• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.163-179
• /
• 2010

Recentlythe concept of fast fashion is drawing attention as customer needs are diversified and supply lead time is getting shorter in fashion industry. It is emphasized as one of the critical success factors in the fashion industry how quickly and efficiently to satisfy the customer needs as the competition has intensified. Because the fast fashion is inherently susceptible to trend, it is very important for fashion retailers to make quick decisions regarding items to launch, quantity based on demand prediction, and the time to respond. Also the planning decisions must be executed through the business processes of procurement, production, and logistics in real time. In order to adapt to this trend, the fashion industry urgently needs supports from intelligent quick response(QR) system. However, the traditional functions of QR systems have not been able to completely satisfy such demands of the fast fashion industry. This paper proposes an intelligent quick response system for the fast fashion(IQRS-FF). Presented are models for QR process, QR principles and execution, and QR quantity and timing computation. IQRS-FF models support the decision makers by providing useful information with automated and rule-based algorithms. If the predefined conditions of a rule are satisfied, the actions defined in the rule are automatically taken or informed to the decision makers. In IQRS-FF, QRdecisions are made in two stages: pre-season and in-season. In pre-season, firstly master demand prediction is performed based on the macro level analysis such as local and global economy, fashion trends and competitors. The prediction proceeds to the master production and procurement planning. Checking availability and delivery of materials for production, decision makers must make reservations or request procurements. For the outsourcing materials, they must check the availability and capacity of partners. By the master plans, the performance of the QR during the in-season is greatly enhanced and the decision to select the QR items is made fully considering the availability of materials in warehouse as well as partners' capacity. During in-season, the decision makers must find the right time to QR as the actual sales occur in stores. Then they are to decide items to QRbased not only on the qualitative criteria such as opinions from sales persons but also on the quantitative criteria such as sales volume, the recent sales trend, inventory level, the remaining period, the forecast for the remaining period, and competitors' performance. To calculate QR quantity in IQRS-FF, two calculation methods are designed: QR Index based calculation and attribute similarity based calculation using demographic cluster. In the early period of a new season, the attribute similarity based QR amount calculation is better used because there are not enough historical sales data. By analyzing sales trends of the categories or items that have similar attributes, QR quantity can be computed. On the other hand, in case of having enough information to analyze the sales trends or forecasting, the QR Index based calculation method can be used. Having defined the models for decision making for QR, we design KPIs(Key Performance Indicators) to test the reliability of the models in critical decision makings: the difference of sales volumebetween QR items and non-QR items; the accuracy rate of QR the lead-time spent on QR decision-making. To verify the effectiveness and practicality of the proposed models, a case study has been performed for a representative fashion company which recently developed and launched the IQRS-FF. The case study shows that the average sales rateof QR items increased by 15%, the differences in sales rate between QR items and non-QR items increased by 10%, the QR accuracy was 70%, the lead time for QR dramatically decreased from 120 hours to 8 hours.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.247-254
• /
• 2003

A study was carried to compare two varieties of tall fescue(Festuca arundinacea Schr.): Fawn (endophyte infection) and Roa(endophyte-free). The study examined plant height, botanical composition, and dry matter yield of mixed pasture. The cattle grazed on a mixed pasture of tall fescue species and orchardgrass(Dactylis glomerata L.), perennial ryegrass(Lolium perenne L.) and white clover(Trifolium repens L.) during March 22, 1997, to September 21, 1997. The number of grazing animals was 4.3/ paddock(50m x50m) and was adjusted according to the condition of pasture. Dry matter yields determined on ungrazed pasture(7-time harvests) were 1,690 $\pm$407kg and 1,128 $\pm$ 238kg/ha on pastures consisting of Fawn and Roa, respectively. This difference was significant(P<0.01). There were 17.71 $\pm$ 1.27cm and 12.83$\pm$0.90cm in average plant lengths of Fawn and Roa(P<0.01), respectively The botanical composition of tall fescue and orchardgrass in the mixture treatment included in the Fawn variety were shown in 34.2 and 3.8％, comparing Roa with 17.1 and 9.6％, on the 21th of September, 1997, respectively. Tall fescue Roa represented a higher botanical composition than orchardgrass(a main species on Cheju). Crude protein content of Fawn was slightly less than that of Roa. From these results, we may conclude that Roa variety is nutritionally better, but is less adaptible to high temperature climate than Fawn. However, Roa variety is still better than orchardgrass in high temperature conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.15-28
• /
• 2012

This study was carried out to know adaptability and growth characteristics, yield, chemical compositions and nutrition yield of corn hybrids for silage at paddy field. The field experiments were conducted at Sangju province for one year (2009). The experimental design was arranged in a randomized block design with three replication. The treatments consisted of eleven corn hybrids. The planting date was on 1 May and harvested at 24 August. Stem diameter, stem hardness and number of ear were higher in P32P75 than other varieties. Ear height, dead leaf and green degree were highest in $NC^+$7117, but number of root system and Brix ($B^{\circ}$) were higher in P3394 than other varieties. Crude protein and crude fat (EE) were highest in P32K61 and P31P41, respectively (P<0.01). NDF and ADF were highest in KPO and KIO, respectively, but no significant differences were found among the varieties. Total mineral contents were the highest in Kwangpyongok (9,775 mg/kg), and P3394 (6,651 mg/kg) was the lowest as compared to other varieties (P<0.01). Crude protein yield, crude fat yield and mineral yield were highest in P3156, P31P41 and KPO, respectively (P<0.01). Total composition amino acid and total fatty acid were the highest in P32K61 and KIO, respectively (P<0.01). Yields of crude protein, fatty acid, composition amino acid and TDN were the highest in P3156 (P<0.01). But yields of crude protein and mineral were the highest in P31P41 and KPO, respectively (P<0.01). Total digestible nutrient (TDN) was higher in order of P3156 > $NC^+$7117 > P31N27 > KPO > P32K61 > P32T83 > P32P75 > P31P41 > P3394 > P32W86 > KIO. Based on the above results, corn hybrid varieties could be recommended in P3156, NC+7117 and P31N27 for growth characteristics, quantitative production and nutrition yield.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.304-312
• /
• 2013

This study was conducted to investigate the effect of total neutral detergent fiber (NDF) and forage-derived NDF (fNDF) on nutrient intake and milk production in Holstein dairy cows. Thirty-six Holstein dairy cows at weeks 4 to 20 of lactation were included in this study. The cows were arranged in a randomized complete block design and assigned to one of six diets: 1) 38% NDF with 18% fNDF (HN-HF); 2) 38% NDF with 15% fNDF (HN-MF); 3) 38% with 12% fNDF (HN-LF); 4) 34% NDF with 18% fNDF (LN-HF); 5) 34% NDF with 15% fNDF (LN-MF); and 6) 34% with 12% fNDF (LN-LF). The cows were fed a total mixed ration twice daily (07:00 and 18:00 h) and given ad libitum access to feed and water throughout the experiment. Data on the intake of nutrients (DM, NEl, CP, NDF, fNDF, NFC), milk yield, composition, fat-corrected milk (FCM), fat and protein corrected milk (FPCM), and energy corrected milk (ECM) were analyzed. Lower dietary concentrations of total NDF or fNDF resulted in an increase in DM, NEl, and NFC intake (p<0.01), milk yield (p<0.05) and a lower milk fat concentration (p<0.01). The LN treatment showed no significant differences in milk fat concentration compared to the HN however, further reduction in fNDF decreased milk fat content (p<0.01). The lowest level of milk fat was observed in the LN-LF diet group. Changes in the dietary concentrations of NDF or fNDF did not affect the concentrations of milk protein or SNF (solid not fat), although the yield of milk protein and SNF increased with higher milk yield (p<0.01). The level of fNDF influenced the level of FCM (p=0.07), as well as FPCM and ECM yield (p<0.05). A highly positive correlation between fNDF intake and milk fat concentration was observed in animals with low NDF compared to those offered high NDF. A strong correlation was also observed between milk yield and low NDF intake compared to high NDF intake.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.454-460
• /
• 2019

The purpose of this study is to analyze the distribution characteristics of mist spray particle size by devising a rotary mist spraying device to develop the evaporative salt water desalination system. The rotary mist spraying device was consisted of a BLDC sirocco fan, a spinning fan, a fan fixed shaft and a salt water supply device etc. In this study we analyzed the characteristics of spray particle size and distribution according to the variation of sirocco fan surface roughness(Ra, ${\mu}m$), revolutions(rpm) and salt water flow rate(mL/min). When sirocco fan surface roughness(Ra) was in the range of $0.27{\sim}7.65{\mu}m$, the spray particle size was $0.117{\sim}1.360{\mu}m$. And then more than 90% of spray particles were found to be less than $0.50{\mu}m$. When sirocco fan surface roughness(Ra) was in the range of $12.70{\sim}22.84{\mu}m$, the spray particle size was $2.51{\sim}184.79{\mu}m$ and more than 98% of spray particles were found to be less than $13.59{\mu}m$. To analyze the effect of fan rotation speed on the size and distribution of spray particles, when surface roughness Ra was fixed $0.27{\mu}m$ and fan rotation speed and salt water flow rate was respectively changed at 3,800~5,600 rpm and 2.77~8.28 mL/min, spray particle size was $0.314{\sim}0.541{\mu}m$. And when salt water flow rate was 9.74 mL/min and fan rotation speed was 3,800~5,200 rpm, spray particle size was in the range of $29.29{\sim}341.46{\mu}m$ and in case of 5,600 rpm more than 98.23% of spray particles were in the range of $2.51{\sim}13.59{\mu}m$.

• The Korean Journal of Archival Studies
• /
• no.13
• /
• pp.179-203
• /
• 2006

This study develops the process and method of official administration documents which have remained ill-balanced like the official documents of the government-general of Chosun(the pro-Japanese colonial government (1910-1945)). At first, the existing Appraisal-theories are recomposed. The Appraisal-Theories of Schellenberg is focused valuation about value of records itself, but fuction-Appraisal theory is attached importance to operational activities which take the record into action. But given that the record is a re-presentation of operational activities, the both are the same on the philosophy aspect. Therefore, in the case that the process - method is properly designed, it can be possible to use a composite type between operational activities and records. Also, a method of the Curve has its strong points in the macro and balanced aspect while the Absolute has it's strength in the micro aspect, so that chances are that both alternate methodologies are applied to the study. Hereby, the existing Appraisal theories are concluded to be the mutually-complemented things that can be easily put together into various forms according to the characteristics of an object and its situation, in the terms of the specific Appraisal methodology. Especially, in the case of this article dealing with the imbalance remains official-documents, it is necessary to compromise more properly process with a indicated useful method than establishing a method and process by choosing the only one theory. In order to appraise the official-documents of the pro-Japanese colonial government (1910-1945), a macro appraisal of value has to be appraised about them by understanding a system, functions and using the historical-cultural evolution, after analysing Disposal Authority. From this, map the record so that organization function maps are constructed regarding the value rank of functions and detailed-functions. After this, establish the appraisal strategy considering the internal environment of archival agencies and based on micro appraisal to a great quantity of records remained and supplying other meaning to a small quantity of records remained for example, the oral resources production are accomplished. The study has not yet reached the following aspects ; a function analysis, historical decoding techniques, a curve valuation of the record, the official gazette of the government general of Chosun( the pro-Japanese government for 1910-1945), an analysis method of the other historical materials and it's process, presentation of appraisal output image. As the result, that's just simply a proposal and we should fill in the above-mentioned shortages of the study through development of all the up-coming studies.

• The Korean Journal of Archival Studies
• /
• no.20
• /
• pp.77-114
• /
• 2009

The actual conditions of the labor unions are primitive. First, there is no good records management regulation. At this research, I found it that most regulations of the labor unions were all the same. I think they have been copied a kind of one of originality. Second, the definition of records were very narrow, like documentary evidence. Third, the classification, filing, disposal regulations are the below level of the public institution in 1970s. Fourth, there are no standards of the records scheduling for the labor records. What kind of labor records have the historical values? I could not find, only the documentary evidence value. So, I think The actual conditions of the labor unions are primitive. I investigated the collections of the Southern Labor Archives in USA. There were many kind of records. For example, the records of regional labor unions also central labor unions, pamphlets, journals, photos, personal records, oral history, organizational records like protocols article of associations internal rules, minute books etc. Like this the collections of the Southern Labor Archives in USA are very various. But our actual conditions of the labor unions is far from that. Rather, we just have tried collected records for publishing the white papers. But this habitual practice would not be desirable. Because they must manage the records from the producing time. Mostly, 'laborer history HANNAE' were organised, and they are trying the collecting and management of the labor records. Also They are trying the computerizing, compilation. 'HANNAE' has the condition for the transformation of the labor archives. But if they want to be really, they must make the records management infra and so, should normalize the record management firstly. For example, They must be keep the standardized records management regulations, records scheduling redesigned. the developing standard model for the records management. And they have the vision for the hub of the labor archives. When coming to this, it will be realized the labor archives Now the records for the working class are disappearing. The managing the records for the labor is another labor movement. All together should join it. But I think the supporting of the archival science research colleagues will be the essential part.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.