• Journal of the Society of Disaster Information
• /
• v.14 no.1
• /
• pp.89-100
• /
• 2018

when the explosive wastes to be treated as designated wastes are brought into the wastes treatment plant by mistake and lead to an explosion in the wastes disposal process, many people and property damage are involved. Waste should be treated properly. As mentioned in this paper, ignition reac- tion tests of ignitable re-burning of explosives packing material waste (solid butadiene) confirmed that ignition was easily occurred, and that even small ignition sources were easily ignited and burned quickly and explosively. In particular, when explosives are loaded into incineration wastes in large quantities and mixed with organic compound wastes, such as fire and explosion accidents caused by explosives packing materials at waste disposal sites, flammable and oxidative gases are generated due to mutual oxidation and pyrolysis It is confirmed that there is a possibility that ignition sources such as spark ignite and instantaneously lead to explosion. It is hoped that this study will be a small reference for on - site detection in the field of fire, and it is expected that the fire - fighting agency will be recognized as a fire investigation agency and will contribute to the improvement of the credibility.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.3
• /
• pp.287-295
• /
• 2010

Dust samples have been collected from streets, schools, subway stations and households in Daegu metropolitan city. Samples were sieved through a 100 ${\mu}m$ mesh and the concentration of 14 elements have been determined using by ICP after acid extraction. Results showed that Ca, Fe, K, Mg, Mn, Na and V were influenced by natural sources while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources. The measured values were remarkably higher in components from natural sources than in components from anthropogenic sources. In particular, school dust had higher levels of Ca and Pb and subway station dust had higher levels of Cu and Zn. The percentage composition of chemicals from subway stations, households, and schools were remarkably higher in components from anthropogenic sources than that from streets. It is well recognized that anthropogenic sources were affected by indoor dust. Results of pollution index of hazardous heavy metals indicated that schools, households, and subway stations were more contaminated than streets and urban areas typically had higher pollution index than rural areas. The correlation analysis among trace elements seem to suggest that there were correlations between components of soil/road dust resuspension, and components of waste incineration and fuel combustion.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.101-109
• /
• 2016

This research is to explore food waste management across local governments. In particular, pubic administration on food waste, food waste management (from generation to disposal) and civil complaints in jurisdiction are examined. In doing so, a self-administered questionnaire survey was conducted among civil officers in charge of food waste management, and all the collected responses were statistically analyzed. The main results were as follows: public spending on food waste management was a little larger in metropolises than in provincial cities, and the largest food waste source was identified as households (in housing). While regular collection of food waste by trucks was the most common transport method adopted by local governments, resource recovery for compost/fertilizer production was widely used. Also, most of the respondents agreed that the current approach to food waste handling practices are necessarily replaced with more advanced technology converting waste into energy or fuel. Further, it's found that the civil complaints on food waste management were largely categorized into 3 groups - food waste handling, civil service and food waste retrieval. Therefore, the findings indicate that the development and application of no-food waste or waste-to-resource systems are effective in housing estates where large amount of food waste is generated and eliminated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.273-280
• /
• 2010

This study aims to research into a plan for the spatial design on the major facilities in new-town region in Mongolia by using the spatial analytical technique in GIS. In case of Mongolian region, the demand for new-town development is rapidly increasing around Ulaanbaatar, where is the capital. On the other hand, the adequately relevant ground or the spatial-design technique is failing to be applied. This study extracted the region available for developing new down by using spatial analytical technique in GIS, and researched into the spatial-design plan for housing complex, filtration plant, sewage disposal plant, power plant, general park, crematory. The housing complex in the targeted region could be known to be adequate to be positioned around watercourse and road. It could be known to be adequate for filtration plant, which is the source of drinking water, to be located in the upper-stream region of a river, which is secured good quality of water, and for sewage disposal plant to be located in the lower-stream region available for minimizing occurrence of contamination. It is judged to be required for a proposed site of power plant to be located in the upper-stream region, for the park unit, which is space of the living culture, to be repaired and expanded the existing facilities, and for traffic network to be expanded through predicting demand along with new-town development. It is judged to be probably needed to be reflected even the flexible aspect for changing design through surveying the feasibility and economic efficiency on the future spatial design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.336-336
• /
• 2015

일반적인 다목적댐은 홍수 발생 시 본댐으로 유입되는 부유쓰레기 및 잡목 등을 차단하기 위하여 댐 상류에 차단망을 설치하여 1차적으로 사전 방지하고, 홍수기 이후 선박으로 부유물을 수거하여 재활용, 소각 등으로 처리하는 시스템이다. 그러나 본 연구의 대상인 한탄강댐은 홍수조절용 댐으로서 수위 변화 폭이 매우 크고 정상 조건(비 홍수기)시는 대규모 홍수터가 드러나기 때문에 댐 유지관리 방법이 상이하며 한탄강 본류 구간은 하폭과 수심 등 하도의 불규칙성과 만곡부에서 유수의 흐름이 한쪽으로 쏠리는 편기 현상이 발생하는 등 복잡한 수리현상으로 인하여 부유쓰레기의 분포를 판단하기 어려운 지역이다. 따라서 본 연구에서는 부유쓰레기의 유동을 모의하기 위하여 HEC-HMS 모형과 $Vflo^{TM}$ 모형을 활용하여 본류와 지류의 빈도별 홍수량 분석을 실시하고, EFDC 3차원 동수역학 모형을 적용하여 홍수조절용지 내 부유쓰레기의 유입 경로 및 정체 구역을 분석하여 효과적인 쓰레기 처리 방안을 제시하고자 하였다. 분석 결과, 소규모 빈도 홍수(2년, 5년)의 경우 중 상류 지류의 부유쓰레기는 거의 유동하지 못하고 하도의 만곡의 영향을 받아 부분적으로 높은 밀도로 고착될 것으로 모의되며, 특히 본류와의 합류점 부근에 도달한 부유쓰레기는 유로 폭이 급확대되어 유속이 거의 없는 사수역 구간으로 변함에 따라 본류 배수위 영향으로 불규칙하게 맴돌다가 고착되는 것으로 모의되었다. 중규모 홍수(25년, 50년)의 경우, 상류부의 부유쓰레기의 분포는 소규모 홍수 시와 유사한 패턴을 보였으나 중류부에서 홍수파가 본류 하도를 월류하여 홍수터로 넓게 범람하는 지역에서는 소규모 홍수 시 본류 하도 양안에 분포하던 부유쓰레기가 홍수터 쪽으로 밀려가서 고착되는 경향을 보였다. 대규모 홍수(100년, 200년)의 경우, 댐과 인접한 분석 구간 하류부는 댐 배수위의 영향을 가장 크게 받으며 수심이 깊어 흐름이 가장 정체되는 구간으로 본류와 지류 모두 다량의 부유쓰레기가 분포할 것으로 분석되었다. 분석 구간 중류부는 홍수 규모가 증가함에 따라 넓은 홍수터로 침수범위가 급격하게 증가하며 이에 따라 부유쓰레기가 분포할 수 있는 면적이 크게 증가할 것으로 분석되었다. 또한 분석 구간 상류부는 협곡을 이루고 있어 홍수규모가 증가하더라도 침수범위와 부유쓰레기의 분포면적에 큰 변화가 없을 것으로 분석되었다. 본 연구 결과를 바탕으로 댐의 치수 문제가 발생하지 않도록 효과적으로 수거 처리 할 수 있는 부유쓰레기 적치장 및 차단 시설의 적정 설치 위치를 파악하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.197-197
• /
• 2019

총인처리시설에서는 응집제를 주입하여 인이나 오염물질을 침전시켜 처리하고 있으며 PAC(poly aluminum chloride)나 $FeCl_3$, $Al_2(SO_4)_3$, 등 다양한 종류의 응집제가 사용되어지고 있다. 하지만 기존에 사용되어 지고 있는 알루미늄계열의 응집제는 처리수에 잔류이온이 존재하게 되어 인체에 축적돼 알츠하이머 병 등 신체질환을 유발할 수 있는 단점이 있다. 따라서 이러한 단점을 사전에 예방하기 위해 $TiCl_4$와 같은 티타늄계열 응집제에 대한 연구가 진행되고 있다. $TiCl_4$ 응집제는 인 제거에 효과적으로 적용할 수 있으며 수중에 잔류이온을 유발하지 않으며 Ti이온은 치과임플란트나 의료장비로 사용될 만큼 인체에 무해하다고 알려져 있다. 응집제 사용에 따라 생성된 응집슬러지의 처리방안에 있어서 기존 응집제의 경우 생성된 슬러지의 대부분은 하수슬러지 위탁처리업체를 통해 소각 및 매립, 재활용 되고 있으나, $TiCl_4$를 응집제로 사용할 경우 생성된 슬러지를 인발하여 건조 및 소성을 통해 이산화티타늄으로 재활용할 수 있어 슬러지를 친환경적으로 처리가 가능해 기존 슬러지 처리방안의 경제적, 환경적 부담을 줄일 수 있는 장점이 있다. 따라서 본 연구에서는 $TiCl_4$를 하수처리장 방류수에 주입하여 수중의 총인(T-P)을 처리한 후 생성된 슬러지를 인발하여 건조와 소성과정을 거쳐 이산화티타늄을 제조하였다. 방류수를 취수해 2.5mg/L의 초기 총인 농도를 가진 원수를 제조하였으며 제조된 원수에 $TiCl_4$를 0.6mL 주입하였을 때 99.93%의 총인제거효율을 얻을 수 있었다. 응집 실험 후 생성된 슬러지를 인발하여 건조 후 $300{\sim}1000^{\circ}C$의 각각 다른 온도조건에서 소성하여 이산화티타늄을 제조하였으며, SEM과 XRD를 통해 제조된 이산화티타늄의 표면특성과 결정성 분석을 실시하였다. 제조된 이산화티타늄은 $500{\sim}800^{\circ}C$에서는 아나타제, $900{\sim}1000^{\circ}C$에서는 루타일 결정구조가 나타났다. 또한, $TiCl_4$ 주입량에 따른 이산화티타늄의 최종 생산량과 제조 시 사용되는 건조로 및 소성로의 경제적 비용 등을 고려하여 이산화티타늄 1Ton을 제조하기 위해 필요한 단가를 산출하였다. 본 연구에서 제조된 이산화티타늄 1kg의 생산단가는 약 5,400원으로 나타났으며, 가장 많이 사용되는 P-25 광촉매 보다 저렴한 가격으로 제조 및 판매를 기대할 수 있다. 따라서 하수처리장에 적용 시 기존 응집제 보다 비싼 $TiCl_4$ 비용을 보완하고 친환경적인 슬러지 처리로 제조된 이산화티타늄의 유통 및 현장적용을 통해 경제적, 환경적으로 우수하다고 판단된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.5-12
• /
• 2019

The study is carried out to survey the proper management and to propose an eco - friendly separation system through efficient screening and resource recovery of excavated materials containing waste from various excavating fields such as reconstruction of landfill sites for reuse, reclamation of unsanitary landfill and residential land development of waste dumping sites. The current status and screening process and analytical characteristics of the excavated materials containing waste were reviewed. Through the analysis of the samples such as separated combustibles, recyclable soils and residues collected from the on-site visits we were able to understand the characteristics of separated materials and excavated materials containing waste such as calorific value, elementary composition, TOC, foreign material content and LOI. It has been found that elimination of the moisture of excavations, removal of attached soil from the surfaces of the excavated combustibles and the quantitative supply method of the input devices are the main operating factors as essential factors for the optimal separation of excavated materials containing waste. For efficient management and recycling of excavated materials containing, it is necessary to set criteria of ash content in separated combustibles and criteria organic matter content in separated soils.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.409-415
• /
• 2021

Medical waste management is becoming increasingly important, specifically in light of the current COVID-19 pandemic, as hospitals, clinics, quarantine centers, and medical research institutes are generating tons of medical waste every day. Previously, a traditional incineration process was utilized for managing medical waste, but the lack of landfill sites, and accompanying environmental concerns endanger public health. Consequently, an innovative sterilization shredding system was developed to resolve this problem. In this research, we focused on the design and numerical analysis of a shredding system for hazardous and infectious medical waste, to establish its operational performance. The shredding machine's components were modeled in a CAD application, and finite element analysis (FEA) was conducted using ABAQUS software. Static, fatigue, and dynamic loading conditions were used to analyze the structural stability of the cutting blade. The blade geometry proved to be effective based on the cutting force applied to shred medical waste. The dynamic stability of the structure was verified using modal analysis. Furthermore, an S-N curve was generated using a high cycle fatigue study, to predict the expected life of the cutting blade. Resultantly, an appropriate shredder system was devised to link with a sterilization unit, which could be beneficial in reducing the volume of medical waste and disposal time, thereof, thus eliminating environmental issues, and potential health hazards.