• Composites Research
• /
• v.24 no.6
• /
• pp.31-36
• /
• 2011

According to the evaluation on GMT-sheet by molding conditions, fiber projection on the moldings surface was investigated. Fiber projection is one of the major defects on moldings surface due to matrix shrinkage. That is, fiber projection happens from different shrinkage of matrix and glass fiber. Height of fiber projection from moldings surface becomes smaller when molding pressure is higher during holding pressure and cooling process. Height of fiber projection is dominantly affected by molding pressure. With consideration of molding pressure, the formation of surface unevenness and change in fiber projection height was elucidated. In addition, coating layer is effective to suppress surface defects, and there is no fiber projection or crack in case that coating is applied. Coating layer improves surface roughness up to the level of the polypropylene which is a single material.

• Science of Emotion and Sensibility
• /
• v.1 no.2
• /
• pp.55-63
• /
• 1998

섬유 패턴 디자인을 체계적이고 객관적으로 기술할 수 있는 도구를 패턴 디자인의 지각적 속성에 기초하여 개발하였다. 세 단계로 이루어진 연구의 첫 단계에서는 패턴 디자인의 단계를 실제 디자인 과정에 기초하여 'PP의 디자인', 'RPU의 디자인', 'RPU의 배열'의 순서로 개념화한 후, 이 데 영역에 걸쳐 30개의 지각적 특징들을 추출하였고, 섬유 패턴 디자인을 충실히 기술할 수 있다는 것을 확인하였다. 다음으로 추출된 30개의 지각적 특징들을 'PP의 모양에 의한 돌출성', 'PP의 색채에 의한 돌출성', 'PP들 모양의 다양성'. 'PP들의 변화도', 'PP들 색채의 다양성', 'RPU의 돌출성', 'RPU의 다양성'이라는 7개의 상위 특징으로 수렴시킨 후, 이 7개의 상위특징들을 다시 'PP에 의한 다양성', 'RPU의 돌출성' 'RPU의 다양성'이라는 4개의 최상위 특징으로 수렵시키는 방식으로 위계화 하여 섬유 패턴 디자인 요소 분석체계를 구성하였다. 또한 대표적인 섬유 패턴 디자인에 대한 이 체계의 기술 가능성을 검토함으로써 본 체계를 수정·보완하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.237-242
• /
• 1998

섬유 패턴 디자인의 감성 예측 모형을 개발하기 위한 전 단계로서 패턴 디자인 요소의 분석체계 개발 가능성을 이론적으로 검증하였다. 먼저 패턴 디자인의 최소 단위를 pattern primitive, 최소반복단위를 Repeated Pattern Unit로 개념화 한 후 'PP들의', 'RPU의',그리고 'RPU간의 특징'이라는 세개 영역에 걸쳐 24개의 지각적 특징들을 추출하였다. 24개의 지각적 특징들은 예비조사를 통해 섬유패턴 디자인을 충실히 기술할 수 있는 것으로 확인되었다. 추출된 지각적 특징들을 'PP의 모양에 의한 돌출성', 'PP의 색채에 의한 돌출성', 'PP들 모양의 다양성','PP들의 변화도', 'PP들 색채의 다양성', 'PRU의 돌출정도', 'PRU의 다양성'이라는 4개의 최상위 특징으로 수렴시키는 방식으로 위계화 하였다.

• Composites Research
• /
• v.23 no.5
• /
• pp.30-38
• /
• 2010

Observing of GMT-Sheet in molding conditions, we have investigated unexpected phenomenons of moldings surface. In microscope investigation, we observe that there exist deficiencies on the surface of GMT-Sheet moldings, such as the spherulite, fiber projection, crack, fiber exposure, micro-weldline, pinhole and winding. They are caused to arise unevenness and phenomenons influence polish on surface. Especially, the major cause of the unevenness, effected to surface roughness, is a shrinking of matrix in the process of holding pressure and cooling temperature. The higher holding pressure load in a molding process and the lower demolding temperature in an annealing experiment, the better GMT-Sheet moldings improved its appearance.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.11-17
• /
• 2004

This study focused on the protection effects of geosynthetics installed on HDPE to resist against puncture loads. The study was conducted by a model test with various types of puncture loads created by different shapes of tools. The puncture resistance of geosynthetics installed as a protective material on HDPE is varied depending on the sizes of geosynthetics and types of puncture loads. In this study, it was found that the protection effect far all kinds of geosynthetics when a truncated cylindrical shape of puncture tool is used is lower than others. Also, geocomposite has the most excellent protection effect against all types of puncture loads.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.183-193
• /
• 1994

인삼(Panax ginseng C.A. Meyer)의 뇌두 캘러스로부터 분리한 원형질체와 배양된 원형질체의 미세구조 변화와 원형질막 표면을 투과 및 주사전자현미경으로 조사하였다. 분리 직후의 원형질체에서는 캘러스세포에서보다 작은 액포들이 많이 형성되어 있었다. 또한 활면소포체의 수가 증가하였으며 이들은 원형질막과 평행으로 배열하였다. 활면소포체는 가끔 세포질을 둘러싸서 세포질분리체(cytosegresome)를 형성하였고, 이 구조는 세포질을 분해시킨 후 액포로 변화하기도 하였다. 배양된 원형질체에서는 분리 직후의 원형질체와 비교하여 조면소포체, 딕티오좀, 리보좀, 미토콘드리아, proplastid 및 액포 등의 수가 현저하게 증가하였다. 딕티오좀으로부터 많은 소낭들이 형성되었고 이들은 세포질 전반에 걸쳐 존재하였다. 때로는 소낭들이 원형질막 바깥으로 돌출되어 돌기를 형성하기도 하였다. 배양된 원형질체의 표면에는 섬유소로 구성되어 있을 것으로 추정되는 섬유상 구조들이 형성되어 있었다.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.231-240
• /
• 1995

This study was conducted to examine early gonadogenesis by using a histological method for the appearance of primordial germ cells (PGCs), protrude of genital ridge, and formation of primitive gonads in diploid and triploid mud loach, Misgurnus mizolepis. The pattern of early gonadogenesis including appearance of PGCs, formation of genital ridge, and development of primitive gonad in both diploid and triploid were not different histologically. Characteristics of PGCs of triploid were also the same as those of diploid. However, gonadal length of diploid was significantly longer than that of triploid (P<0.05).

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.1
• /
• pp.22-25
• /
• 2014

Fibrous dysplasia(FD) is a benign fibro-ossifying disease in which fibrous tissue replaces normal bone and marrow. Craniofacial bones, including the maxilla and mandible, are commonly involved. A 7 year-old girl visited the clinic with a chief complaint of gingival swelling around the lower left primary molar. Mild bulging of the lower left periodontal tissue was observed. Not only the mandible, but also the maxilla, zygoma, sphenoid, and temporal bones were affected by FD. Permanent tooth germs were involved in the lesions and facial asymmetry was caused by lower left bone expansion. She was scheduled for a follow-up visit at the department of pediatric dentistry and oromaxillofacial surgery.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.310-314
• /
• 2013

A 12-year-old, female mixed breed dog presented with a vaginal mass protruding outside the vulva. The patient was non-gravid, with normal defecation and urination. Serum chemistry revealed azotemia and increased alkaline phosphatase. Hematology findings were normal. Blood electrolytes showed mild hypernatremia. Ultrasonography demonstrated severely enlarged uterine horns, a uterine body with anechoic to hypoechoic fluids, and a focal hypoechoic area within the mass of the right uterine tube. On computed tomography, metastasis was not confirmed. Other computed tomography findings suggested a right ovarian cyst, an enlarged, fluid-filled uterus, and an enlarged vagina with a mass. Ovariohysterectomy, episiotomy, and vaginectomy were performed. The case was diagnosed as uterine tube adenocarcinoma, vaginal fibroma, and pyometra. This case is the first reported concurrent occurrence in dogs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1649-1657
• /
• 2010

We have investigated the unexpected phenomena on the surface of molded GFRP composites. The major cause of the unevenness, as a result of which the surface becomes rough, is a shrinking of the matrix in the process of holding pressure and cooling temperature. The higher holding pressure load in a molding process and the lower demolding temperature in an annealing experiment, the better GFRP composites moldings improved its appearance. In addition, by taking the holding pressure and demolding temperature into consideration, we evaluate the process that causes the surface unevenness and the variation in the fiber projection height.