigated in the gravity and zero-gravity cases. The reflector panel is manufactured using carbon fiber reinforced plastics (CFRPs) and its deployment characteristics are experimentally observed using a zero-gravity deployment test. The impact response and vibration problems that occur during deployment of the antenna panel have been identified and reliably deployed using dampers.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.97-106
• /
• 1994

The dependence of the electrical resistivity on the eutectic composition and growth rates was investigated in the unidirectionally solidified Sb-InSb and Sn-Bi eutectic alloy systems, which were generally classified into the groups of f-f and nf-f eutectic system. Sb-InSb alloys containing 26-34wt.% In and Sn-Bi alloys containing 53-65wt.%Bi were prepared in vacuum sealed in a silica tube, and then these were unidirectionally solidified. Electrical resistivity of the specimens prepared by cutting the crystal section in parallel with the transverse direction and by cutting in longitudinal direction was measured. As the growth rate increased, the Sb-InSb and Sn-Bi eutectic alloys showed that the resistivity of longitudinal to the growth direction was increased but that of transverse to the growth direction was decreased. In the case of Sb-InSb eutectic alloy, increas~ng the phase boundary area and decreasing the fiber directionallity caused to increase the $p \; \parallel$ , while increasing the phase boundary area increased the $p \; \\perp$ As expected, the eutectic microstructure could be analysed well in terms of electrical resistivity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.387-390
• /
• 2009

본 연구에서는 유한요소 해석 상용 소프트웨어 중 하나인 ABAQUS 을 이용하여 기존의 ABAQUS 가 고려하지 못했던 상변태와 변태소성을 고려하는 프로그램을 개발하고 이를 이용하여 실제 용접 공정 해석을 수행하였다. 열원의 크기와 분포, 속도, 이동 경로 등을 모사하기 위해서 DFLUX 를,복합상에서의 재료의 열팽창 계수와 열변형률을 정의하기 위해서 UEXPAN 을 코딩하였다. 또한 재료의 상분율 및 온도에 따른 열적 구성 거동을 정의하기 위해서 UMATHT를 상변태와 그에 따른 변태소성을 반영하여 응력을 갱신하는 UMAT을 구현하였다. User Subroutine UMAT 은 아탄성 수식화와 합분해를 이용하여 증분형(Rate-form)으로 응력을 갱신하며 아탄성 수식화를 이용하여 상변태와 변태소성이 고려된 대응접선 계수가 새롭게 정의되었다. 프로그램의 타당성과 정확성을 검증하기 위해서 이미 그 정확성이 입증된 GFC(General Finite-element Code)를 사용하였다.

• Composites Research
• /
• v.27 no.4
• /
• pp.130-134
• /
• 2014

The purpose of this paper is to build DB in order to Propose new constitutive equations by redefining constitutive equations for Polyurethane presented by Jeong et al. [12] based on Quasi-static test and Impact test DB of Expanded polypropylene using cylindrical specimens with 4 different densities presentsd by Kim et al. [7] for EPP foam and combining the impulse-momentum theory.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.55-60
• /
• 2011

Numerical analyses of a turbine redesigned to achieving the weight reduction by equipping square nozzles and the original turbine have been conducted and the results have been compared. The results show that the turbine with square section nozzles has more even flow distribution at the first row rotor inlet and less inactive areas but the loss induced by wake is increased. Despite the wake loss, the newly designed turbine shows better performance than the original one. It has also been found that the turbine performance can be improved by reshaping its stator and second row rotor.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.254-259
• /
• 2009

The mixed cooling dryer has been developed significantly by adopting both advantages of cooling dryers and desiccant dryers. In this study, it is introduced that the desired effect, such as drying rate period reduction and energy-saving, could be achieved only by adding the desiccant dryer if an existing cooling dryer is used. The experiment should be conducted for quite long time due to the material selection, so it is regrettable that there are not enough data.

• Journal of Internet of Things and Convergence
• /
• v.10 no.3
• /
• pp.25-33
• /
• 2024

In tomographic image reconstruction, the focus is on developing CT image reconstruction methods that can maintain high image quality while reducing patient radiation exposure. Typically, statistical image reconstruction methods have the ability to generate high-quality and accurate images while significantly reducing patient radiation exposure. However, in cases like CT image reconstruction, which involve multi-dimensional parameter estimation, the degree of the Hessian matrix of the penalty function is very large, making it impossible to calculate. To solve this problem, the author proposed the PEMG-1 algorithm. However, the PEMG-1 algorithm has issues with the convergence speed, which is typical of statistical image reconstruction methods, and increasing the penalty log-likelihood. In this study, we propose a reconstruction algorithm that ensures fast convergence speed and monotonic increase in likelihood. The basic structure of this algorithm involves sequentially updating groups of pixels instead of updating all parameters simultaneously with each iteration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.191-196
• /
• 2016

Recently, power dissipation is a very significant issue not only in embedded systems and mobile devices but also in high-end modern processors. Especially, by the prevalent use of smart phones and tablet PCs, low power consumption of microprocessors is requisite. In this paper, a fast power measurement tool for a high performance microprocessor based on the trace-driven simulator has been developed. The power model of the microprocessor consists of complex combinational circuits, array structures, and CAM structures. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed to estimate the average power dissipation of each program.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.121-130
• /
• 1999

Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.