• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.219-225
• /
• 2011

Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms($M_x$) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.63-66
• /
• 2004

본 논문에서는 채널간간섭 자기소거를 위한 부대역 부호화기법에 따른 직교 주파수분할다중화의 첨두전력대 평균전력비가 분석된다. 인접부대역에 대척신호를 할당하는 기존 상관부호화의 경우 전송신호열에서 형상성분이 발생되며, 이로 인하여 직교 주파수분할다중화 시스템의 첨두전력 대 평균전력비가 최대 3dB 가량 증가됨을 이론적$\cdot$실험적으로 검증한다. 그리고 이와 같은 형상성분을 제거할 수 있는 새로운 부대역 부호화기법이 제시된다. 여기서는 인접부대역에 할당되는 신호쌍의 위상차가 신호사상기의 출력에 따라 변화된다. 그 결과, 새로운 부대역 부호화기법이 적용된 시스템은 기존의 시스템보다 $2\~3dB$ 적은 첨두전력 대 평균전력비를 가지는 것을 확인할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1368-1372
• /
• 2007

바닥이 언덕과 저면으로 이루어진 연속적인 횡방향 바닥형상을 갖는 개수로 흐름의 부유사 농도분포를 수치모의 하였다. 비선형 ${\kappa}-{\varepsilon}$ 모형을 이용하여 흐름의 지배방정식인 곡선 직교좌표계에 대한 Navier-Stokes 방정식을 해석하였으며, 와점성계수 개념을 이용하여 부유사 수송 방정식을 해석하였다. 기존의 실험결과와 비교하여 모형이 격자형 이차흐름을 비교적 잘 예측하는 것을 확인하였으며, 동일한 흐름에 대하여 부유사 농도 분포를 계산하였다. 부유사량의 계산 결과 언덕 위의 부유사 농도분포가 저면 위의 농도분포보다 크게 나타났다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.621-632
• /
• 2007

The purpose of this study was the estimation and formulation of orthotropic flexural rigidities considering the deformed shape for a plate stiffened with rectangular ribs. Analytical results of methods modifying the flexural rigidity of the x-direction, the y-direction or both directions were compared at the center, the x-directional quarter point and the y-directional quarter point of stiffened plates loaded at the center. The composite method modifying the flexural rigidity of both directions improves the accuracy compared with the other methods. Moreover, the ratio of modified coefficients for each directional rigidity can be expressed as a function corresponding to each dimension of stiffened plates. The application of modified coefficient functions to various types of stiffened plates with different boundary conditions, aspect ratios and rib arrangement shows that the increment of the error ratio is small compared with examples of this study and the application of proposed functions shows more accurate results than previous methods modifying the flexural rigidity. Therefore, by using the modified coefficient functions proposed in this study, the orthotropic plate analysis of plates stiffened with rectangular ribs can easily achieve more accurate displacement results.

• Composites Research
• /
• v.16 no.5
• /
• pp.28-38
• /
• 2003

In this study, the analytical investigation of orthotropic rectangular plate is presented. The loaded edges are assumed to be simply supported and the unloaded edges could have elastically restrained boundary conditions including the extreme boundary condition such as simple, fixed, and free. Using the closed-form solutions, the buckling analyses of orthotropic plate with arbitrary boundary conditions are performed. Based on the data obtained by conducting numerical analysis, the simplified form of equation for finding the buckling coefficient of plate with elastically restrained boundary conditions at the unloaded edges is suggested as a function of aspect ratio, elastic restraint. and material properties of the plate. The results of buckling analyses by closed-form solution and simplified form of solution are compared for various orthotropic material properties. It is confirmed that the difference of results is less than 1.5%.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.59-65
• /
• 2010

The simple supported reinforced concrete slab bridges are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. By using the "correction factor", the accurate solution for the plate can be obtained by the beam theory. By using the "correction factor", the accurate solution for the plate can be obtained by the beam theory. The plate aspect ratio considered is from 1 : 1 to 1 : 6. The result of this paper can be used for simply supported slab bridges analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.73-82
• /
• 1983

초기결함을 가진 직교이방성원통셸이 축방향스텝하중을 받은 때의 동적좌굴을 연구하였다. 원통 쉘의 운동방정식은 비선형 Donnell 방정식을 사용하였으며 변위식에는 6개항을 채용하였다. 좌굴 조건은 원통셸의 수직변위와 길이변화의 급격한 변화로써 정의하였다. 좌굴모우드형상은 초기결 함과 쉘재료의 이방성에 따라 달라짐은 발견하였고 좌굴강도는 초기결함의 증가에 따라 크게 감 소된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.561-567
• /
• 2011

The inverse radiation analysis of a two-dimensional irregular configuration using unstructured triangular meshes is presented. In this study, an enclosure filled with an absorbing, emitting and scattering medium with diffusely emitting and reflecting opaque boundaries is considered. The finite volume method is applied to solve the radiative transfer equation in order to simulate the measured incident radiation values which are used as input data for the inverse analysis. The conjugate gradient method is adopted for the estimation of wall emissivities by minimizing the objective function at each iteration step. To verify the performance of the unstructured grid system, we compare the results with those using a structured grid system for the two-dimensional lopsided shape. The effect of measurement errors on the estimation accuracy is also investigated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2005

In this paper, peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) with respect to the subchannel coding schemes for interchannel interference (ICI) self-cancellation is analyzed. It is shown theoretically and experimentally that a shaping component is generated in the transmitted sequence in the conventional correlative coding where a pair of antipodal signals is assigned in adjacent subchannels. Due to the shaping component, the signal powers in the mid and edges of a symbol are scaled by different weighting coefficients, resulting in increased PAPR. To overcome this problem a simple adjacent subchannel coding scheme is presented in this paper. In the new scheme, the shaping component caused by partial repetition of signals is eliminated by assigning a pair of signals in which phase difference varies signal-to-signal. As results, the new scheme has 2-3 dB smaller PAPR than the conventional ICI self-cancellation OFDM while maintaining much higher carrier-to-interference ratio than a normal OFDM system.

• Composites Research
• /
• v.29 no.5
• /
• pp.236-242
• /
• 2016

In this work, tensile and in-plane shear tests for thermoplastic glass fiber/polypropylene composites were performed at a thermo-forming temperature and their properties were characterized and mathematically expressed by using the non-orthogonal constitutive model. As for the thermo-forming test, half-dome experiments were carried out by varying the usage of a releasing agent and the weight of holders. As results, the optimum final shape having well-aligned symmetry and no wrinkle formation was obtained when the releasing agent was used, and it was found that the careful control of a holding force is crucial to manufacture the healthy product. Furthermore, FEM simulations based on the non-orthogonal model showed similar final shapes and tendency of wrinkle formation with experimental results, and confirmed that wrinkles increase with less holding force and higher punch force is required under high frictional condition.