• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.95-96
• /
• 2008

사회가 발전함에 따라 전력 수요는 기하급수적으로 증가한다. 늘어나는 전력 수요는 전압안정도 마진을 감소시키고 이는 대정전의 원인이 될 수도 있기 때문에 전력계통에서 전압유지 및 전압안정도 여유확보는 중요한 이슈가 된다. 무효전력은 전압과 큰 관련이 있기 때문에 전압유지 및 전압안정도 여유확보 방안으로써 가장 최우선적으로 고려되는 사항이 조상설비를 추가하는 것이다. 하지만 조상설비를 추가하기 위한 용지확보, 비용, 환경문제 등의 영향으로 인한 전원의 원격화, 편재화 그리고 부하의 수요집중화에 의한 송전설비의 장거리화와 대용량화가 진행되고 있으며 이와 같은 장거리 송전에 따라 계통손실의 증가와 수요지의 저전압문제가 발생하고 있다. 그러므로 전압안정도 마진을 고려하면서 조상설비를 적절하게 투입하는 것은 중요한 고려사항이다. 본 논문은 2007년 8월 EMS Peak 데이터를 시뮬레이션 해 조상설비를 투입함에 있어 최적의 위치와 용량을 산정하는 위한 방안을 제시한다. 이러한 조상설비 추가를 최소로 하는 경제적인 측면 뿐 아니라 전압 안정성 측면도 고려하기 위한 부하 scaling 기법을 적용해 전압안정도 여유를 확보하기 위한 방안을 추가한다. 또한 여러 가지 상정사고를 가정한 후 heuristic method를 적용해 조상설비 최적화를 수행하고 한전데이터를 근거로 추가할 조상설비의 가장 적절한 투입위치 및 용량을 산정해 제시한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.111-116
• /
• 2022

The causes of motor burnout include overload, phase loss, restraint, interlayer short circuit, winding ground fault, instantaneous overvoltage, and the rotor contacting the stator, leading to insulation breakdown, leading to breakdown or electrical accidents. Therefore, equipment failure causes not only loss due to cost required for equipment maintenance/repair, but also huge economic loss due to productivity decrease due to process stop because the process itself including the motor is stopped. The current level of technology for diagnosing motor failures uses vibration, heat, and power analysis methods, but there is a limit to analyzing the problems only after a considerable amount of time has passed according to the failure. Therefore, in this paper, a device and algorithm for measuring insulation resistance using DC AMP signal was applied to an industrial motor to solve this problem. And by following the insulation resistance state value, we propose a diagnosis of deterioration and failure of the motor that cannot be solved by the existing method.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.91-98
• /
• 2020

Since disaster-safety accidents cause serious damage to human life and property, preparations and responses have been critically challenged by the country and industry. Recently, the government and industry have recognized its importance and are seeking solutions to the causes of disasters in various ways. If virtual reality technology is actively used, it will be easier to prepare and train for disasters, as the social costs will be reduced. However, academic research on this has not been actively studied. In particular, it seems difficult to seek data that comprehensively analyzes or organizes disaster-safety with virtual reality contents. In this paper, we analyze the current status of domestic and overseas focused on virtual reality disaster/safety contents, examine its characteristics, and point out the direction required for advanced service in the future. To this end, the implications of the numerical data of the accident type have been derived, and the direction of development of public institutions, academic research, and industry have also been investigated. Finally, technical considerations are presented as well.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.643-653
• /
• 2020

The concrete lining inspection by inspector after traffic control poses various problems such as congestion caused by traffic control and social loss costs resulting from it, and risks of traffic accidents and safety accidents for inspectors et al. To solve the problems, the concrete lining inspection has been carried out using automatic inspection equipment and image analysis that can be objectively and quantitatively investigated in overseas. In this study, to solve the problems of concrete lining inspection by inspector and to review improvement plan for inspection, inspection was carried out using automatic inspection equipment for ◯◯ tunnel that precision safety diagnosis has been conducted in 2019. Analysis was carried out for both inspection results. Automatic inspection equipment investigated defects in concrete lining such as cracks more accurately than precision safety diagnosis.

• Journal of Information Technology and Architecture
• /
• v.11 no.2
• /
• pp.143-155
• /
• 2014

In recent years, domestic electronics, banking, electricity, services, manufacturing, pharmaceutical, corporate type and malicious hackers is corporate security through the accident occurred and the resulting loss of corporate information and the damage each year is steadily increasing. Many companies have responded to domestic business activities and to protect critical information related to laptops, smart phones, tablets, and introduced a variety of Endpoint security solutions within. However, being introduced to senselessly Endpoint security solution across the over-budget, with the same features and performance, such as conflicts and problems arise, resulting in additional maintenance costs, in an effort to resolve the conflict in the operational security of the IT department's new difficulty in becoming. Here is the introduction and operation of these Endpoint security solutions in order to solve the problem on employees's PC into the center of the information security governance based on Endpoint security solution to provide the process for determining the solutions presented.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.1-10
• /
• 2005

Electronic Data Interchange(EDI) between a number of companies goes on increasing on the internet. Although a conventional EDI system reduces business process efforts, time, resources, etc., important information is easily and frequently exposed by well trained hackers and crackers, which inflict a severe loss on the company and even put the company under a crisis. This study integrates the conventional EDI system and Virtual Private Tet(VPN) to maximize an overall efficiency of speed and security in data transferring by the level of importance. The EDI system interfaced to IPSec and L2TP of VPN allows us to select two modes : the one focuses on a high speed with a low or a medium level security or the other does on a high level security with a low or a medium level speed. Both the company and the end users get a lot of tangible and intangible advantages by integrating the EDI system and VPN.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.172-178
• /
• 2012

Packaged power systems are very convenient for transferring and installing, and can supply electric power steadily for the areas which have a great difficulty in drawing power line from the outside. Then, the equipments have been widely used in such mountain areas and the back of beyond. Generally, compressed air has been employed to start the dynamo-engines for P.P.S. However, these systems necessitate air compressors, air tanks, air starting motors and pipe lines for transferring compressed air etc. Recently, starting systems which have only batteries and series DC motors as whole automobiles have been applied due to their simplicity and economy. In this paper, developed new starting motor for the P.P.S. And we achieved the better results from performance tests.: Output power, torque and speed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.669-673
• /
• 2012

제방안전성 모니터링은 제방파괴로부터 국민의 생명과 재산을 보호하는데 필요한 정보를 얻을 수 있는 하나의 방법이 될 수 있다. 근래에 미국은 2005년 허리케인 카타리나에 의해 2,000여명의 인명손실을 경험하였고 2011년 3월 일본은 도후쿠지역의 초강력 지진에 의한 쓰나미로 인해 수만명의 인명과 후쿠시마 원자력 발전소의 침수로 지금까지 방사능 누출 차단작업을 벌이고 있다. 국내에서는 4대강 복원사업으로 주요 국가 하천 구간에서 홍수 및 체제 불안정에 의한 제방붕괴사고위험이 현격하게 줄어들었으나 제방의 안전성은 더욱 강조되고 있다. 즉 신설된 보 주변, 배수통문 신설구간 그리고 제방누수 예상지점 등에서는 아직 안전한 상태라고 확신할 수 없으며 지속적인 모니터링이 요구된다. 따라서 본 연구에서는 광섬유를 이용하여 개발한 간극수압 및 온도 센서 등을 위험예상지점에 설치하고 정보시스템을 통하여 어떻게 관리 할 것인가에 대한 사전 검토를 계획하였다. 이를 위하여 제방에 센서를 설치하기 전에 주요 검토사항에 대하여 연구분석하였다. 주요 검토사항에는 설치하고자 하는 지점의 제방거동 메커니즘 예측, 왜 계측시스템을 설치하는지에 대한 목적에 대한 평가, 설치 지점의 제방의 토질공학적 문제점 파악, 모니터링 대상 매개변수 혹은 항목 선정, 조사대상 항목의 변화정도를 예측하여 거동 범위 확정, 적정 계측기기 설치 지점을 선청, 계측기기 선정, 자동화 혹은 실시간 정보시스템에 필요한 사항 결정, 관측에 영향을 미치는 인자들의 기록 계획, 정보의 타당성 확보를 위한 필요사항 정립, 비용의 결정, 장기 예측 계획, 정기 검 보정 및 관리 계획, 자료수집 및 관리계획, 자원의 공조 및 생애주기 비용 등을 포함하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.175-180
• /
• 2015

With progress in industrialization, facilities for generating, delivering, and receiving high levels of electric power are in great demand. The scale of electric power equipment is increasing in both size and complexity. This has contributed to the development of our modern, high-tech and information-based society. However, if the generation of electric power is suspended due to unexpected accidents at power facilities or power stations, a range of equipment the operations of which are dependent on electric power can be damaged, causing substantial socioeconomic losses in an industrial society. A great deal of time and money would be expended to repair damaged facilities at a power station, causing enormous economic loss.In order to detect the deterioration processes of power cables, and to prevent the destruction of power cables, the operation status of power cables should be monitored on a regular basis. We have installed equipment at Korea Western Power Co., Ltd., located in Taean, in order to predict and prevent the destruction of power cables. This is an entirely new installation: a set of equipment invented specifically to measure the insulation resistance of power cables. Installation of the equipment does not cause the flow of earth fault current. This ensures accurate measurement of insulation resistance values by the equipment. We have been studying this equipment in order to develop preventive technology that would show the deterioration processes of power cables.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.99-106
• /
• 2013

Personal information protection has become one of the most impending business issues because leakage of personal information can cause tremendous financial losses and image degradation. Consequently, personal information protection initiatives have been recognized widely in business. To invigorate personal information protection investments, performance measurement method such as cost benefits analysis or qualitative analyses are needed, which have not been studied enough in the previous studies. This study proposes a performance measurement model which can include quantitative and qualitative analyses in the context of personal information protection investments. A comparative analysis has been performed on security investment and IT investment performance measurements, which leads to choose the WiBe method (developed by the German Interior Ministry), considering the privacy characteristics and the method's applicability. In particular, the quantitative effect measured how proactive threat assessment based on the way according to the nature of the businesses and organizations of privacy and possible investment decisions. This study proposes the 16 performance indicators, which turn out to be meaningful in terms of their materiality and feasibility by conducting focus group interviews of 25 experts on personal information protection.