• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1041-1042
• /
• 2011

저압 차단기의 단락성능평가를 위한 단락시험설비의 측정시스템은 고전압, 대전류를 안전하고 정밀하게 측정하기 위해 여러 가지 측정기들로 시스템으로 구성되어 있으며, 시험 신뢰도의 확보를 위해 측정불확도에 대한 평가가 이루어져야 한다. 본 논문에서는 표준 Shunt와 비교시험을 통하여 전류 측정 시스템의 측정불확도를 추정하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.190-191
• /
• 2006

전력수요의 급속한 증가에 따라 우리나라 전력계통은 수송밀도가 증가되고 광역화되어 과거에는 가능성이 비교적 낮았던 미국 등 구미 선진국 형 전압안정도 문제의 출현의 가능성이 점차 높아지고 있다. 본 논문에서는 전력계통의 안정도 확보를 위한 무효전력 성능시험의 추진내용과 진상/지상 무효전력의 제한기능 및 실제 운전 중인 발전소의 발전기를 대상으로 성능시험을 통한 무효전력의 공급가능 능력을 검증한 내용을 기술하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.30-32
• /
• 2015

최근 대형 여객선 및 소형 낚시선 등의 전복사고 사례가 급증하고 있으며 이는 많은 인명사고와 함께 큰 경제적 손실로 이어지고 있다. 이로 인해 선박의 복원 안정성에 관한 관심이 더욱 높아지고 있다. 본 논문에서는 모형선의 복원력을 계측하여 평가 할 수 있는 복원성 시험 도구로서 복원력 계측 장비를 개발하였으며 성능 평가를 함께 실시하였다. 성능평가는 이론적 계산과 시험 결과의 비교분석을 통해 이루어졌고, 이론치와 상용프로그램 및 시험치 결과와의 오차가 각각 0.04%, 3.7%로 양호한 일치를 보여주고 있다. 이와 같이 4%이내의 매우 낮은 오차로 나타남으로서 본 계측 장비의 정밀성과 유용성을 확인할 수 있었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.67-68
• /
• 2013

본 연구는 국내 전체 화재발생 건수에서 가장 높은 비율을 차지하고 있는 주거공간에 대한 화재 및 인명안전의 개선 대책에 관한 기초연구이다. 주거공간은 다른 어떠한 방호공간보다 가장 높은 수준의 안전이 요구되는 소방대상물이다. 국내의 주거공간을 대표하는 공동주택의 안전을 확보하는데 가장 중요한 역할을 하는 것이 화재감시시스템이며 이를 구성하는 요소 중에서도 감지기의 성능이 가장 중요한 역할을 한다. 감지기의 성능은 인간의 두뇌와 같은 기능을 하기 때문이다. 이미 일본의 경우는 공동주택 전용의 화재감시시스템을 개발하고 기준으로 제정하여 널리 보급하고 있는 실정이다. 또한 미국은 공동주택 전용의 화재감시시스템이 별도로 존재하지는 않지만 화재특성 및 화재하중 등에 대한 시험을 통해 다양한 방호공간을 효율적으로 적용할 수 있도록 상세한 코드가 정립되어 있다. 따라서 본 연구에서는 국내 공동주택에 적합한 전용 화재감시시스템을 개발하는데 필요한 기초 연구로서 국내와 방재선진외국의 감지기 설치 및 성능을 검증하는데 필요한 설치 및 시험 기준에 대하여 조사하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.90-97
• /
• 2002

In this paper we study the performance test items and improvement plans of surge protective devices for low-voltage power circuits used in railway system. Above of all, the sources of electromagnetic interference in railway system are researched. And then we compared domestic railway standard with IEC and IEEE standards far the test items and methodologies of surge protective devices. Through the investigations, we found that the domestic standard is behind in the number of test items and methods on surge protective devices. As the countermeasures, we suggest removing component tests of surge protective devices, separating standards for power and signal standards, and using international surge waveform. In applying to domestic railway surge protective devices, surge limiting voltage measuring and surge endurance tests by international standard methods are good result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.857-865
• /
• 2006

In order to test and evaluate the various functions and services of NGN would be promised, a specified methodology is needed and a development for the identification of testing object, configuration and test traffic are required. Simulation and analytical modeling methodshave used for IP performance testing, but further study issue still remains. This paper proposes new evaluation methodology to achieve an objective approach rather than a subjective and isolated, based on the real-field environment, for NGN network. For this purpose, background traffic pattern to interfere test traffic was specified and it was tested in actual NGN testbed with systems having NGN technology, such as per bandwidth and packet size. The results shows the suggested methodology is appropriate, comparing with parameters which are Delay, Jitter and Loss the current approach for the end-to-end performance evaluation on NGN.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.70-75
• /
• 2009

In this experiment, we did sampling 6 kinds of photovoltaic modules and analyzed the discrepancy of measurement results between l laboratory and 4 PV makers to have performance repeatability at Standard Test Condition(STC) condition. From the KIER's results, Korea's standard test laboratory, other laboratory showed -10% measurement variation. The causes came from correction of reference cell, test condition and the state of skill. Form the comparison test, we analyzed the problems. But three PV maker reduced measurement variation, other one PV maker and one test laboratory didn't improve the problems of correction of reference cell, test condition and the state of skill. Also, High Efficiency Module had a big discrepancy of -10.0$\sim$-6.2% among 3 laboratories which have a less than 10msec light pulse duration time. This made low spectrum response speed so the Fill Factor decreased maximum output power under 10msec light pulse duration time

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.119-126
• /
• 2005

The objective of this paper is to investigate the lining board's capacity for the static load. The test is to inspect the possibility of retrofit and efficiency, which is required to upgrade the structure's capacity and to examine the effects of the improvements of specimen by using structural analysis, and static loading test, respectively. As the result of static loading test for measured stresses and deflections. H type lining board take sufficient load carrying capacity and high stiffness which likes ultimate load, displacement, and bending stresses of intermediate span and top, bottom flange more than 3 times channel type lining board.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2023

In this study, reliability tests of torsion control expansion anchors according to drill bit diameters were performed. The standard deviation and coefficient of variation of the anchor were reviewed through the tests for each variable, and the results were compared and evaluated with the standard test results. As a result of the reliability test of the M12 and M16 anchors with 1.04 times the drill bit diameter, they were within 20% of the ultimate tensile load permissible standard coefficient of variation. It was found that the pulling-out performance of the anchor installed in the large hole was sufficiently secured. However, it was found to be about 253% and 210% of the design strength, indicating that the pulling performance of the anchor installed in 1.04 times the drill bit diameter was sufficiently secured. As a result of the reliability test of the M12 and M16 anchors with 1.02 times the drill bit diameter, the value of the coefficient of variation of the ultimate tensile load limit was within 20%, which satisfies the test standard. It was shown to be about 136% and 168% of the design strength, indicating that the pulling-out performance of the anchor installed in 1.02 times the drill bit diameter is sufficiently secured.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.34-42
• /
• 2002

This research was carried out to investigate water repellent effectiveness of natural oil treated wood. Linseed oil, castor oil, olive oil, bean oil, perilla oil and sunflower oil were used in this test. For evaluation of water repellent of natural oil treated wood, moisture absorption test, water-drop contact angle test and color difference test of accelerated decomposition by UV and water were used. The moisture absorption amount of natural oil treated wood was less than untreated wood until 3 hours, but it was increased with time, there was no big difference with oil treated wood and untreated wood after 48hours. Oil treated wood and untreated wood showed big difference on contact angle test. It was no big difference by kind and oil concentration. Natural oil treated wood did not showed stability on the weather aging test. Contact angle test could be used on evaluation of wood surface status treated with natural oil.