• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.58-65
• /
• 2009

A forest fire in the area of power line installations may be caused by flashover disturbances in power systems. In this study, experiments were conducted so as to investigate the reduction in dielectric strength caused by combustion flame, and flashover characteristics in the simulated condition of vertical-type model power lines were examined by making shorter and longer the horizontal distance(s) between combustion flame and high-voltage conductors under the application of 60[Hz] a.c. and d.c. high-voltages. As the results of the experimental investigation it is demonstrated that flame can reduce flashover voltages of the model air-gap in shorter range of the horizontal distance(s). Relative air density is considered in order to analyze the reduction causes of the flashover voltages, and it can be seen that the relative air density has a great influence on the flashover characteristics under the presence of combustion flame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.6
• /
• pp.650-662
• /
• 1989

In this paper, a new algorithm for feature extraction and classification of recognizing Hanguel patterns is proposed. Inputed patterns classify into six basic formal patterns and divided into subregion of Hanguel phoneme and extract the crook feature from position information of the each subregion. Hanguel patterns are defined and are made of the indexed-sequence file using these crook features points. Hanguel patterns are recognized by retrievignt ehses two files such as feature indexed-sequence file and standard dictionary file. Thi paper show that the algorithm is very simple and easily construct the software system. Experimental result presents the output of feature extraction and grouping of input patterns. Proposed algorithm extract the crooked feature using distance transformation method within the rectangle of enclosure the characters. That uses the informationof relative position feature. It represents the 97% of recognition ratio.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.11
• /
• pp.361-368
• /
• 2015

In AAGFCS the effective range is regarded as a range for the bullet's speed exceeding the speed of sound to damage the stationary target. Hence the real engagement range might be extended over the effective range for the approaching target since bullet's relative speed to the target increases depending on the approaching speed. However previous TOF equations have good computation accuracy within the effective range only, and they can not be used above that range due to their bad accuracy. We propose an accurate TOF computation method which can be used both within and above the effective range in real time. Some simulation results are shown to demonstrate usefulness of our algorithm for the 30mm projectile.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.508-512
• /
• 2007

하천유량자료는 이수, 치수, 수질관리 등의 목적으로 널리 사용되기 때문에 여러 가지 수문관측 자료 중 가장 중요하다고 할 수 있다. 그러나 우리나라의 유량자료는 여러 가지 한계를 가지고 있어서 수문자료로서 제대로 사용되지 못하고 있는 실정이다. 특히 홍수기 부자측정 방법에 의해 산정된 유량자료는 측정 여건, 방법, 기기 등의 한계로 인해 그 정확도가 더욱 낮다. 부자에 의한 유량측정은 일정거리를 유하하는 부자의 유하시간을 측정하여 평균유속을 구하고, 사전에 측량된 횡단면으로부터 유하한 개별 부자의 해당 단면적을 구하여 부분 단면적을 구한다. 구해진 개별 부자의 평균유속과 부분 단면적을 곱하여 부분유량을 산출한 후, 각 부분유량을 합하여 전체 유량을 계산한다. 이와같은 부자법은 유속-면적법이 가지고 있는 흐름 단면적 계산, 평균유속 계산의 불확실도 이외에 유하경로에 의한 불확실도, 부자 유하 시간의 불확실도, 유속 보정 계수의 불확실도 등을 포함한다. 기존 홍수 유량측정에 사용하고 있는 부자법은 육안에 의해 부자의 위치를 파악하고, 가상의 횡단선을 통과할 때 육안으로 관측하여 유하시간을 측정하는 방법이기 때문에 정확한 유량측정에 한계가 있다. 뿐만 아니라 측정에 다수의 인원이 필요하며, 홍수시 많은 비가 내리거나, 야간에 측정하는 경우에는 부자의 식별이 곤란하고 측정 여건이 불량하기 때문에 측정에 큰 애로가 있다. GPS를 이용한 전자부자는 자동으로 유속을 측정하기 위해 기존 홍수유량 측정에 사용하던 부자에 전자장치를 추가하는 것을 말한다. 본 연구에서는 GPS와 RF를 기존 봉부자에 추가하여 봉부자의 유속과 봉부자의 괘적을 측정할 수 있는 전자부자를 개발하였다. 개발한 전자부자는 기존 육안에 의한 방식보다 자동으로 정확한 유속 측정이 가능하며, 동시에 여러 개의 봉부자 사용이 가능하여 측정시간 절감이 가능하고, 비가 내리거나 야간에도 자동으로 측정이 가능한 특징을 지니고 있다. 본 연구에서 개발된 전자부자는 3개 주파수 대역을 이용할 수 있도록 개발하여, 총 15개의 부자를 동시에 투하할 수 있도록 개발하였다. 전자부자 시험결과 50m, 100m 구간 유속을 검증한 결과 50m의 경우 최대 평균 5.97%, 평균 2.38%의 상대오차를 나타냈으며, 100m의 경우 최대 5.43%, 평균 1.9%의 상대오차를 나타냈다. 자연하천 유량측정 결과 댐 방류량 대비 기존방법의 경우 약 8.2%의 상대오차를 지니고 있었으며, 전자부자의 경우 약 2.8% 상대오차를 지니고 있어, 기존 부자법에 비해 전자부자법이 5.4%의 상대오차 개선효과를 지니고 있었다. 이와같은 오차의 범위는 실제 하천에서 전자부자를 이용하여 유속측정이 가능함을 나타내는 결과이다.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.297-315
• /
• 2012

In this paper, we explore the effects of export insurance on the Korea's export by using the gravity model with the data of 112 countries that Korea exports on years of 2005 and 2009. For this model, we used the Korea export as a dependent variables and real GDP, distance between the two nations, export insurance, country credit rating of the Korea's counterpart countries and FTA were used as an independent variables. The results show that the underwriting performance of the export insurance and the sovereign credit rating of the export counterpart countries have the positive impact on Korea's export. Also, the impact of the export insurance is more increasing to the Korea exportation but the importance of the economy size of the export counterpart countries decreased after 2008 global financial crisis. Particularly, the influence to the export by the sovereign credit rating has diminished in that period and this seems to be due to the export insurance has increased. These results imply that the export insurance plays an important role to promote the Korea's exportation since 2008 global recession. Especially, if the recession continues, then there will be more crippling impact to the small-mid size companies rather than large size companies. Therefore, Korea government should do their best to continuously expand the export insurance for the purpose of increasing Korea exportation, expecially to the small-mid size companies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.422-429
• /
• 2018

To make students recognize the danger of fire smoke that may occur in ships and to improve the response capability, spaces for safety educ ation were built inside the training ship, and scenarios were developed. This study is an analysis of the movement characteristics of the students acquire d under each scenario. Followings are the summary of the analysis results. In the non-smoke environments, there was no difference in the velocity of escape movement between the case of without block on the familiar route and the case of with unexpected block. However, when the indoor was filled with smoke, the visibility became very low because of the smoke density and the average velocity was 62.5 % slower than the case where it was not. Regardless of the scenarios, the average equivalent velocity on the complex path was faster than the simple straight path, and the standard deviation was smaller. Under the smoke-fullfilled environment, although the relative velocity probability distributions of the complex passage and the entire passag e are very similar, the inter-individual fluctuation of the relative velocity ratio of the complex passage to that of the entire passage was very large. On the other hand, equivalent velocity could be expressed by the logarithmic function of the visibility. Also, as the tension of the students increased, the equivalent velocities were accelerated on all scenarios.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.30-38
• /
• 2006

In this paper, we improved to drops recognition rate according to distance using distance and depth information with 3D from stereo face images. A monocular face image has problem to drops recognition rate by uncertainty information such as distance of an object, size, moving, rotation, and depth. Also, if image information was not acquired such as rotation, illumination, and pose change for recognition, it has a very many fault. So, we wish to solve such problem. Proposed method consists of an eyes detection algorithm, analysis a pose of face, md principal component analysis (PCA). We also convert the YCbCr space from the RGB for detect with fast face in a limited region. We create multi-layered relative intensity map in face candidate region and decide whether it is face from facial geometry. It can acquire the depth information of distance, eyes, and mouth in stereo face images. Proposed method detects face according to scale, moving, and rotation by using distance and depth. We train by using PCA the detected left face and estimated direction difference. Simulation results with face recognition rate of 95.83% (100cm) in the front and 98.3% with the pose change were obtained successfully. Therefore, proposed method can be used to obtain high recognition rate with an appropriate scaling and pose change according to the distance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.218-229
• /
• 2003

A new biotelemetry method that the installation and the treatment of equipment is convenient and the instantaneously detailed location of the fish attached the pinger is able to track comparatively easily was developed. The receiving system in this biotelemetry method was advanced for track the detailed behavior of the fish by the miniature tracking pinger, because it was a burden to fish to add the pinger with the water temperature and the pressure sensor. By combining of the super short base line (SSBL) method to detect the direction of pinger and the pinger synchronizing method to measure the range from receiving transducer to pinger, the three dimensional locations of fish to the receiving transducer is gotten instantaneously. The receiving system is devised to realize the high precision or wide detection range by application of the basic design method for receiving system of biotelemetry developed by the present authors and the hydrophone array configuration. The measurement distance error in the pinger synchronizing method is minimized through the correction of which the deviation of transmission pluse period of pinger is caused by changing water temperature. A prototype system which is able to track the instantaneously detailed location of the fish by the SSBL and pinger synchronizing biotelemetry (SPB) method was produced.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.165-170
• /
• 2014

The objective of this study was to make growth and yield models of sowthistle (Ixeris dentata Nakai) by using an expolinear functional equation in a closed-type plant production system. The growth and yield of hydroponically-grown sowthistle were investigated under four different planting distances ($15{\times}10$, $15{\times}15$, $15{\times}20$, and $15{\times}25$ cm). Shoot dry weights per plant was the highest at $15{\times}25$ cm, but was the lowest at $15{\times}10$ cm. Shoot dry weights per area was the highest at $15{\times}15$ cm, but was the lowest at $15{\times}25$ cm. The optimum planting density and planting distance for yield of sowthistle were 44 plants/$m^2$ and $15{\times}15$ cm, respectively. Shoot dry weights per plant and per area were showed as an expolinear type functional equation. A linear relationship between shoot dry and fresh weights was observed to be linear regardless of the planting distance. Crop growth rate, relative growth rate and lost time in an expolinear functional equation showed quadratic function form. Radiation use efficiency of sowthistle was $4.3-6.1g{\cdot}MJ^{-1}$. The measured and estimated shoot dry weights showed a good agreement using days after transplanting as input data. It is concluded that the expolinear growth model can be a useful tool for quantifying the growth and yield of sowthistle in a closed-type plant production system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.355-373
• /
• 2017

Tunnelling in urban areas, it is essential to understand existing structure-tunnel interactive behavior. Serviced structures in the city are supported by pile foundation, since they are certainly effected due to tunnelling. In this research, thus, pile load distribution and ground behavior due to tunnelling below grouped pile were investigated using laboratory model test. Grouped pile foundations were considered as 2, 3 row pile and offsets (between pile tip and tunnel crown: 0.5D, 1.0D and 1.5D for generalization to tunnel diameter, D means tunnel diameter). Soil in the tank for laboratory model test was formed by loose sand (relative density: Dr = 30%) and strain gauges were attached to the pile inner shaft to estimate distribution of axial force. Also, settlements of grouped pile and adjacent ground surface depending on the offsets were measured by LVDT and dial gauge, respectively. Tunnelling-induced deformation of underground was measured by close range photogrammetric technique. Numerical analysis was conducted to analyze and compare with results from laboratory model test and close range photogrammetry. For expression of tunnel excavation, the concept of volume loss was applied in this study, it was 1.5%. As a result from this study, far offset, the smaller reduction of pile axial load and was appeared trend of settlement was similar among them. Particulary, ratio of pile load and settlement reduction were larger when the offset is from 0.5D to 1.0D than from 1.0D to 1.5D.