• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.518-518
• /
• 2023

자연하천에서 오염물질의 혼합 거동은 비균일한 지형학적 요인으로 인해 매우 복잡한 특성을 나타낸다. 일반적으로 오염물질 거동 모델링에서는 수체에서의 혼합을 Fick의 법칙에 따라 유속에 의한 이송과 난류에 의한 확산으로 계산하고, 국부적인 정체현상 등에 의한 non-Fickian 혼합을 야기하는 하천의 특성을 기하학적 지형 형상으로 구현하여 실제 현상에 근접한 혼합 거동을 재현한다. 하지만 계산의 효율성을 위하여 모델링의 차원을 낮추는 경우, 하천의 지형을 경계조건으로 고려할 수 없게 된다. 특히, 1차원 모델링의 경우 하천의 비균일성을 무시하고 1개의 유선으로 간주하며, 이 경우 non-Fickian 물질이동 해석을 위한 추가적인 현상학적 해석이 필요하다. 지난 50년간, non-Fickian 물질이동 해석을 위한 다양한 현상학적 모형이 제시되어 왔다. 하천을 흐름영역과 정체영역으로 구분하고 두 개의 영역 사이의 물질교환 속도를 모델링하거나, Random walk 개념으로 물질이 이동하는 경우와 이동하지 않는 경우를 확률론적으로 모델링하거나, 물질이 정체되었을 때 다시 빠져나오는 시간을 모델링하는 경우가 그 예이다. 본 연구에서는 선행연구에서 제시한 음함수 형태의 현상학적 모형을 기반으로, 수치적 반복계산 없이 상류 경계에서 임의의 형태의 농도곡선(shape-free breakthrough curve)을 갖는 오염물질운(cloud)이 일정 거리를 유하하며 발생하는 변화를 예측할 수 있는 해를 제시한다. 본 연구의 방법론은 추적법(routing procedure)을 활용한 Fickian 혼합 해석, 전달함수(transfer function) 형태의 정체시간분포 해석, 그리고 라플라스 도메인에서의 해석해 유도를 포함한다. 본 연구에서 제시된 해는 2020년 경상북도 김천시에 위치한 감천의 4.5 km 구간에서 수행한 추적자 실험의 현장 자료를 통해 정확도를 검증하여 타당성을 입증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.2
• /
• pp.79-86
• /
• 2024

In this paper, a novel visual tracking method which can utilize the context of object regions is presented. Conventional methods have the inherent problem of treating all candidate regions independently, where the tracker could not successfully discriminate regions with similar appearances. This was due to lack of contextual modeling in a given scene, where all candidate object regions should be taken into consideration when choosing a single region. The goal of the proposed method is to encourage feature exchange between candidate regions to improve the discriminability between similar regions. It improves upon conventional methods that only consider a single region, and is implemented by employing the MLP-Mixer model for enhanced feature exchange between regions. By implementing channel-wise, inter-region interaction operation between candidate features, contextual information of regions can be embedded into the individual feature representations. To evaluate the performance of the proposed tracker, the large-scale LaSOT dataset is used, and the experimental results show a competitive AUC performance of 0.560 while running at a real-time speed of 65 fps.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.321-328
• /
• 2017

Recently EC-MBR (Elctrocoagulation - Membrane Bio Reactor) has been suggested as one of alternative processes to overcome membrane fouling problems. Most important operational parameters in the EC-MBR are known to current density and contact time. Their effect on membrane filtration performances has been reported well, however, quantitative interrelationship between both parameters not been investigated yet. The purpose of this study is to give a kinetic model suggesting the current density and the contact time required to reduce the membrane fouling. The 4 different set of current densities (2.5, 6, 12 and $24A/m^2$) and contact times (0, 2, 6 and 12 hr) were selected as operational parameters. After each electro-coagulation under the 16 different conditions, a series of membrane filtration was carried out. The membrane fouling decreased as the current density and contact time increased, Total fouling resistances under different conditions, $R_t(=R_c+R_f)$ were calculated and compared to those of the controls ($R_0$), which were calculated from the data of experiments without electro-coagulation. A kinetic approach for the fouling reduction rate ($R_t/R_0$) was carried out and the equation ${\rho}^{0.46}_it=7.0$ was obtained, which means that the product of current density and the contact time needed to reduce the fouling in certain amounts (in this study, 10% of fouling reduction) is always constant.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.70-85
• /
• 2021

Deep learning methodology, which has been actively studied in recent years, has improved the performance of artificial intelligence. Accordingly, systems utilizing deep learning have been proposed in various industries. In traffic systems, spatio-temporal graph modeling using GNN was found to be effective in predicting traffic speed. Still, it has a disadvantage that the model is trained inefficiently due to the memory bottleneck. Therefore, in this study, the road network is clustered through the graph clustering algorithm to reduce memory bottlenecks and simultaneously achieve superior performance. In order to verify the proposed method, the similarity of road speed distribution was measured using Jensen-Shannon divergence based on the analysis result of Incheon UTIC data. Then, the road network was clustered by spectrum clustering based on the measured similarity. As a result of the experiments, it was found that when the road network was divided into seven networks, the memory bottleneck was alleviated while recording the best performance compared to the baselines with MAE of 5.52km/h.

• Journal of Convergence Society for SMB
• /
• v.4 no.2
• /
• pp.33-39
• /
• 2014

In this paper, basic backgrounds about capsule endoscopy are introduced, and the aims and objectives are also illustrated. Methodology and mathematical model for LuGre model were investigated to analyse system characteristics. A nonlinear friction model, the stick-slip motion system based on LuGre friction model was used to simulate the motion of capsule endoscopy inside human body. Under the different situation, LuGre friction model was simulated by Matlab Simulink software. The entire cycle of motion and the influence of parameters towards to velocity are fully simulated.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.258-265
• /
• 2006

DEVS formalism is advantageous in modeling large-scale complex systems and it reveals good readability, because it can specify discrete event systems in a hierarchical manner. In contrast, it has drawback in that the simulation speed of DEVS models is comparably slow since it requires frequent message passing between the component models in run-time. This paper proposes a method, called model composition, for simulation speedup of DEVS models. The method is viewed as a compiled simulation technique which eliminates run-time interpretation of communication paths between component models. Experimental results show that the simulation speed of transformed DEVS models is about 18 times faster than original ones.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.338-346
• /
• 2013

The conventional lead acid battery is optimized for cranking performance of engine. Recently electric devices and fuel economy technologies of battery have influenced more deep cycle of dynamic behavior of battery. I also causes to reduce battery life-time. This study proposed that aging battery model is focused for increasing of battery durability. The stress factors of battery aging consist of discharge rate, charging time, full charging time and temperature. This paper considers the electrochemical kinetics, the ionic species conservation, and electrode porosity. For prediction of battery life cycle we consider battery model containing strong impacts, corrosion of positive grid and shedding. Finally, we validated that modeling results were compared with the accelerated thermal measurement data.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.566-572
• /
• 2017

As NAND flash storage is being widely used, its simulation methodologies have been studied in various aspects such as performance, reliability, and endurance. As a result, there have been advances in NAND flash storage simulation for both functional modeling and timing modeling. However, in addition to these advances, there is a need to drastically reduce the long simulation time that is required to evaluate the aging effect on flash storage. This paper proposes a so-called multi-core scalable real-time flash storage simulation method, which can control the simulation speed according to the user's preference. According to this method, it is possible to speed up the simulation in proportion to the number of CPU cores arbitrarily given while guaranteeing the correctness of the simulation result. Using our simulator implemented in the form of the Linux kernel module, we demonstrate the multi-core scalability and correctness of the proposed method.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.503-512
• /
• 2003

Recently many applications are being developed as web technologies are evolved rapidly, but the development emthodology and quality improvement speed of the web apllications is not so. The creations of Most web applications have developed depending on the developer's knowledge and experience without a systematic development methodologies. But the web-based application systems require the various developing gechniques and the rich developing methodogies for a design process. This paper applies the UML(Unified Modeling Language) supporting an object-oriented development methodology to the design and implementation of a mobile customer management system. That is, it appliesthe UML to the system modeling based on a story board and a requirement specification at the web development of the similar web applications. Applying UML to this system achieved the analysis and the design of an web application effciently.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.113-121
• /
• 2014

In this work, an integrated model including molecular dynamics and chemical rate theory was implemented to calculate the growth of point defect clusters(PDC) and copper-rich precipitates(CRP) which could change the mechanical properties of reactor pressure vessel(RPV) steels in a nuclear power plant. A number of time-dependent differential equations were established and numerically integrated to estimate the evolution of irradiation defects. The calculation showed that the concentration of the vacancies was higher than that of the self-interstitial atoms. The higher concentration of vacancies induced a formation of the CRPs in the later stage. The size of the CRPs was used to estimate the mechanical property changes in RPV steels, as is the same case with the PDCs. The calculation results were compared with the measured values of yield strength change and Charpy V-notch transition temperature shift, which were obtained from the surveillance test data of Korean light water reactors(LWRs). The estimated values were in fair agreement with the experimental results in spite of the uncertainty of the modeling parameters.