• Title/Summary/Keyword: 섬유의 흡습성

Search Result 27, Processing Time 0.025 seconds

다관능성 에폭사이드로 처리한 모직물의 구김회복성에 관한 연구

  • 문수진;강태진
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.334-337
    • /
    • 1998
  • 양모는 흡습성과 보온성이 우수하고 위생적이며 염색성도 좋아서 고급 의류의 소재로서 오랫동안 이용되어 왔다. 그러나 최근 의복의 경량화와 밝은 색상 선호에 따른 구김 발생문제가 대두되면서, 구김을 제거하기 위한 다양한 연구들이 진행되고 있다. 섬유의 구김회복성을 증진시키기 위한 연구의 일환으로 견이나 양모에 있어서 에폭사이드 화합물 처리에 관한 여러 논문들이 발표되고 있다[1-4].(중략)

  • PDF

Linen-like Finishing of Cotton Fabric Using N-Methylmorpholin N-Oxide (N-Methylmorpholin N-Oxide를 이용한 면직물의 의마가공)

  • 손현식;김진호;윤경훈;이양헌
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2002.04a
    • /
    • pp.281-284
    • /
    • 2002
  • 마 섬유는 흡습성이 좋고 건조가 빠르고, 습윤 시 강도가 증가되며 열전도율이 크고 통기성이 크며, 강도와 내열성이 천연 섬유 중 가장 우수하며 매끄러운 표면을 가지고있어서 광택과 방오성이 좋다. 그러나 세사방적이 어렵고 강연도가 지나치게 커서 의복소재로서 극히 제한적으로 사용되어왔으나, 최근에는 큰 강연도를 장점으로 활용하여 여름용 의복소재로 다시 각광받고 있다. 따라서 면, 레이온, 셀룰로오스계 섬유제품들에 대하여 마 제품과 유사한 효과를 낼 수 있는 다양한 의마가공법이 개발되어왔다[1,2]. (중략)

  • PDF

Physical Properties of Fabric E-Glass Fiber Reinforced Laminated Timber (II) - Peeling and vapor adsorption properties - (직물유리섬유강화 집성재의 물리적 특성(제2보) - 박리 및 흡습성 -)

  • Jung, In-Suk;Lee, Weon-Hee;Kim, Jong-Man
    • Journal of the Korean Wood Science and Technology
    • /
    • v.31 no.5
    • /
    • pp.35-42
    • /
    • 2003
  • This study was conducted to estimate peeling and vapor adsorption properties made with fabric glass fiber reinforced laminated timber according to our earlier report(Jung et al., 2002). In adsorption peeling test, three all types solid wood were not appeared the peeling. However, solid wood appeared to the peeling in boiling peeling test except for control wood. Vapor adsorption test was performed at 40℃, 90% relative humidity for 48 hours. Cross sections were not different all solid wood. Radial section and tangential section with glass fiber were delayed vapor adsorption compared to control wood. In anisotropy of vapor adsorption, solid wood with glass fiber were small values.

액체 암모니아 처리 면직물의 물성 및 염색성

  • Lee, Chang-Soo;Im, Yong-Jin;Jeon, Sung-Ki;Lee, Chung;Kim, Tae-Kyung
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2003.04a
    • /
    • pp.137-143
    • /
    • 2003
  • 수산화나트륨을 이용한 면의 머서화 가공은 광택, 염색성의 향상, 치수안정화, 흡습성의 증가, 강력의 향상 등의 장점에 의해 면의 가공에 있어 일반적 공정이 되었다. 그러나 일반적으로 행해져온 상온에서의 수산화나트륨에 의한 머서화는 점도가 높아 섬유내부까지는 침투가 어려워 직물의 표면만이 강하게 머서화되어 태가 딱딱해진다는 결점이 있다. 이에 비해 고온에서 머서화를 할 경우 섬유의 내부까지 알칼리의 침투가 용이해지고 균일한 처리가 가능하다. (중략)

  • PDF

새로운 재생셀룰로오스 섬유$(enVix{\circledR})$의 직접 염료에 대한 염색성

  • 심우섭;고준석;김성수;김재필;김익수
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2003.04a
    • /
    • pp.78-82
    • /
    • 2003
  • 셀룰로오스계 재생섬유 중 가장 먼저 개발된 Viscose rayon은 셀룰로오스 펄프를 17-18%의 가성소다 수용액에 팽윤시켜 알칼리 셀룰로스를 만든 뒤 이황화탄소(CS$_2$)에 반응시킨 후 방사하여 제조하며 흡습성, 제전성, 드레이프성 및 광택이 우수한 쾌적성 섬유이다. 그러나 탄성 회복율이 좋지 않으며 강력이 적고 특히 습윤시의 강력 저하의 단점이 있을 뿐만 아니라 제조과정에서 사용하는 이황화탄소의 환경 유해성이 큰 문제점으로 지적되고 있어 선진국들이 점차 설비를 폐쇄하거나 개도국으로 이전하고 있는 실정이다. (중략)

  • PDF

합성 방법에 따른 PET-PEG 블록 공중합체의 생성효율

  • 박영효;최경림;조창기
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.80-84
    • /
    • 1998
  • Poly(ethylene terephthalate)(PET)는 물리적, 기계적 성질이 우수한 고결정성 고분자의 하나로 섬유, 필름 및 여러 가지 용도로 다양하게 사용되고 있으나, 일반적으로 흡습성, 난연성 및 염색성 등이 좋지 않은 결점이 있다. 따라서 이러한 결점을 개선하기 위하여 PET 자체의 성질을 개선하거나 다른 고분자와의 공중합 또는 블렌딩하는 방법, 첨가제의 도입, 그래프팅 등 PET의 개질 연구가 많이 수행되고 있으나 대표적인 방법으로 합성반응시 공단량체를 사용하여 공중합체를 제조하는 것이 널리 알려져 있다.(중략)

  • PDF

Studies on Sericin Fixation by Use of Alum Meal (명반처리에 의한 견직물개선연구 -Sericin 정착을 중심으로 하여-)

  • 최병희;남중희
    • Journal of Sericultural and Entomological Science
    • /
    • v.21 no.2
    • /
    • pp.11-19
    • /
    • 1979
  • This has been carried out how the sericin insoluble fixations of raw silk should be with potassium alum. This is learned from the leather tanning technique which the process works with collagen, a kind of proteins. Former reports had shown such works, however, they did not consider the moisture absorbability after their process reports by using chromium alum, formalin or vinyl acetate grafting. This report, however, paid attention to protect such absorbability as well as sericin fixation, so far it may be useful for plactical use of silk. In order to clear how the sericin is fixed with such chemicals, fundermental mechanism of weding process and chemical reaction against proteins were also discussed. The obtained results of the report are as followings. 1. Alum should not be treated for raw silk with high temperature bath like other reports because such treat induces raw silk to be stiffly after the treat. 2. It is recommended that raw silk should be treated with alum solution at room temperature for more than three hours. Even in this case, the use of only alum with raw silk could to fix sericin some how, but it increased the water proofness of the silk. 3. 1% of alum solution was found to be able to fix the sericin of raw silk. 4. In case we consider only sericin fixations, a combination treat of 1% alum for three hours and 0.5% NaOH for ten minutes method showed the best result. 5. In case we consider sericin insoluble fixation and moisture absorbility, the reversive combination of the above process was found to be the best results. 6. Sericin fixing evidence was shown with drying feature curves of wed each treated silk where we could to analyze how the chemical nature is changed after each treat. 7. Deguming ratio may be obtained up to 4.3% after the alum combination treat with regular raw silk. Such ratio was considered to be good enough for the purpose when the textile is washed with warm soap water. 8. Moisture absorbability of the combination treat of alum and NaOH was found to be good enough as well as non treated silk. 9. The tenacity and elongation of the treated silk did not change even after three month. 10. Above all, this method is considered to be better process than other coloured fixing (tannin method. Cr-alum method) or smell fixing (formalin method. vinyl acetate method).

  • PDF

Analysis and Properties of Poly(ethylene 2,6-naphthalate) Copolymer Using Poly(ethylene glycol) (폴리에틸렌글리콜을 이용한 폴리에틸렌나프탈레이트 공중합체의 분석 및 특성)

  • 손준식;지동선
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2003.04a
    • /
    • pp.343-344
    • /
    • 2003
  • 폴리에틸렌 나프탈레이트(PEN)는 열적 및 물리적 특성이 우수한 고분자로서 포장재료, 필름, tire cord 등으로 그 이용범위가 확대되고 있는 고분자이다[l]. 그러나 강직한 분자사슬을 가지고 있는 PEN은 고결정성과 소수성 둥으로 인해 흡습성, 제전성 및 염색성이 좋지 못하고 성형가공이 어려운 단점도 있다. 이미 동종계열인 PET의 경우 그러한 단점을 개선하고자 합성반응시 diol과 같은 제 3의 단량체를 사용하여 공축합하는 연구[2-3]가 시도된바 있으나 PEN의 경우 아직 이에 관한 연구보고가 없는 실정이다. (중략)

  • PDF

전해수 특성 및 전해수와 초음파를 이용한 PET의 가수분해

  • 최용철;홍영기;채경수;배기서
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2003.04a
    • /
    • pp.144-148
    • /
    • 2003
  • 현재 섬유 분야에서 많은 부분을 차지하고 있는 폴리에틸렌테레프탈레이트(Polyethylene terephthalate, PET) 섬유는 강도, 혼방성, 내열성 등이 우수한 반면, 염색성, 필링성, 흡습성, 대전성 등의 결점들을 가지고 있어 이러한 단점들을 개선하려는 연구가 현재까지 지속적으로 진행되어 오고 있다 PET의 개질 방법 가운데 촉감개선을 위한 알칼리 감량 가공은 영국에서 처음으로 시도되었고, 1970년대 중반 이후 일본에서 공업화시켰으며 현재에도 가장 널리 사용되고 있는 방법 중의 하나이다. (중략)

  • PDF