• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.179-183
• /
• 1994

A high efficiency small electromagnet (22 mm air gap and $40{\times}25mm^{2}$ core's cross section) suitable for measuring magnetostriction and magnetic anisotropy was biult. The magnet could be minaturized by reducing the measuring space and time. The excitation current of the electromagnet was supplied for only a few second of measuring time. Cooling system of the electromagnet could be eliminated since the dissipation energy was very small. An 0.5 T magnetic field was generated with 180 W power consumption. The values of magnetostriction and magnetic anisotropy were measured with a very sensitive capacitance cell with resolution of $10^{-8}$ and 1 nJ. The torque was calibrated using a soft magnetic ribbon's shape anisotropy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1318-1323
• /
• 2010

A lot of demand for parts of millimeter wave band, as would be expected 57~63 GHz band down conversion mixer was designed and fabricated using IHP 0.25 um SiGe process. Designed and fabricated mixer was double balanced type and located reduced 3D balun at RF port and buffer amplifier at outport for suppression LO signal and conversion gain. Fabricated mixer measured conversion gain of 13.8 dB, $P1dB_{in}$ -17 dBm and 88 mA of current consumption characteristics, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1235-1239
• /
• 2010

In this work, a wideband technique has been proposed that improves the IF bandwidth of mixers and a 24-GHz down-conversion mixer employing the proposed technique has been designed and fabricated based on 0.13-${\mu}m$ RFCMOS technology. The mixer showed the conversion gain of $2.7{\pm}1.5$ dB from DC to 5.25 GHz IF for a fixed LO frequency of 24 GHz. Measured P-1dB and LO-RF isolation was -8.7 dBm and 21 dB, respectively. The mixer draws DC current of 10.6 mA from 1.3 V supply.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.98-104
• /
• 2013

This paper presents a WBAN UWB receiver circuit for RTLS(real time location system) and wireless data communication. The UWB receiver is designed to OOK modulation for energy detection. The UWB receiver is designed for sub-sampling techniques using 4bit ADC and DLL.The proposed UWB receiver is designed in $0.18{\mu}m$ CMOS and consumes 61mA with a 1.8V supply voltage. The UWB receiver achieves a sensitivity of -85.7 dBm, a RF front-end gain of 42.1 dB, a noise figure of 3.88 dB and maximum sensing range of 4 meter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.67-73
• /
• 2015

This paper presents a fully integrated 3 - 5 GHz IR-UWB(impulse radio ultra-wide band) RFIC for Location based system. The receiver architecture adopts the energy detection method and for high speed sampling, the equivalent time sampling technique using the integrated DLL(delay locked loop) and 4 bit ADC. The digitally synthesized UWB impulse generator with low power consumption is also designed. The designed IR-UWB RFIC is implemented on $0.18{\mu}m$ CMOS technology. The receiver's sensitivity is -85.7 dBm and the current consumption of receiver and transmitter is 32 mA and 25.5 mA respectively at 1.8 V supply.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1005-1006
• /
• 2008

기존의 전자식 안정기 특히 펄스로 시동되는 HID램프용의 안정기에서는 부가적인 시동회로가 필요하게 된다. 하지만 램프 제조업자에 의해 규정된 점화 펄스폭은 제조업자 간에서도 다양하며, 대단히 높게 되어 있으며 그 펄스폭에는 최소 필요한 값이 있고 이것은 통상 $1.5{\sim}2.5us$정도이다. 이와 같은 시동 펄스폭의 조건을 만족하기 위해서는 시동회로 또한 복잡해지고 제작비용도 고가가 된다. 본 연구는 전력소모가 20[%]이상 절감되면서도 광량이 더 많이 방사되는 메탈핼라이드 램프를 UV경화 시스템 즉, LCD, PDP OLED 모듈조립, 평면, 곡면 스크린 인쇄용, 코팅용, 실험용 UV경화 및 UV노광 시스템 등에 사용 가능한 전자식 안정기를 고주파 시동의 이점을 유지해 가면서 지연 시간에 기인하는 램프의 꺼짐 및 대순환 전류의 문제를 해소하고 고압 대용량 램프를 구동할 수 있는 20KW급 전자식 안정기를 제안하여 22KW UV LAMP를 사용하여 전자식 안정기를 구동 실험으로 검증하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.394-399
• /
• 2012

In recent years, MEMS sensors show huge attraction in machine condition monitoring, which have advantages in power, size, cost, mobility and flexibility. They can integrate with smart sensors and MEMS sensors are batch product. So the prices are cheap. And the suitability of it for condition monitoring is researched by experimental study. This paper presents a comparative study and performance test of classification of MEMS sensors in target machine fault classification by 3 intelligent classifiers. We attempt to signal validation of MEMS sensor accuracy and reliability and performance comparisons of classifiers are conducted. MEMS accelerometer and MEMS current sensors are employed for experiment test. In addition, a simple feature extraction and cross validation methods were applied to make sure MEMS sensors availabilities. The result of application is good for using fault classification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1588-1596
• /
• 1999

This paper describes a signaling processor IC for land mobile radio systems. This IC generates CTSS tone or DCS code signals for signaling between the land mobile radio systems and decodes them to open the audio path. The CTSS tone or DCS code signals occupy the subaudio band and are transmitted with voice signal. The audio and subaudio paths consist of switched capacitor filters. The IC has been implemented in 0.6-$\mu\textrm{m}$ 2-poly 3-metal CMOS process. The chip size is 3 mm$\times$4.3 mm and total current is about 3.4 ㎃ at 3.3 V.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.235-238
• /
• 2007

There is great interest in the applicability of generated hydrogen peroxide to a variety of industrial processes, usually involving oxidation of organics. Hydrogen peroxide is now employed for the bleaching as well as mechanical and chemical treatment in the pulp and paper industries. It addition, it is considered as an agent to displace the traditional alkaline treatments with chlorine-based chemicals. This paper reports a comparative study of $H_2O_2$ electogeneration on gas-diffusion electrode in divided cell with several $Nafion^{(R)}$ proton-exchange membranes, Russian cation-exchange membrane MK-40 and SPEEK membrane. The influence of different PEMs on electro-chemical cell voltage, current efficiency and energy consumption of hydrogen peroxide generation has been studied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.764-768
• /
• 2002

In this paper, a double balanced gilbert cell MMIC mixer was realized in Tachyonics SiGe HBT technology. The fabricated mixer has 17 dB conversion gain, 9.8 dB noise figure, -4.2 dBm output 1 dB compression point, -27 dBc RF to IF isolation, and the good input, output matching characteristics. It draws 10 mA from a 3 V supply. The simulation and the measured results are closer to each other, which confirms accuracy of the model library and reliability of the process.