• 한국임상수의학회지
• /
• 제27권1호
• /
• pp.42-45
• /
• 2010

만성의 비강 삼출물 및 비출혈로 내원한 5마리의 개와 2마리의 고양이가 내원하여 일반 방사선 검사 및 컴퓨터단층촬영 (CT), 비강의 세포학적 검사와 미생물학적 검사를 실시하여 비염으로 진단한 증례를 선정하여 이의 CT 영상의 특징을 비교 평가하였다. 비강의 일반 방사선 검사에서 3 증례에서만 비강의 비정상 소견을 확인하였다. CT 검사 결과, 비강 (7증례) 및 전두동 (3 증례), 비인두 (2증례)에서 공동을 갖는 isodense한 병변을 확인하였으며 비중격의 소실 (4 증례), 비갑개의 파괴 (5 증례), 상악 (3 증례) 또는 경구개 (3 증례)의 골융해 소견이 관찰되었다. 병변의 조영증강효과는 5 증례에서 확인하였다. CT는 비강의 질병을 평가하고 특히 병변의 범위를 결정하는데 매우 유용하다.

• 대한소아치과학회지
• /
• 제33권1호
• /
• pp.35-42
• /
• 2006

정상적인 치열의 형성 및 치아의 생성과정을 분석하고 실제로 임상에 적용하기 위해 치아의 발생과정을 연구하는 것은 매우 중요하다. 본 연구는 이식된 태아 치아싹의 석회화가 가능하고 정상적인 구조로 발육할 수 있는지 밝히기 위해, 그리고 악골 자체가 새로운 이식 공여부로 사용가능한지 알기 위해 흰쥐의 발치와에 치아싹을 이식하여 치아의 형성을 살펴보고자 하였다. 이를 위하여 성숙한 흰쥐의 상악 제 1구치를 발거한 발치와에 13.5일된 태아쥐의 치아싹을 이식한 후 4, 8주 후에 희생하여 조직학적 및 방사선학적으로 관찰하여 다음과 같은 결과를 얻었다. 1. 이식된 치아싹에서 상아질과 백악질, 치수, 치주인대의 소견을 갖는 석회화된 조직이 형성되었다. 2. 형성된 경조직 및 연조직은 정상적인 치아형성과정에 비해 발육이 늦었으며 유착 및 골양상아질(osteodentin)과 같은 비정상적 조직이 관찰되었다. 3. 석회화된 조직은 8주내에 악궁으로 맹출하는 소견이 관찰되지 않았다.

• 대한치과의사협회지
• /
• 제55권11호
• /
• pp.756-765
• /
• 2017

Purpose: The purpose of this article is to evaluate a change o bone level on the sinus floor by a bone added osteotome sinus floor elevation (BAOSFE) technique, according to the amount of deproteinized bovine bone mineral (DBBM). And Changes in augmented bone height after BAOSFE procedure were also assessed for 6 months after the implant procedure. Materials and Methods: Forty eight single implants were placed in the posterior maxilla using BAOSFE technique. The implantation sites were classified into two groups according to the amount of grafted DBBM, 0.25 group (0.25g) and 0.5 group (0.5 g). Panoramic views or cone-beam computed tomography (CBCT) were taken at the time of implant placement with BAOSFE and after at least 6 months to assess the bone level changes in the elevated sites with DBBM. Results: Alveolar bone level around all implants was stable clinically and radiographically during the follow-up. Mean augmented bone height was $5.21{\pm}0.94mm$ in 0.25 group and $6.92{\pm}1.19mm$ in 0.5 group. Statistically significant difference in augmented bone height was found in the comparison between the 0.25 group and 0.5 group at the time of surgery. There was a positive correlation between the length of the implant protruding into the maxillary sinus and the augmented bone height. After 6 months, mean reduction of augmented bone height was $0.50{\pm}0.34mm$ in 0.25 group and $0.41{\pm}0.30mm$ in 0.5group. There was no specific correlation between the reduction of augmented bone height and amount of grafted DBBM. Conclusion: Within the limit of this study, the amount of grafting materials and the protrusion length of implant into the maxillary sinus affect the amount of the augmented bone height.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.511-517
• /
• 2007

Purpose: The aim of this study is to determine whether a difference in the amount of bone graft material is needed between edentulous patients and dentulous patients and to calculate the amount of augmentation for a sinus lift procedure. Methods: 19 patients(20 sinuses) were included to measure maxillary sinus volume. Facial CT scanning was performed using MX 8000 IDT CT devices(Philips, USA). And it was used for IDLvm(The IDL Virtual Machine) 6.0, CT Volume Analyzer Ver 2.3 program to measure maxillary sinus volumes Results: At edentulous patients, volumes(mean${\pm}SD$) of the inferior portion of the sinuses were $0.56{\pm}0.13cm^3$(5mm height), $2.35{\pm}0.57cm^3$(10mm height), $4.85{\pm}1.10cm^3$(15mm height). At dentulous patients, volumes(mean${\pm}SD$) of the inferior portion of the sinuses were $0.41{\pm}0.18cm^3$(5mm height), $1.76{\pm}0.42cm^3$(10mm height), $3.80{\pm}0.84cm^3$ (15mm height). A significant correlation was found between augmentation height(5mm, 10mm, 15mm) and the calculated sinus volume.(p=0.027, p=0.018, p=0.044) Conclusions: A significant correlation was found between augmentation height(5mm, 10mm, 15mm) and the calculated sinus volume. Detailed preoperative knowledge of sinus lift augmentation volume is helpful in determining the appropriate amount of the bone graft material.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.405-418
• /
• 2007

Mesenchymal stem cells(MSCs) have been though to be multipotent cells that can replicate that have the potential to differentiate into lineages of mesenchymal tissue including the bone, cartilage, fat, tendon, muscle, and marrow stroma. Especially, scaffolds to support cell-based tissue engineering are critical determinants of clinical efforts to regenerate and repair the body. Selection of a matrix carrier imvolves consideration of the matrix's role as a scaffold for physical support and host tissue integration as well as its ability to support of synergize the osteoinductive program of the implanted mesenchymal stem cell. The aim of this study is to evaluate the effect of autobone and Bio-$Oss^{(R)}$ to adherent mesenchymal stem cells as scaffolds on sinus augmentation with fibrin glue mixture in a rabbit model. 16 New Zealand White rabbits were divided randomly into 4 groups based on their time of sacrifice(1, 2, 4 and 8 weeks). First, mesenchymal stem cells were isolated from iliac crest marrow of rabbits and expanded in vitro. Cell culture was performed in accordance with the technique described by Tsutsumi et al. In the present study, the animals were sacrificed at 1, 2, 4 and 8 weeks after transplantation, and the bone formation ability of each sides was evaluated clinically, radiologically, histologically and histomorphologically. According to the histological observations, autobone scaffolds group showed integrated graft bone with host bone from sinus wall. At 2 and 4 weeks, it showed active newly formed bone and neovascularization. At 8 weeks, lamellae bone was observed in sinus graft material area. Radiologically, autobone with stem cell showed more radiopaque than Bio-$Oss^{(R)}$ scaffolds group. there were significant differences in bone volume between 4 and 8 weeks(p<0.05).

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.254-262
• /
• 2019

임플란트에 대한 급여의 확대로 임플란트의 지지를 받는 서베이드 고정성 보철물 제작 후 국소의치로 수복하는 증례에 대한 관심이 증가하고 있다. 이러한 증례의 예지성 있는 결과를 위해서 국소의치의 기본적인 설계 원칙과 잔존 치조골을 동시에 고려한 임플란트 계획수립이 필요하다. 본 증례는 편측 소수 잔존치를 가진 67세 남자 환자로 국민건강보험의 적용을 받을 수 있는 치료를 희망했다. CAD 소프트웨어를 활용하여 임시의치의 교합면, 국소의치의 기본적인 설계 원칙 및 흡수된 치조제를 모두 고려한 임플란트의 식립 위치를 결정하였다. 치료 결과 상악 및 하악 의치의 안정성 및 유지력이 적절하게 확보되었다. 본 증례는 임플란트 고정성 보철물 제작 시 국소의치의 기본적인 원칙과 흡수된 치조제를 모두 고려하기 위해 디지털 기술을 진단 및 치료에 활용하였고, 안정적인 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.367-378
• /
• 2023

최근 CAD-CAM (computer-aided design-computer-aided manufacturing) 기술 및 3D 프린팅 기술의 발전과 함께 다양한 디지털 기법들의 도입으로 top-down 방식의 최종 보철 수복의 정확성과 효율성이 증대되고 있다. 본 증례는 전후 엇갈린 교합을 가진 환자에서 총 9개의 상하악 구치부 임플란트 식립을 통해 안정적인 교합 지지를 얻으면서 잔존 치조골의 고도 흡수 경향을 보인 상악 전치부 무치악 부위는 케네디 4급 임플란트 보조 국소의치로 수복함으로써 연조직의 심미성을 회복하였다. 전산화단층촬영 가이드 수술로 계획된 위치에 임플란트를 식립하고, 이중 스캔 기법으로 임시 수복 단계에서 안정화된 교합을 최종 보철물에 반영하며, 코핑과 프레임워크를 금속 3D 프린팅으로 제작하여 효율적이며 예측 가능한 top-down 방식의 전악 구강 수복을 달성하였기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.316-327
• /
• 2023

구치부 심한 골소실을 보이는 완전 무치악 환자에게 이공 전방에 4개 이상의 임플란트를 식립 후 전악 수복을 하는 'All-on-X' 임플란트 지지 고정성 보철 수복을 고려해 볼 수 있다. 과거에는 이러한 임플란트 고정성 보철 수복시 특별한 기준점 없이 술자의 판단에 의존하여 잔존 치조제에 임플란트를 식립하고 보철 수복 단계에선 이미 식립된 임플란트에 맞춰서 보철물을 제작하는 방식이었지만, 최근 디지털 치의학의 발전으로 진단, 수술, 보철 제작 등 모든 과정에서 계획적이고 예지력 있는 치료가 가능해졌다. 디지털 총의치, 임플란트 서지컬 가이드, 안면스캔 그리고 복제 의치를 통한 인상 채득 등의 디지털 기술들을 사용하여 복잡한 기공 과정을 줄이고, 임시 수복물의 심미와 기능을 최종 보철물로 효과적으로 이행할 수 있다. 상기 환자는 상악 디지털, 하악 'all-on-x' 임플란트 고정성 보철물 수복환자로, 진단부터 최종 수복까지 디지털 기술을 활용하여 기능과 심미성을 만족시키는 보철물을 제작할 수 있었기에 이를 보고하고자 한다.