• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.603-609
• /
• 2013

In December 1998, Act on the investigation and inquiry into marine accidents was amended by inserting new Paragraph (2) of Article 4, which states "Where two or more persons are related to the occurrence of a marine accident when the Maritime Safety Tribunal(hereinafter referred to as the "MST") examines the causes of a marine accident as provides for under Paragraph (1), the MST may disclose the extent to which each responsible person is related to the cause of the marine accident". Based on this new Paragraph, the apportionment system of causation ratio in the ship collision was introduced in February 1999. However the apportionment system is adopted 12 years ago, public debate has continued about the positive and negative aspects of the system. Thus some groups advocate the system for the advantages, but other groups argue that this system should be abolished. Therefore, at first, this study analyzes the adopting background and the main reasons of the pros and cons discussion on the apportionment system of causation ratio in the ship collision. Then we conduct a survey analysis to investigate stakeholder's satisfaction of this new system in the ship collision cases. Finally this study suggests the policy proposal to improve the apportionment system of causation ratio in the ship collision.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1073-1082
• /
• 2004

This paper presents a technique for an agent to adaptively behave to unforeseen and dynamic circumstances. Since the traditional methods utilized the information about an environment to control intelligent agents, they were robust but could not behave adaptively in a complex and dynamic world. A behavior-based method is suitable for generating adaptive behaviors within environments, but it is necessary to devise a hybrid control architecture that incorporates the capabilities of inference, learning and planning for high-level abstract behaviors. This Paper proposes a 2-level control architecture for generating adaptive behaviors to perceive and avoid dynamic moving obstacles as well as static obstacles. The first level is behavior-network for generating reflexive and autonomous behaviors, and the second level is to infer dynamic situation of agents. Through simulation, it has been confirmed that the agent reaches a goal point while avoiding static and moving obstacles with the proposed method.

• Journal of Christian Education in Korea
• /
• v.70
• /
• pp.75-106
• /
• 2022

The religious discourse produced by the daily newspapers can be viewed as a 'social-relationship' discourse rather than a religion's 'faith-identity' discourse. As a social relationship discourse, the understanding of Korean Church (Protestantism) discourses should be understood in the context of the social structural changes in South Korea. The public discourse produced by the media shows a reality that has been interpreted with specific values and standards on the premise of Spatio-temporal specificity rather than the actual social reality. This research approaches the Korean Church discourses produced by the daily newspaper from a social constructionism perspective. Moreover, the globalization theory is especially highlighted due to the social structural changes in South Korea. The research purpose is to reflect on the relationship between Korean society and the Korean Church in the 21st-century Korean situation through content analysis and discourse analysis in Korean newspapers. As a result of analysing the Korean Church discourse produced by the daily newspapers over the past 18 years (2004-2021), it was found that various mutual conflicts between Korean society and the Korean church were occurring.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.475-478
• /
• 2009

안개가 교통사고를 유발시키는 원인을 살펴보면 운전자의 시거와 밀접한 관련이 있다. 짙은 안개가 발생하게 되면 돌발상황이 발생하였을 때 도로를 주행하던 차량이 안전하게 정지하기 위해서 필요한 최소 정지거리가 증가하게 되나 안개로 인한 시정이 나빠지게 되어서 사고발생확률이 높은 것이다. 또한 안전한 시거가 확보되지 않기 때문에 단독사고 발생 후 뒤따르던 차량이 전방을 확인하지 못한 상황에서 연쇄 충돌하게 되어 사고가 대형화된다. 이에 본 연구에서는 IT기술인 RFID와 USN을 이용하여 안개로 인한 시정거리에 따라 도로에 있는 과속카메라가 도로주행 한계속도를 자기 스스로 판단하여 자동조절하게 만들고 변경된 한계속도를 그 도로를 이용하는 차량운전자 휴대폰에 문자로 전송해주고 도로전광판에서도 정확하게 주행속도정보를 볼 수 있게 한다. 그리하여 도로주행 한계속도를 어기는 차량에는 범칙금을 부과하게 만든다. 본 연구를 통해 안개에 대한 교통사고의 위험을 줄이고 사회적 경제적으로 이익이 되도록 하기위해 기상상태 변화에 따른 USN 기반의 도로주행 한계속도 지능적 조정 관리시스템을 제안하고자 한다.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.736-737
• /
• 2017

교통약자(시각장애인, 노약자 등)에게 필요한 필수품 중 가장 중요한 것은 지팡이라고 생각을 한다. 하지만 지팡이에 많이 의존하는 것에 비해 지팡이가 안전한 보행을 도와주기에는 아직 부족하다고 생각을 했다. 따라서 교통약자의 안전한 보행을 위해 어두울 때 밤길을 비춰주거나 지팡이를 비춰줌으로써 추가적인 시야확보나 보행자의 존재 여부를 알려주며 보행자가 쓰러지는 등 응급상황을 판단하여 지정해둔 비상 연락망에 연락을 하고 현재 위치를 문자로 전송하게 할 수 있도록 하고 또한 지팡이가 감지할 수 있는 것 보다 좀 더 먼 장애물들을 감지하여 충돌을 사전에 방지하는 지팡이를 만들었다.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.629-635
• /
• 2007

Reduced crew performance is frequently cited as a major causal factor in maritime accident causation. Although considerable research has been conducted on the hours of work undertaken by seafarers through interviews and the analysis of records, experimental studies to observe the effects of factors such as high workload, shift patterns, stress, sleep deprivation and disturbance on the cognitive performance of mariners have been limited. Other safety-critical transport industries, such as aviation and rail, have developed fatigue management tools to help manage the work patterns of their operators. Such a tool for mariners would assist shipboard crew, marine pilots and shore management in planning and improving work schedules. The overall aim of this paper is to determine a fatigue factor, which can be applied to human performance data, as part of a software program that calculates total cognitive performance. This program enables us to establish the levels of cognitive performance of a group of marine pilots to test a decision-making task based on radar information. This paper addresses one of the factors that may contribute to the determination of various fatigue factors: the effect of different work patterns on the cognitive performance of a marine pilot.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.77-85
• /
• 2006

A demonstration facility for an advanced spent fuel conditioning process (ACP) is under construction at KAERI. In this hotcell facility, the rear door is frequently used since all process equipment and materials are taken in and out only through the rear door. Therefore , both the structural safety and stability of the door are essentially required for the safety of ACP facility. In this paper, the finite element analysis has been performed to investigate the structural safety under the impact condition between the rear door and the door frame. Also the possibility of the rear door being tumbled over by the impact force or the inertia force under a sudden stop conditon has been evaluated. The analysis results demonstrate that the structural safety and stability of the rear door are sufficiently assured for both the impact and the accidential stop conditions.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.23-32
• /
• 2021

The high-level Space Situational Awareness (SSA) objective is to provide to the users dependable, accurate and timely information in order to support risk management on orbit and during re-entry and support safe and secure operation of space assets and related services. Therefore the risk assessment for the re-entry of space objects should be managed nationally. In this research, the Software for Re-Entry Prediction of space objects (SREP) was developed for national SSA system. In particular, the rate of change of the drag coefficient is estimated through a newly proposed Drag Scale Factor Estimation (DSFE), and is used for high-precision orbit propagator (HPOP) up to an altitude of 100 km to predict the re-entry time and position of the space object. The effectiveness of this re-entry prediction is shown through the re-entry time window and ground track of space objects falling in real events, Grace-1, Grace-2, Tiangong-1, and Chang Zheng-5B Rocket body. As a result, through analysis 12 hours before the final re-entry time, it is shown that the re-entry time window and crash time can be accurately predicted with an error of less than 20 minutes.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.69-93
• /
• 2017

The development of ICT has leaded the diversification and changes of supplies and demands in markets. It also caused the creations of a variety of values which are differentiated from those in the existing market. Therefore, a new-type market is created, which can include multi-value chains which are from ICT-based created markets as well as the existing markets. We defined the platform as the new-type market. In the platform, the multi-value chains can be coexisted with multi-values. In true market, when a new-type value chain entered into an existing market, it is general that it can be conflicted with the existing value chain in the market. The conflicted problem among multi-value chains in a market is caused by the sharing of limited market resources like suppliers, consumers, services or products among the value chains. In other words, if there are multi-value chains in the platform, then it is possible to have conflictions, overlapping, creations or losses of values among the value chains. To solve the problem, we introduce coexistence factors to reduce the conflictions to reach market equilibrium in the platform. In the other hand, it is possible to lead the creations of differentiated values from the existing market and to augment the total market values in the platform. In the early era of ICT development, ICT was introduced for improvement of efficiency and effectiveness of the value chains in the existing market. However, according to the changed role of ICT from the supporter to the promotor of the market, ICT became to lead the variations of the value chains and creations of various values in the markets. For instance, Uber Taxi created a new value chain with ICT-based new-type service or products with new resources like new suppliers and consumers. When Uber and Traditional Taxi services are playing at the same time in Taxi service platform, it is possible to create values or make conflictions among values between the new and old value chains. In this research, like Uber and traditional taxi services, if there are conflictions among the multi-value chains, then it is necessary to minimize the conflictions in the platform for the coexistence of multi-value chains which can create the value-added values in the platform. So, it is important to predict and discuss the possible conflicted problems between new and old value chains. The confliction should be solved to reach market equilibrium with multi-value chains in the platform. That is, we discuss the possibility of the coexistence of multi-value chains in the platform which are comprised of a variety of suppliers and customers. To do this, especially we are focusing on the healthcare markets. Nowadays healthcare markets are popularized in global market as well as domestic. Therefore, there are a lot of and a variety of healthcare services like Traditional-, Tele-, or Intelligent- healthcare services and so on. It shows that there are multi-suppliers, -consumers and -services as components of each different value chain in the same platform. The platform can be shared by different values that are created or overlapped by confliction and loss of values in the value chains. In this research, as was said, we focused on the healthcare services to show if a platform can be shared by different value chains like traditional-, tele-healthcare and intelligent-healthcare services and products. Additionally, we try to show if it is possible to increase the value of each value chain as well as the total value of the platform. As the result, it is possible to increase of each value of each value chain as well as the total value in the platform. Finally, we propose a coexistence model to overcome such problems and showed the possibility of coexistence between the value chains through experimentation.