• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.458-466
• /
• 1993

Natural convection in trapezoidal sections of cavity was numerically investigated using a Finite Volume Method. Temperatures of the upper inclined and lower horizontal walls are constant, with vertical side walls being insulated. When the top wall is hotter than the bottom one, a single cell of stratified flow field is obtained and heat transfer occurs only by conduction. For the colder top wall, bifurcation solutions are obtained for the higher Rayleigh numbers, while unique solutions for lower values. Flow structure is strongly dependent on the configuration and the Rayleigh number.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.268-273
• /
• 2002

A modeling method for the dynamic characteristic analysis of a translationally accelerated trapezoidal cantilever plate is presented in this paper. The equations of motion for the plate are derived and transformed into a dimensionless form. The effects of the inclination angles and the acceleration on the vibration characteristics of the plate are investigated. Incidentally, natural frequency loci veering and associated mode shape variations are observed and discussed

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.987-995
• /
• 2006

A reversed trapezoidal fin with the fluid in the inside wall is analyzed and optimized in this study. As a fin base boundary condition, the heat transfer from inside wall fluid to the fin base is considered. The values of fin base temperature with the variations of inside wall fluid convection characteristic number and fin base length are listed. The heat transfer, fin effectiveness, fin length and fin base height are optimized as a function of fin base length, convection characteristic number ratio, fin shape factor and fin volume.

• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.788-794
• /
• 2014

In this paper, the transient response analysis of the trapezoidal corrugated plate subjected to the pulse load is investigated by the theoretical method. Three types of pulse loads are considered: stepped, isosceles triangular and right triangular pulse loads. The corrugated plates can be represented as an orthotropic plate. Both the effective extensional and flexural stiffness of this equivalent orthotropic plate are considered in the analysis. The plate is stiffened by concentric stiffeners perpendicular to the corrugation direction. The stiffening effect is represented by the discrete stiffener theory. This theoretical results are validated by those obtained from 3D finite element analysis based on shell elements. Some numerical results are presented to check the effect of the geometric properties.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제45권2호
• /
• pp.177-189
• /
• 2006

This study focuses on the analysis of prospective elementary teachers' representation of trapezoid area and teacher educator's reflecting in the context of a mathematics course. In this study, I use my own teaching and classroom of prospective elementary teachers as the site for investigation. 1 examine the ways in which my own pedagogical content knowledge as a teacher educator influence and influenced by my work with students. Data for the study is provided by audiotape of class proceeding. Episode describes the ways in which the mathematics was presented with respect to the development and use of representation, and centers around trapezoid area. The episode deals with my gaining a deeper understanding of different types of representations-symbolic, visual, and language. In conclusion, I present two major finding of this study. First, Each representation influences mutually. Prospective elementary teachers reasoned visual representation from symbolic and language. And converse is true. Second, Teacher educator should be prepared proper mathematical language through teaching and learning with his students.

• 설비공학논문집
• /
• 제18권2호
• /
• pp.95-102
• /
• 2006

This study analyzes and optimizes a design for a trapezoidal profile straight fin using one-dimensional analytical method. The heat transfer, fin length and fin height are optimized as a function of fin volume, fin shape factor and fin base length. In this optimization, convection characteristic number over fin surface and that of fluid inside fin wall are considered. One of the results shows that the maximum heat loss increases as fin volume increases and both fin shape factor and fin base length decrease.

• East Asian mathematical journal
• /
• 제31권2호
• /
• pp.167-188
• /
• 2015

Formula for the area of a trapezoid is an educational material that can handle algebraic and geometric perspectives simultaneously. In this note, we will make up the expression equivalent algebraically to the formula for the area of a trapezoid, and deal with the conversion of a geometric point of view, in algebraic terms of translating and interpreting the expression geometrically. As a result, the geometric conversion model, the first algebraic model, the second algebraic model are obtained. Therefore, this problem is a good material to understand the advantages and disadvantages of the algebraic and geometric perspectives and to improve the mathematical insight through complementary activity. In addition, these activities can be used as material for enrichment and gifted education, because it helps cultivate a rich perspective on diverse and creative thinking and mathematical concepts.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.531-533
• /
• 2017

본 논문에서는 퍼지 영상처리 기법을 이용하여 손뼈의 X-Ray 영상에서 손뼈의 윤곽선을 추출하는 방법을 제안한다. 제안된 방법에서는 전 처리 단계로써 감마 상관관계를 이용하여 X-Ray 영상에서 손뼈를 제외한 피부층을 제거한다. 피부층이 제거된 영상에서 손뼈를 뚜렷하게 만들기 위해 샤프닝 기법을 사용한다. 샤프닝 기법이 적용된 영상에서 손뼈의 명암대비를 선명하게 하기 위해 사다리꼴 형태의 Fuzzy Stretching 기법을 적용한다. 사다리꼴 형태의 Fuzzy Stretching 기법을 적용한 영상에서 Canny Edge 기법을 적용하여 손뼈의 윤곽선을 추출한다. 제안된 추출 방법을 20개의 실험 영상을 대상으로 실험한 결과, 16개의 실험 영상에서는 손뼈의 윤곽선이 정확히 추출되었고 4개의 실험 영상에서는 손뼈의 윤곽선이 손실된 상태로 추출되었다.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1486-1491
• /
• 2003

A modeling method for the modal analysis of a composite trapezoidal plate undergoing in-plane translational acceleration is presented in this paper. The equations of motion for the plate are derived and transformed into a dimensionless form. The effects of the inclination angles, fiber orientation angle and the acceleration on the modal characteristics of the plate are investigated.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.377-383
• /
• 2012

변화되는 위 측면 기울기를 가진 비대칭 사다리꼴 핀의 온도분포가 2차원 해석적 방법을 사용하여 조사되어 진다. 이 비대칭 핀을 위해, 내부유체로부터 내벽까지의 대류, 내벽으로부터 핀 바닥까지의 전도, 그리고 핀 바닥을 통한 전도가 동시에 고려된다. 무차원 핀 길이와 높이좌표 변화에 따른 온도 형상이 보여진다. 또한 핀 아래 끝에서 온도 변화가 핀 형상계수의 함수로 나타내어진다. 핀 길이의 변화에 따라 핀 바닥을 통한 열손실과 각 면으로부터의 열손실들이 비교된다. 결과들 중 하나는 핀형상계수가 증가함에 따라 핀 아래 끝에서 온도는 선형적으로 감소함을 보여준다.