• Journal of the Korean Society of Visualization
• /
• v.13 no.2
• /
• pp.33-37
• /
• 2015

매년 장마철에는 수막현상으로 인한 교통사고가 빈번하게 발생한다. 본 연구는 수막 형성 억제를 위해 타이어 앞부분에 설치되는 공기 분사 장치의 성능을 평가하는 것으로서, 공기 분사에 의한 수막 형성 억제를 모사할 수 있는 실험 장치를 제작하고, 수막 형성 억제 과정을 가시화하여 공기 분사 장치의 성능을 파악하고자 한다. 실험 변수로서 노즐의 형상 3가지와 수막에 대한 분사각 3가지에 대해 상세히 그 영향을 조사하였으며, 그 결과 분사각은 10도(지면에 대해서는 80도), 노즐 형상은 일자형일 때 수막 억제 효과가 가장 큰 것으로 파악되었다.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.187-189
• /
• 2010

모바일 그리드 환경에서 작업 처리를 위해 노드로 활용되는 모바일 장치는 무선 인터넷 연결과 모바일 장치의 배터리 용량 등의 제약으로 인해 모바일 그리드 환경에서의 작업 처리는 기존 그리드 컴퓨팅 환경에 비해 신뢰성이 낮고 결함이 발생할 확률이 높다. 따라서 모바일 장치의 신뢰성을 고려한 작업 분배 방법이 요구된다. 이 논문에서는 모바일 장치의 신뢰성을 고려한 작업 분배 스케줄링을 제안하고자 한다. 제안 기법에서는 노드의 신뢰성을 바탕으로 작업량과 복제 개수를 서로 달리 설정하여 신뢰성이 우수한 노드에게 더 많은 작업량을 할당하고 작업 복제 개수를 적게 설정하도록 한다. 제안 기법의 타당성을 보이기 위한 성능 평가에서는 제안 기법이 기존 기법에 비해 성능이 향상됨을 보여준다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.738-744
• /
• 2017

Recently, the installation of energy storage systems (ESSs) has increased in parallel with the extension of renewable energy resources. However, there has been no concrete analysis ofthe performance verification and economic evaluation of ESSs,which makes it difficult to perform aneffective installation and operation of an ESS. In particular, there are no international technical standards and guidelines on electric ESS for frequency regulation applications. Therefore, acomprehensive study on the power quality, impact on grid, extent of contribution, and cost benefit study of ESS are strongly being required. Under these backgrounds, this paper proposes a performance verification algorithm on ESS for frequency regulation application based on ananalysis of the AGC(Automatic Generation Control) performance verification method of PJM in USA. In addition,this paper proposes an economic evaluation algorithm on a 500 MW installation of ESS for frequency regulation applications using the account settlement of an expensive gas-fired generation plant and coal-fired power generation plant. From the simulation with real ESS operation data and 500 MW installation case, it wasconfirmed that the ESS showssuperior performance toany other conventional generators and provides anannual benefit of 500 MW ESS are between 345~429 billon won.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.232-240
• /
• 2018

This study is to suggest a method to evaluate the detector performance using change of absorbed dose and histogram according to sensitivity change of Auto Exposure Control(AEC). The experiment site is skull, abdomen pelvis and the accuracy of the detector was evaluated by measuring the absorbed dose of the detector sensitivity S200, S400, S800, S1000. Also the dynamic range of the detector was evaluated through the histogram analysis. As a result, the absorbed dose decreased gradually as the sensitivity was set higher from S200 to S1000. And through the sensitivity histogram analysis, as the sensitivity of the skull is set higher, the amount of information at both ends of the histogram is lost. Abdomen and pelvis areas showed underflow phenomena in which the amount of information in the first part of the histogram was lost as the sensitivity was set higher. In conclusion, the detector accurately implemented the sensitivity change, but the dynamic range of the image due to the sensitivity change of the AEC due to the deterioration of the detector performance can not be realized properly and it was found that the evaluation through the absorbed dose and the histogram is useful when evaluating the performance of the detector.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.336-340
• /
• 2010

Flash storages are prevalent as portable storage in computing systems. When we consider the detachability of Flash storage devices, data integrity becomes an important issue. To assure extreme data integrity, file systems synchronously write all file data to storage accompanying hot write references. In this study, we concentrate on the effect of hot write references on Flash storage, and we consider the effect of absorbing the hot write references via nonvolatile write cache on the performance of the FTL schemes in Flash storage. In 80 doing, we quantify the performance of typical FTL schemes for workloads that contain hot write references through a wide range of experiments on a real system environment. Through the results, we conclude that the impact of the underlying FTL schemes on the performance of Flash storage is dramatically reduced by absorbing the hot write references via nonvolatile write cache.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.103-108
• /
• 2014

The flash memory which is exploited on hand-held devices such as smart phones is a non-volatile storage and has the benefit that it can store mass data at a small sized chip. To process queries on the mass data stored in the flash memory, the index scheme should be exploited. However, since the write operation of the flash memory is slower than the read operation and the overwrite is not supported, it is required to reevaluate the performance of the index and find out the drawbacks. In this paper, we evaluate the performance of a space division typed index scheme on the flash memory. To do this, we implement the fixed grid file and measure the average speeds of the query and update processing on a various condition and compare the value of the flash memory with that of the magnetic disk.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.171-172
• /
• 2015

PMU (Phasor Measurement Unit)는 전력시스템의 노드에서 실시간으로 시간 동기화된 페이저 정보를 측정하여 전력계통 모니터링을 가능하게 하는 장치이다. 이 때, PMU가 모니터링 장치로서 활용되기 위해서는 고신뢰도의 페이저 정보 측정이 요구된다. 기본적인 페이저 추정기법은 푸리에 변환을 이용하여 정현파 신호의 기본주파수 성분을 분석하는 것으로 본 논문에서는 푸리에 변환 기반 페이저 추정기법과 웨이브렛 기반 페이저 추정기법의 성능을 분석하여 웨이브렛 기반 페이저 추정기법의 타당성을 검토하고자 하였다. 페이저 추정기법의 평가에는 IEEE 표준에 따른 TVE (Total Vector Error) 개념을 사용하며 정현파 신호의 진폭변화와 위상변화 및 잡음발생 환경의 진폭변화에 대하여 페이저 추정 기법들의 성능평가로 신뢰성을 확인하였다.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.1-9
• /
• 2016

For underwater steel structure, cut that underwater shaped charge device that combines a spring hose, which is an external device of pressure resistance and flexibility with flexible shaped charge, was invented. As a basic experiment for an optimum condition design, an penetration performance was compared by external device shape. To evaluate the result of an experiment, image analysis was carried out after obtaining the model by using the liquid rubber for the penetrated steel plate. To simulate the penetrating process of shaped charge, the AUTODYN program has been used. As a result of analysis, while the average penetration depth of circular and square shaped external devices were similar, the penetration quality was more uniform in the case of circle. In addition, water infiltration occurred in square case, displacement and strain rate according to the increase of the water pressure were measured high.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1454-1460
• /
• 2006

This paper assesses communication performance using a roaming simulator when roaming occurs between onboard and ground wireless communication devices for communication based train control system (CBTC). Generally, CBTC is defined as the system regularly collecting location and speed data from each train, transmitting distance information to a train, and optimizing train speed according to train performance. When a train is moving, roaming is also performed to continuously transmit and receive train control information between the ground controller and the train. To operate CBTC, packet loss rate should be less than 1%, roaming time less than 100ms during roaming. We developed a roaming simulator to check communication performance before installing ground and onboard equipments on actual wireless sections. The roaming simulator to be introduced in this paper is for roaming simulation before conducting CBTC field test, which is the project to develop Urban Rail Signaling System Standards, being conducted in KRRI. The simulation consists of one onboard wireless communication device and three ground wireless communication devices, and the roaming simulator estimate packet loss rate occurring during roaming process of the two devices. Therefore, if you use the roaming simulator before the field test, you can predict various problems to occur in actual environment and reduce time, cost and people necessary to resolve these problems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1337-1344
• /
• 2023

We aim to find out the effectiveness of performance evaluation to ensure safety of performance through development of high-frequency electrode probes, evaluation test protocol and evaluation simulator that is essential to ensure safety in performance evaluation and reliability evaluation of high-frequency electrode probes for underwater therapy used with high-frequency electrosurgical equipment.