• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1479-1485
• /
• 2010

In recent times, due to wire drawing of high carbon steel at a high speed to ensure a high productivity and high strength, axial residual stress are generated because of rapid increase in surface temperature. In the process, the temperatures of the wires increased because of the deformation of the wires and the friction between the die and wire. In particular, in the case of the wire drawing at a high speed, friction leads to a large temperature gradient so that considerable axial residual stress is generated on the surface. In this study, the relationship between axial residual stress and increase in the surface temperature was investigated, and a prediction model of uniform temperature was proposed. Then, a prediction model for residual stress was developed. The proposed model was verified by measuring the residual stress by X-ray diffraction on drawn wires.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.659-666
• /
• 2012

To secure the thermal crack resistance of mass concrete, researches and the field applications of low heat portland cement (LPC), ternary blended cement (TBC) which is produced by blending ordinary portland cement with blast furnace slag and fly ash, and early strength low heat blended cement (EBC) increased in recent years. Although the model for adiabatic temperature rise is necessary for estimating the risk of thermal cracking of concrete structures, sufficient data have not been accumulated for these mixtures. In addition, the differences in adiabatic test results have been reported for the volume of test specimens. Therefore, the present study evaluated the characteristics of adiabatic temperature rise based on the type of binder and the volume of the adiabatic test specimen. Test results indicated that the maximum temperature rise ($Q_{\infty}$) and the reaction factor (r) of TBC were the lowest. Test results also showed that $Q_{\infty}$ and r changed with respect to the volume of test specimen. $Q_{\infty}$ and r obtained from 6l equipment were lower than those of 50l equipment. Therefore, corrections with respect to this phenomenon was confirmed and the corrections factors are presented.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.244-250
• /
• 1997

본 연구에서는 에폭시/산무수물계에 경화촉진제를 첨가한 시료를 몰드(mold)내에서 등온 경화시킬 때 시료 내부의 온도변화를 측정하여 얻어진 온도-시간 곡선(temperature-time profile)을 조사하였다. 실험에 사용한 경화촉진제의 종류는 1-cyanoethy1-2-ethy1-4-methy1 imidazole(1E4MZ-CN), N,N-dimethy1 benzy1 amine(BDMA), 2,4,6-tris(dimethy1-aminomethy1)-phenol(DMP-30)이며 그들의 농도(c)는 1.0,1.5,2.0,2.5,phr그리고 경화온도(T$_{cure}$ )는 65,70,85,95$^{\circ}C$로 하였다. 경화가 진행되는 동안 시료내부의 온도는 초기에 경화온도로 상승한 후 본격적인 경화 반응이 일어나기 시작하여 온도가 급격히 상승하였다가 다시 감소하는 양상을 보였다. 온도-시간 곡선상에 나타나는 온도가 최고로 상승되는 시점(t$_{peak}$ )과 그 때의 온도(T$_{peak}$ )는 촉진제의 종류와 농도 그리고 경화온도에 의하여 영향을 받았다. 사용한 경화촉진제중에 DMP-30이 가장 짧은 t$^{peak}$ 값을 가져 가장 우수한 촉진 효과를 갖는 것으로 나타났으며, T$_{peak}$ 는 촉진제의 농도와 경화온도가 증가할수록 상승하였다. 그리고 경화촉진제의 농도와 경화온도의 변화에 따른 t$_{peak}$ 과 T$_{peak}$ 의 변화를 보면 촉진제 농도와 경화온도가 낮을 때 그 변화가 민감하여 2E4MZ-CN 이 가장 민감한 촉진제로 나타났으며 또한 T$_{peak}$ 에 영향을 주는 여러가지 요소들을 본 연구에서 얻어진 결과로부터 자세히 살펴보았다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.915-918
• /
• 2008

Hydration heat and autogenous shrinkage are generated essentially by the same hydration. Many researchers have studied the close relationship between hydration temperature and autogenous shrinkage but hardly any research has been undertaken to explain the specific numerical relation. In this study, early age properties of hydration heat and autogenous shrinkage of specimen whose section size was changed were analyzed, and relationship between hydration heat and autogenous shrinkage was investigated. In the results of the study, inner temperature and autogenous shrinkage increased as the section size increased. And rise and rise ratio of hydration temperature and autogenous shrinkage in hydration heating section and autogenous shrinking section are increased too. Temperature rise and autogenous shrinkage rise increased respectively, as hydration heating velocity and autogenous shrinking velocity increased. And autogenous shrinkage rise and autogenous shrinking velocity increased as hydration heating velocity increased.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.181-188
• /
• 2011

Spalling must be considered when designing high-strength concrete to cope with fire. This study investigates the temperature rise of steel bar in high-strength concrete coated with fireproof mortar using gypsum exposed to fire. It was found that fireproof mortar using gypsum is more effective in constraining the temperature rise of steel bar in the high strength concrete than fireproof mortar using cement, and that the thinner the cover depth of the fireproof mortar, the more significant the influence of the gypsum. In addition, while there was no difference between ${\alpha}$-hemihydrate mortar and ${\beta}$-hemihydrate mortar on the temperature rise of steel bar, the compressive strength of ${\alpha}$-hemihydrate mortar is higher than that of ${\beta}$-hemihydrate mortar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.38-38
• /
• 1999

KSTAR(Korea Superconducting Tokamak Advanced Research) 핵융합 실험 장치의 진공용기 및 진공용기 내부의 플라즈마 대향 부품들은 초고진공 (5$\times$10-9 Torr)의 달성을 위해 진공용기 내부의 이물질(H2, H2O, CO, CO2, CH4 등) 제거를 목적으로 SS316LN인 진공용기는 25$0^{\circ}C$, 탄소 물질인 플라즈마 대향부품은 35$0^{\circ}C$ 정도까지 가열(이하 베이킹)할 필요성이 있다. 이 가열방법으로 고온 질소가스를 진공용기 이중벽 사이로 흘려주는 방식과 코일에 저주파 교류전류를 흘려 진공용기를 유도가열하는 방식이 고려되고 있는데, 유도가열방식은 최대 유도 전력이 70kW 정도로 실제 베이킹에 필요한 열량을 공급하는데 있어 적잖이 부족하며 또 국부적인 가열 특성으로 인하여 KSTSR의 베이킹 방식은 전자의 가열방식을 우선적으로 채택하고 있다. 본 논문에서는 0-차원 해석을 통하여 진공용기와 플라즈마 대향 부품들에 대한 베이킹 계획을 결정하고 이를 만족시키기 위해 투입해야 할 열량을 직선적으로 증가하는 온도 곡선에서 각 부분의 온도 상승률을 다르게 설정한 세 경우와 F-자 형태로 변화하는 온도 곡선의 경우에 대해 각각 적용하여 시간에 따른 필요열량을 비교.검토하였으며, 이를 근거로 안정적인 베이킹 계획을 선정하였고 이 베이킹 계획의 실현을 위해 투입해야 할 고온 질소가스의 유량과 온도 도달시간까지 매 시간에서의 가스온도를 산출하였다. 토러스 형상의 토카막 진공용기와 플라즈마 대향 부품 및 다층단열재에 대한 해석 모델은 길이가 유한한 0-차원 실린더 모델로 가정하였고, 이에 대한 기하학적 성질 및 열역학적 성질은 유효계수를 고려하여 산출하였다. 진공용기 이중 벽 내부로 흐르는 질소가스의 유량과 온도의 계산은 진공용기 내벽과 외벽을 각각 독립적인 열전달 요소로 가정하여 구성한 모델을 이용하였다. 전체 해석에서 각 열전달 요소의 비열 값은 온도에 따라 변화하는 비열의 특성을 반영하였으며. 진공용기와 플라즈마 대향 부품의 방사율(emissivity)은 앞서 가정했던 각 온도 상승 곡선에 대해서 각각 0.1, 0.2, 1.3의 경우를 가정하여 계산하였다. 직선적으로 증가하는 온도 상승 곡선중 2$0^{\circ}C$/hr의 온도상승율을 갖는 경우가 다른 베이킹 시나리오 모델에 비해 효과적이라 생각되며 초대 필요 공급열량은 200kW 정도로 산출되었다. 실질적인 수치를 얻기 위해 보다 고차원 모델로의 해석이 필요하리라 생각된다. 끝으로 장기적인 관점에서 KSTAR 장치의 베이킹 계획도 살펴본다.

• Korean journal of food and cookery science
• /
• v.10 no.4
• /
• pp.394-404
• /
• 1994

본 실험은 1.5Kg 무게의 고기를 3가지 다른 내부온도(60$^{\circ}C$-rare, 70$^{\circ}C$-medium, 80$^{\circ}C$-well done)에 이르도록 3가지 다른 출력의 전자파(40%, 60%, 100%)로 조리시에 나타나는 고기의 조리조건(조리시간, 대기시간 및 대기시 상승온도)과 고거의 물리 화학적인 변화(수분, 단백질, 지방, vit $B_1$의 함량, 콜라겐의 용해도, 보수력, texture)를 관찰하였다. 각 처리구 간에 Kg당 조리시간은 유의적인 차이를 나타내었으나 대기시간은 유의적인 차이를 나타내지 않았다. 그러나 고기의 내부용도가 낮은 처리구일수록 긴 대기 시간이 요구되었다. 대기시 상승온도도 각 처리구 간에 유의적인 차이를 나타내지 않았으나 거의 모든 처리구에서 10도 이상의 상승온도가 관찰되었다. 고기의 내부온도가 상승할수록 조리시 중량손실도 증가되었고, 수분함량, 수분: 단백질의 비, 보수력, 비타민 $B_1$의 함량도 감소되었다. Texture를 측정한 항목들에서는 각 처리구간의 유의척인 차이를 나타내지 않았다. 콜라겐의 용해도는 각 처리구간에 유의적인 차이를 나타내지 않았으나 내부온도 60$^{\circ}C$와 70$^{\circ}C$ 처리구 사이의 용해도는 뚜렷한 증가가 관찰되었다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.70-76
• /
• 1999

With the recent increase in the use among young children of portable telephone public concern regarding potential health hazards due to a hot spot appearing inside the infant head, has been growing. Since the biological hazards due to RF exposure are caused mainly by a temperature-rise in tissue, the effect of localized SAR for portable telephones should also be related to the temperature-rise in the human head. In this paper, it was measured that in the actual use of portable telephone the temperature of the local tissue in the human-head change. As a result, it should be noted that the mean temperature of human-body and localized tissue is rising from beginning call. However the temperature variation of localized tissue is recovered rapidly as normal temperature, although the mean temperature of human-body rising continuously at ending call of portable telephone.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.276-283
• /
• 2023

Garlic (Allium sativum L.) is one of the most important vegetables used in various foods in Korea and many countries. The growth of garlic is influenced by various abiotic factors such as cultivation temperature, humidity, minimum temperature duration, and photoperiod. This study investigated the effects of increasing temperatures on the plant growth of the northern- ecotype garlic 'Uiseong' in a temperature gradient tunnel. As a result, temperature increase led to decreases in the bulb diameter, weight, and clove pieces of garlic. The rise of cultivation temperature increased the occurrence rate of incomplete bolting in the Northern-ecotype garlic 'Uiseong', resulting in decreases in productivity and a decrease in the yield of marketable garlic, indicating that temperature increases affect the development of garlic bulb formation. The findings of this study are expected to contribute as foundational data for understanding the growth responses of the northern-ecotype 'Uiseong' to increasing cultivation temperatures. The results of this study can be used to develop designing garlic growth models. In addition, the results of this study can improve understanding the interaction between increased temperature and garlic growth.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.