• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제4권2호
• /
• pp.83-87
• /
• 2011

Clock selection has a significant impact on the performance and quality of designs in high-level synthesis. Almost systems require that the clock length is required prior to scheduling, the best value of the clock can be found only after evaluating different schedules. In this study, we presents a scheduling method that works simultaneously with synthesis by selecting a clock from a chainable operation set. Our scheduling algorithm is based on list scheduling and executes chaining considering bit level delays based on selected clock period. Experimental results show that our method improves the performance by 18 percent.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제4권3호
• /
• pp.1-10
• /
• 2000

In order to predict the performance of subsonic/sonic ejector system and to provide fundamental data for a cost effective design, one dimensional gas dynamics theory was applied to the subsonic and sonic ejector systems with the second throat. In the current theoretical analyses, ejector throat area ratio, mass flow ratio and secondary stagnation pressure were derived as a function of the operating pressure ratio of the ejector, and the discharge coefficient of the primary nozzle and the loss coefficient of the diffuser were incorporated into the whole performance of the ejector system. The results of theoretical analysis can be applied to practical industrial use of subsonic and sonic gas ejector systems.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제8권1호
• /
• pp.46-52
• /
• 1994

In this paper, we implemented the variable speed controller of an induction motor by the Fuzzy control algorithms, which recently is invoking the remarkable interest. As the fuzzy controller is designed on the base of expert's knowlede and experience, it is difficult to expect the perfect control performance of fuzzy controller. Therefore, the adjustment techniques for optimization of scale factors were presented to design the robust fuzzy controller comparing with conventional PI control the usefullness of proposed fuzzy controller was showed by the experimental results.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2708-2710
• /
• 2003

본 논문에서는 배전 계통의 고압선로를 이용한 전력선 통신 시스템을 설계하고 기초시험을 수행한 연구를 소개한다. 설계, 개발된 시스템은 450kHz이하의 저주파 대역을 이용하여, 수kbps의 전송 성능을 가진다. 아울러 수십 km정도의 길이를 갖는 배전 선로를 따라 고루 분산된 제어 노드들을 효과적으로 연결하기위하여 약 십km정도의 전송거리를 가지며, 중간 노드에서 중계시 수십km까지 가능하다. 이를 위하여 고압 커플러, 임피던스 정합장치, 고출력 앰프 등을 제작하고 그 성능 특성을 보였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.220-221
• /
• 2019

At a time when the recent earthquake in Pohang, Korea requires the need for seismic performance design not only for concrete structures but also for construction materials used in construction structures, the possibility of applying the seismic performance design of waterproof materials constructed in the form of direct or partial adhesion to concrete structures in the underground Single-side walls section was confirmed.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제8권1호
• /
• pp.17-27
• /
• 2004

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer. such as ductility limit on each member, the design concept of strong column - weak beam, and etc. In addition, through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy. As the result. economical and safe design can be achieved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제39권3호
• /
• pp.269-278
• /
• 2011

The details of engine manufacturer's engine simulations are generally kept secret and only those parameters that are used for control purposes are accessible to users. Hence, there is often only a limited amount of data accessible for creating a performance model of the engine. The performance modeling of a low bypass turbofan engine for supersonic aircraft is described herein. The Pratt and Whitney F100-PW-229 engine has been employed for low bypass turbofan engine performance modeling. Published data from the open literature are used as initial data for building the F100-PW-229 engine performance model. The unknown components' characteristics were estimated by optimization of parameters using by adaptive random search method and sensitivity analysis with respect to design variables. The engine performance model was evaluated to be properly constructed through the comparison of result of engine performance analysis and engine deck data.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제19권5호
• /
• pp.71-77
• /
• 2015

Internal ballistics is a phenomenon happened in tens of milliseconds during the gun firing. The configuration variables of the solid propellant are important factors which have influences on the performance of the gun system. In this study, the performance analysis of the 7-perforated propellant has been conducted using the numerical program for the interior ballistics. The effect of the configuration variables on the gun system performance has been analyzed. The propellant design has been conducted for the satisfaction of the performance requirements. As results, the relationship between the configuration variables and the performance has been obtained and the basic design concept of the multi-perforated propellant has been provided.

• Journal of Ocean Engineering and Technology
• /
• 제11권3호
• /
• pp.180-190
• /
• 1997

잠수함이 저심도 조건에서 특수임무 수행시, 표면파도 및 조류등 외란의 영향하에서 요구심도 및 위치 유지를 위한 강인한 자동항법장치 설계는, 첨단 군용 잠수함 개발에 필수적이다. 본 연구는 잠수함 조종 운동역학계에 기초하여, 정확한 심도 및 피치 운동 제어를 위해 선형 행렬 부등식을 이용한 혼합 $H_2/H_{\infty}$ 설계법을 사용, 다중 목적 함수로 표현된 잠수함의 조종성능들을 개선하였다. 또한, 제어기 설계법의 타당성을 수치 시뮬레이션을 통하여 검증하였다. 결과적으로 본 제어법은 각종 외란 및 계의 불확실성하에서 잠수정의 만족스러운 과도 상태 응답과 일정 심도 유지 및 피치 각도 변동 최소화에 적합한 강인한 방법임이 검증되었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제4권2호
• /
• pp.61-67
• /
• 2001

Development of a barrier system for floating debris at river is introduced. The system is to prevent pollution of coastal water caused by marine debris which originates from land. The system consists of harrier boom, mooring system and boom winder. The harrier boom, which is self-inflatable with circular band spring, guides floating debris to a collecting conveyer system. Design parameters of the harrier system were reviewed and its design criteria were established. Based on the established design criteria, a pilot harrier system was built and tested at Tanchon branch of the Han river. It is proved that the suggested system is very efficient to collect floating debris at river.