• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1245-1249
• /
• 2015

This study investigated the reflection spectra of wrinkled metal/polymer multilayers. A wavy surface was self-assembled by annealing an aluminum-coated poly(methyl metacrylate) layer on a silicon substrate. The total and diffuse reflectance characteristics of the sample with additional metal coatings(aluminum or silver) were evaluated in the visible wavelength(400~800 nm) using a spectrophotometer. The results showed that the wrinkled surface enhanced the diffuse reflectance up to 40~50% in the lower-wavelength range, demonstrating its potential for applications to optical thin-film devices.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.51-51
• /
• 2002

나노기공물질은 특정 기반물질(matrix) 내부에 대략 나노미터크기의 기공을 함유하고 있는 물질이며 나노기공물질의 특성은 기반물질의 특성과 더불어 기공의 형태, 크기, 분포에 의해서 결정된다. 나노기공물질의 기공에 대한 정보를 측정하는 방법으로는 TEM, 흡착법, FE-SEM과 더불어 중성자 또는 X-ray 빔의 산란을 이용하는 소각중성자산란 (Small-Angle Neutron Scatering, SANS), 소각 X-ray 산란 (Small-Angle X-ray Scattering, SAXS), 중성자반사율측정 (Neutron Relfectimetry, NR), X-ray 반사율측정 (X-Ray Reflectometry, XRR) 등이 사용되고 있다. 본 발표는 대략 1 nm - 100 nm 영역의 bulk 구조와 층상구조를 측정할 수 있는 소각 중성자 산란과 중성자 반사율 측정기법을 이용한 나노기공 측정기술을 다룬다.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.129-139
• /
• 2008

The purpose of the present work is to derive the reflection and transmission coefficients of $S_0\;and\;A_0$ mode Lamb waves in relation to the geometry of a rectangular notch when the waves propagate across the notch in an elastic plate. Firstly, the excitable modes of the Lamb wave were analyzed with respect to the plate thickness. The scattering phenomena were divided into three independent processes according to the boundary shape of the notch and the direction of the wave propagation. Linear equations for each process were derived with corresponding free or continuous boundary conditions to analyze the scattered waves. By the rule of linear superposition, the waves scattered at each process were summed for each mode. Then the steady-state reflection and transmission coefficients of the scattered waves were determined so that the difference of energy flux between the incident and the scattered waves would remain within 4%.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.499-505
• /
• 1997

A non-invasive technique to measure absorption and scattering coefficients was investigated The reflected backscattered light from the surface of phantom and biological tissue was obtained by using a time-correlated single photon counting system in pico-second time domain. The absorption and scattering coefficients were acquired by the time of peak and asymptotic behavior of the time-resolved reflectance curve and agreed well the ones that is obtained with deconvolution method It was found that the approximation method was good for biological medium to calculate optical properties due to its convenience and accuracy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.334-344
• /
• 2009

In the present paper, analytic solutions are derived for scattering of obliquely incident waves by a semi-infinite breakwater or a breakwater gap of partial reflection. In order to examine the appropriateness of the derived solutions, they are compared with the solutions derived by McIver in 1999 and Bowen and McIver in 2002 for a semi-infinite breakwater and a breakwater gap, respectively, in the case of perfect reflection. The derived analytic solutions are used to investigate the effect of reflection coefficient of the breakwater and wave incident angle upon the tranquility at harbor entrance. The tranquility is deteriorated by the reflected waves as the reflection coefficient increases and as the waves are incident more obliquely.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.134-140
• /
• 2009

In this study, the influence of surface roughness on light scattering from Au pads on a PCB surface was investigated. Angular distributions of light scattered from Au pads with different surface roughness were measured for several incident angles. Diffusely-scattered light could be separated by using the fact that the amount of specularly-scattered light was directly related to surface roughness. The separated diffuse term was curve-fitted with a physics-based model, and then the related scattering parameters were extracted and compared with measured parameters.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.62-63
• /
• 2000

다양한 분야의 요구에 따라 반사율이 99.995% 이상인 고반사 저손실 반사경의 제작이 가능해 지면서 반사경의 산란, 투과, 흡수 및 손실 등을 측정하는 여러 측정 방법들도 더불어 연구되어 왔다. 적용 분야에 따라 사용될 반사경의 특성이 결정되는데 그 중 중력파 측정 장치$^{(1)}$ , 광자 감쇠 분광기$^{(2)}$ 등의 분야에서는 투과, 산란 및 흡수가 모두 작은 저손실 반사경을 요구한다. 한편 링 레이저 자이로스코프의 경우 반사경의 산란이 곧 lock-in을 결정하여 성능을 제한하는 중요한 변수가 된다. 따라서 이 응용의 경우 반사경의 산란을 정확히 측정하는 일은 중요하며 위치에 따른 산란분포 정보를 알면 링 레이저 자이로스코프의 성능 예측과 개선이 더욱 쉬워진다. 산란을 측정하는 직접적인 방법에는 ARS(angle resolved scattering)과 TIS(total integrated scattering)이 있는데, 본 연구에서는 TIS 측정 장비를 반사경의 위치에 따른 산란분포까지 측정할 수 있도록 mapping 기능을 첨가하고 이온빔 스퍼터링에 의해 제작된 저산란 반사경을 측정하기 위해 높은 분해능을 갖도록 구성하였다. 반사경의 응용분야의 필요에 의해 45$^{\circ}$ 산란을 측정하였다. (중략)

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.174-186
• /
• 2009

When we apply a propagation model to the ocean with boundaries, we can calculate reflected wave using reflection coefficient suggested by Rayleigh assuming the boundaries are flat. But boundaries in ocean such as sea surface and sea bottom have an irregular rough surface. To calculate the reflection loss for an irregular boundary, it is needed to compute the coherent reflection coefficient based on an experimental formula or scattering theory. In this article, we derive the coherent reflection coefficients for a fluid-fluid interface using perturbation theory, Kirchhoff approximation and small-slope approximation respectively. Based on each formula, we can calculate coherent reflection coefficients for a rough sea surface or sea bottom, and then compare them to the Rayleigh reflection coefficient to analyze the reflection loss for a random rough surface. In general, the coherent reflection coefficient based on small-slope approximation has a wide valid region. Comparing it with the coherent reflection coefficients derived from the Kirchhoff approximation and perturbation theory, we discuss a valid region of them.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.183-193
• /
• 2007

Analytic solutions are derived for wave scattering by a semi-infinite breakwater or a breakwater gap with partially reflective front and fully reflective back. The water depth is constant and a regular wave train is normally incident to the breakwater. Wave scattering is studied based on the linear potential wave theory. The governing equation is transformed into ordinary differential equation by using the method of variation of parameters and coordinate transformation. Comparison with finite element numerical solution shows that the analytic solution obtained in this paper gives quite good results. Using the analytic solution, the tranquility of harbor entrance is investigated by changing the reflection coefficient at the breakwater.